Directory Search Results

Print List

#240204028

Range of water meter housings. The 4414-WMH-20 (threaded) model has a DZR brass body and a check valve cartridge on the inlet verified by test (suitable for backflow protection against Fluid Category 2). The 4414-WMH-1 & 4414-WMH-2 (compression) models have a brass body and an approved check valve cartridge on the inlet, however, the complete product has not been fully tested to demonstrate that it provides adequate backflow protection. The compression models are for use with copper pipe (manufactured to EN 1057). Maximum operating pressure 16.0 bar. Maximum operating temperature 85°C.

Section:
1510 Water Meter Manifolds
Size:
see model
Marking:
Eagle and flow arrow on body. The 4414-WMH-20 model is also marked CR.
Installation Requirements:
R001
Expiry date:
28/02/2029
Model:
4414-WMH-1: 15mm compression, 4414-WMH-2: 22mm compression, 4414-WMH-20: ¾” BSP (F).

Approval Holder:
SCE Technology (Ningbo) Co., Ltd
Company Name
SCE Technology (Ningbo) Co., Ltd
Address
No.32 Yuanqu Road Cha Lu Industrial Zone Ninghai Ningbo Zhejiang
Country
China

View All Listings by this Company

Print This Approval


#240204061

Range of water meter housings incorporating DZR brass bodies and a check valve cartridge however, the complete product has not been fully tested to demonstrate that it provides adequate backflow protection. Maximum operating pressure 16 bar. Maximum operating temperature 85°C

Section:
1510 Water Meter Manifolds
Size:
see model
Marking:
MWM, flow arrow CR on body.
Installation Requirements:
R001
Expiry date:
28/02/2029
Model:
WBBADAPT112-15: 15mm compression, WBBADAPT112-22: 22mm compression, WBBADAPT112-F: ¾” BSP (F).

Approval Holder:
MWM Distributors Ltd
Company Name
MWM Distributors Ltd
Address
Units 52 & 53 Enfield Industrial Estate Windsor Road
Postcode
B97 6DE
Country
Redditch
Phone
+44 (0) 1527 68200
General Email
sales@mwmdistributorltd.com

View All Listings by this Company

Print This Approval


#240204050

Range of wall & floor mounted, two hole, single outlet combination tap assemblies with brass bodies incorporating ceramic cartridge headworks with single lever operating members. Spout incorporates a plastic aerator. Products also incorporate an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. The products are supplied with shower hose and handset. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
1530 Miscellaneous Fittings
Size:
½” BSP (M).
Marking:
Gessi on handle.
Installation Requirements:
R001 R010 R030
Expiry date:
28/02/2029
Model:
65113 (wall mounted), 65128 (floor mounted) + 65099 (floor mounting plate / roughing set).

Approval Holder:
Gessi S.p.A.
Company Name
Gessi S.p.A.
Address
Parco Gessi Hamlet Vintebbio Serravalle Sesia
Postcode
13037
Country
Italy
Phone
+39 0163 454111
General Email
pfornara@gessi.it

View All Listings by this Company

Print This Approval


#240208005

Range of EEICo brass threaded fittings. Maximum working pressure 20.0 bar. Maximum operating temperature 60°C.

Section:
1530 Miscellaneous Fittings
Size:
See models.
Marking:
EEICo, size and made in KSA on body and EEICo on the nut.
Installation Requirements:
R001
Expiry date:
28/02/2029
Model:
Elbow 90⁰ ½” – 1” BSP F x F FXM Elbow ½” – 1 ¼” BSP M x F Valve tail and tail nut ½” – 1 ¼” BSP M x F Straight connector ½” – 1 ¼” BSP M x M

Approval Holder:
Elite Experts Industry Company (EEICo).
Company Name
Elite Experts Industry Company (EEICo).
Address

View All Listings by this Company
Manufacturer:
Elite Experts Industry Company (EEICo).
Company Name
Elite Experts Industry Company (EEICo).
Address

View All Listings by this Company

Print This Approval


#240202720

Range of self-acting controllers with brass bodies, EPDM O rings and gaskets. Maximum working pressure 16.0 Bar Maximum operating temperature of the secondary circuit is 65˚C and the primary circuit is 99˚C

Section:
1530 Miscellaneous Fittings
Size:
Primary ¾” BSP captive nut inlet and ¾” BSP (M) outlet, Secondary ¾” BSP (M) inlet and ¾” BSP captive nut outlet.
Marking:
Danfoss label on body, model number, production date (WW/YY), pressure rating on body.
Expiry date:
31/03/2029
Model:
PTC2+p IHPT PM2+p.

Approval Holder:
Danfoss A/S
Company Name
Danfoss A/S
Address
Nordborgvej 81 6430 Nordborg
Country
Denmark
Phone
+74 88 22 22
General Email
danfoss@danfoss.com

View All Listings by this Company
Manufacturer:
Danfoss A/S
Company Name
Danfoss A/S
Address
Nordborgvej 81 6430 Nordborg
Country
Denmark
Phone
+74 88 22 22
General Email
danfoss@danfoss.com

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 888 of 1788

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.