Directory Search Results

Print List

#250402051

Range of electronic, touch free, wall-mounted taps (chromium plated brass. The flow is controlled by a solenoid valve activated via an infra-red sensor. The spout outlet incorporates a plastic aerator. Maximum working pressure 8.0 Bar Maximum operating temperature 65.0°C

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Tap(s) with a non-touch methods of flow control and a single inlet.
WRAS Approval Number:
250402051
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
3/4" BSP (M) x 1/2" BSP (M) offset unions
Marking:
STERN logo on body
Installation Requirements:
R001 R040
Expiry date:
30/04/2030
Model:
314500 – Apollo Medical B 314510 – Apollo Medical E 314520 – Apollo Medical FB 314540 – Apollo Medical FE 314505 – Apollo Medical B LF 314515 – Apollo Medical E LF 314535 – Apollo Medical FB LF 314545 – Apollo Medical FE LF 314600 – Medical 1000TE 314605 – Medical 1000TE LF 314610 – Medical 1000 TMV E

Approval Holder:
Y. Stern Engineering (1989) Ltd
Company Name
Y. Stern Engineering (1989) Ltd
Address
15 Gan Rave Blvd. Yavne
Postcode
8122217
Country
Israel
Phone
+972 8 9326007
General Email
leah@sternfaucets.com

View All Listings by this Company

Print This Approval


#250401701

WC Cistern incorporating a side or bottom entry float operated inlet valve and a dual flush Drop Valve (Acclaim V) or Syphon (Acclaim S) of full flush volumes of up to 6 litres and a reduced flush of up to 4 litres. The cistern can be operated by lever or manual push button. Maximum working pressure 10.0 bar. Cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
250401701
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
½” BSP Male inlet connection.
Marking:
‘Cascade +’ or ‘Dudley Turbo’ on syphon. ‘Dudley’ and ‘TD’ on drop valve ‘HYDROFLO’.‘DUDLEY BS 1212/4’ inlet valve, Thomas Dudley Ltd on cistern. 6 litre line inside cistern
Installation Requirements:
R001 R280 R556
Expiry date:
30/04/2030
Model:
Acclaim V & Acclaim S.

Approval Holder:
Thomas Dudley Limited
Company Name
Thomas Dudley Limited
Postcode
DY1 4SJ
Country
United Kingdom
Phone
0121 530 7053
General Email
jcresswell@thomasdudley.co.uk

View All Listings by this Company
Manufacturer:
Thomas Dudley Limited
Company Name
Thomas Dudley Limited
Postcode
DY1 4SJ
Country
United Kingdom
Phone
0121 530 7053
General Email
jcresswell@thomasdudley.co.uk

View All Listings by this Company

Print This Approval


#250402016

Range of wall mounted, two-hole, single outlet (fixed) combination tap assemblies (brass bodies - various finishes) incorporating a ceramic cartridge headwork with a single lever operating member. The product incorporates a self-cancelling diverter to shower outlet with Type HC backflow protection device (verified by test - suitable for backflow protection against Fluid Category 3) Maximum working pressure 10.0 Bar Maximum operating temperature 60.0°C

Section:
0531 Combination Tap Assemblies
Section Subtitle:
Two hole tap(s) with a single outlet and a fixed spout, incorporating a self-cancelling diverter to shower outlet with Type HC backflow protection device (verified by test - suitable for backflow protection against Fluid Category 3)
WRAS Approval Number:
250402016
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
3/4" BSP (M) X 1/2" BSP (M) offset union
Marking:
Hansgrohe logo on operating member.
Installation Requirements:
R001 R040
Expiry date:
30/04/2030
Model:
75 423 xx0 Where xx0 denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.

Manufacturer:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Country
Germany
Phone
+49 170 4471 718

View All Listings by this Company

Print This Approval


#250102065

Range of two-hole, single outlet (fixed) combination tap assemblies (chrome plated brass body). Incorporating quarter turn ceramic disc headworks, dome type operating members and a manual diverter to shower outlet. The spout outlet incorporates a plastic aerator or flow straightener. The products are supplied with metal backnuts. Maximum working pressure 10.0 Bar. Maximum operating temperature 70.0°C

Section:
0551 Combination Tap Assemblies
Section Subtitle:
Two hole tap(s) with a single outlet and swivel spout, incorporating a manual diverter to a shower outlet
WRAS Approval Number:
250102065
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Note:
Products are not supplied with shower hose or handset.
Size:
3/4" BSP (M)
Marking:
SONAS on body
Installation Requirements:
R001 R006 R010
Expiry date:
31/01/2030
Model:
UBR0201 (in Chrome) UBR0202 (in Matt Black) UBR0203 (in Brushed Gold) UBR0204 (in Brushed Nickel) UBR0209 (in Chrome) UBR0210 (in Matt Black) UBR0211 (in Brushed Gold) UBR0212 (in Brushed Nickel)

Approval Holder:
Sonas Bathrooms
Company Name
Sonas Bathrooms
Address
103 Northwest Business Park Ballycoolin, Dublin 15
Postcode
D15 R88
Country
Ireland

View All Listings by this Company

Print This Approval


#250303303

Section:
1670 Shower Outlets
Description:
A Range of Shower kit(s)
Hose retainer
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Installation Requirements:
R001 R040
Expiry date:
31/03/2030

Product IdentificationSurface finishInlet DimensionMax Wrk. PressureMax Op. Temp.MarkingMarking LocationAll metals in the water pathway are on the 4msi positive listHeadworkFixing TypeSpout Outlet Includes
FLKIT40 CChrome1/2" BSPOpen Outlet bar60 °CBristanHandsetNoNot applicableNot ApplicableNot ApplicableFlow Regulator Fitted, Shower Hose, Handset, Riser Rail,
FLKIT60 CChrome1/2" BSPOpen Outlet bar60 °CBristan HandsetNoNot applicableNot ApplicableNot ApplicableFlow Regulator Fitted, Shower Hose, Handset, Riser Rail,
FLKIT80 CChrome1/2" BSPOpen Outlet bar60 °CBristanHandsetNoNot applicableNot ApplicableNot ApplicableFlow Regulator Fitted, Shower Hose, Handset, Riser Rail,
Product Images

Approval Holder:
Bristan Group Ltd.
Company Name
Bristan Group Ltd.
Address
Birch Coppice Business Park Dorden Tamworth
Postcode
B78 1SG
Country
Staffs
Phone
01827 254144
General Email
hmistry@bristan.com

View All Listings by this Company

Print This Approval


#250402705

Range of spring loaded resilient trim check valve cartridges with plastic bodies. For insertion into fittings with specifically sized bores. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C

Section:
0026 Backflow Prevention Devices
Section Subtitle:
SCHEDULE 2 - Section 6.2 Check Valve Cartridge. The cartridges listed in this section are for factory installation only and are not suitable for on-site installation.
WRAS Approval Number:
250402705
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
DN13 – DN25
Marking:
Korie, size and flow arrow on body
Installation Requirements:
R001
Expiry date:
30/04/2030
Model:
KORIE DN13, DN13200000 – DN13 KORIE DN15, DN15200000 – DN15 KORIE OV15, OV15200000 – DN15 KORIE OV20, OV20200000 – DN20 KORIE OV25, OV25200000 – DN25

Manufacturer:
Yuhuan Korie Plastics Co., Ltd.
Company Name
Yuhuan Korie Plastics Co., Ltd.
Address
Technology Industry Functional Area, Chumen Village, Yuhuan, Zhejiang
Country
China

View All Listings by this Company

Print This Approval


#250404703

Spring loaded resilient trim check valve cartridge with plastic body and EPDM ‘O’-rings. For insertion into fittings with specifically sized bores. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.

Section:
0026 Backflow Prevention Devices
Section Subtitle:
SCHEDULE 2 - Section 6.2 Check Valve Cartridge. The cartridges listed in this section are for factory installation only and are not suitable for on-site installation.
WRAS Approval Number:
250404703
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
DN15
Marking:
Watts logo & DN15 on body.
Installation Requirements:
R001
Expiry date:
30/04/2030
Model:
149B040135 Type TK model IO

Approval Holder:
Socla SAS
Company Name
Socla SAS
Address
365, Rue du Lt Putier, 71530 Virey Le Grand, France
Phone
+33 3 85 97 42 42

View All Listings by this Company
Manufacturer:
Socla SAS
Company Name
Socla SAS
Address
365, Rue du Lt Putier, 71530 Virey Le Grand, France
Phone
+33 3 85 97 42 42

View All Listings by this Company

Print This Approval


#250302713

Floguard range of in-line non-verifiable double check valve assemblies consisting of a spring loaded resilient trim single check valve cartridge housed within a DZR brass body (FLOW230002 model is nickel plated). Compression models are for use with copper pipe (manufactured to BS EN 1057). Maximum working pressure: 16.0 Bar Maximum operating temperature: 65°C

Section:
0034 Backflow Prevention Devices
Section Subtitle:
SCHEDULE 2 - Section 6.2 Type ED - Non-verifiable double check valve.
WRAS Approval Number:
250302713
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
See model.
Marking:
Reliance Worldwide Corporation ‘R’ logo, flow arrow, CR & size on body
Installation Requirements:
R001
Expiry date:
31/03/2030
Model:
FLOW230001 - 15mm compression inlet/outlet FLOW230002 – 15mm compression inlet/outlet FLOW230004 - 28mm compression inlet/outlet FLOW230005 - ½” BSP (F) inlet/outlet FLOW230006 - ¾” BSP (F) inlet/outlet FLOW230007 - 1” BSP (F) inlet/outlet FLOW230008 - 1¼” BSP (F) inlet/outlet FLOW230009 - 1½” BSP (F) inlet/outlet FLOW230010 - 2” BSP (F) inlet/outlet Model added July 2025 FLOW230003 – 22mm compression inlet/outlet

Approval Holder:
Reliance Worldwide Corporation
Company Name
Reliance Worldwide Corporation
Address
Horton Road, West Drayton
Postcode
UB7 8JL
Country
United Kingdom
Phone
+44 7730 052060
General Email
PETER.LANCASTER@RWC.COM

View All Listings by this Company

Print This Approval


#250302720

Range of in-line non-verifiable double check valve assemblies consisting of a spring loaded resilient trim single check valve cartridge housed within a DZR brass body Maximum working pressure: 16.0 Bar Maximum operating temperature: 65°C

Section:
0034 Backflow Prevention Devices
Section Subtitle:
SCHEDULE 2 - Section 6.2 Type ED - Non-verifiable double check valve.
WRAS Approval Number:
250302720
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
See model.
Marking:
Reliance Worldwide Corporation ‘R’ logo, flow arrow, CR & size on body
Installation Requirements:
R001
Expiry date:
31/03/2030
Model:
K74236 - 1¼” BSP (F) inlet/outlet K74237 - 1½” BSP (F) inlet/outlet K74238 - 2” BSP (F) inlet/outlet

Approval Holder:
Wolseley UK Ltd.
Company Name
Wolseley UK Ltd.
Address
2 Kingmaker Court, Warwick Technology Park, Warwick
Postcode
CV34 6DY
Country
United Kingdom
Phone
01926705792
General Email
martin.lister@wolseley.co.uk

View All Listings by this Company
Manufacturer:
Reliance Worldwide Corporation
Company Name
Reliance Worldwide Corporation
Address
Horton Road, West Drayton
Postcode
UB7 8JL
Country
United Kingdom
Phone
+44 7730 052060
General Email
PETER.LANCASTER@RWC.COM

View All Listings by this Company

Print This Approval


#250404708

Range of tundishes with plastic bodies. The tundish complies with the requirements of an air gap to drain. Maximum operating temperature 85°C.

Section:
0046 Backflow Prevention Devices
Section Subtitle:
Miscellaneous.
WRAS Approval Number:
250404708
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
15x22mm & 15x32mm
Marking:
Hotun RA Tech, logo and flow arrow on body.
Installation Requirements:
R001
Expiry date:
30/04/2030
Model:
HWSF-15x22 hotun (white) sf Tundish HBSF-15x22 hotun (black) sf Tundish HHWSF-15x32 hotun (white) hiflo sf HHBSF-15x32 hotun (black) hiflo sf HWNV 100C 15x22 hotun NV white HBNV 100C 15x22 hotun NV black

Approval Holder:
RA Tech UK Ltd
Company Name
RA Tech UK Ltd
Address
10 Cordelia Way Chellaston Derby
Postcode
DE73 5AR

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 894 of 1013

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.