Directory Search Results

Print List

#2306069

‘G5 BCU60 UV’ Command centre that provides instant near boiling and chilled water (both filtered) via an electronically controlled tap (not supplied). Flow is controlled via a combinations of solenoid valves and electronic pumps to the outlets. A UV unit is incorporated on the outlet from the chilled water tank. The products are supplied with a filter cartridge. The products can also be supplied with a hot water booster and/or a venturi system to provide mains cold water combined with water from the hot water tank (see model). Maximum working pressure 5.0 bar. Maximum operating temperature 100˚C. Cold supply only.

Section:
1365 Heaters
Section Subtitle:
Electric instantaneous, open outlet, mains fed.
WRAS Approval Number:
2306069
Size:
Stainless steel braided PEX lined flexible hose assembly incorporating a ½” captive nut end connection.
Marking:
Zip and Hydrotap on front face of unit.
Installation Requirements:
R001 R007 R008 R008 R040 R0150 R170
Expiry date:
30/06/2028
Proviso:
The product listed on this approval fall under the scope of the GB Biocidal Products Regulations (GB BPR) by either incorporating or producing an active substance and/or incorporating a treated article. The product(s) has/have been judged only against the requirements of The Water Supply (Water Fittings) Regulations 1999 (England and Wales), The Water Supply (Water Fittings) (Scotland) Byelaws 2014 or The Water Supply (Water Fittings) Regulations (Northern Ireland) 2009. The decision of the Scheme to list them is not to be taken as any guide as to their effectiveness to do the job for which the active substance and/or treated article is present. WRAS accepts no liability for the material meeting the requirements of the GB Biocidal Products Regulations.
Model:
H500U2000UK: G5 BCU60 UV Command Centre UK HydroTap
Product Images

Approval Holder:
Zip Heaters UK Ltd T/A Zip Water UK
Company Name
Zip Heaters UK Ltd T/A Zip Water UK
Address
Trafalgar House, Trafalgar Business Park, Dereham
Postcode
NR19 1JG
Country
United Kingdom
Phone
0345 600 5005
General Email
sebastian.ducker@zipwater.co.uk

View All Listings by this Company
Manufacturer:
Zip Industries (Aust) Pty Ltd.
Company Name
Zip Industries (Aust) Pty Ltd.
Address
67 Allingham Street Condell Park NSW 2200
Country
Australia
General Email

View All Listings by this Company

Print This Approval


#2303054

Hydraulic block incorporating a stainless steel and copper brazed plate heat exchanger, plastic fittings and adaptors, recirculation pump and a flow adjustment valve. Maximum operating temperature: Central Heating Circuit: 90°C, Direct Hot Water Circuit: 65°C. Maximum working pressure: Central Heating Circuit: 2.5 bar, Direct Hot Water Circuit: 10 bar.

Non-metallic materials and components comply with BS6920 at 65°C

Section:
1478 Heater
Section Subtitle:
Combination boilers - accessories and components.
WRAS Approval Number:
2303054
Size:
Secondary circuit: ½” BSP (M) inlet and outlet. Primary circuit: ¾" BSP (M) Inlet and outlet.
Marking:
KD one (brand of KD Navien Co Ltd), model and made in Korea on label on body.
Installation Requirements:
R001 R008
Expiry date:
31/03/2028
Model:
NCB 700 Hydraulic blocks: 30029298 (41kW), 30029109 (52kW).
Product Images

Approval Holder:
KD Navien Co Ltd
Company Name
KD Navien Co Ltd
Address
4F Koami Bldg 22 Gukhoe daero, 76-gil Yeongdeungpo-gu Seoul, 07238
Country
Korea, Republic of

View All Listings by this Company
Manufacturer:
KD Navien Co Ltd
Company Name
KD Navien Co Ltd
Address
4F Koami Bldg 22 Gukhoe daero, 76-gil Yeongdeungpo-gu Seoul, 07238
Country
Korea, Republic of

View All Listings by this Company

Print This Approval


#2212094

Range of water meters with brass bodies, plastic turbines and EPDM washers. Inlets incorporate a plastic filter. Maximum working pressure 16.0 bar.

Non-metallic materials and components comply with BS6920 at 50°C

Section:
1505 Water Meters
Size:
DN15 – DN 40 - ¾” – 2” Male BSP, DN 50 – DN50 Flange.
Marking:
Flow arrow & size on side of body, Watertech logo, and address, Model number and pressure rating and product info on dial face.
Installation Requirements:
R001
Expiry date:
31/12/2027
Model:
BETA-SDC DN15 – ¾” BSP (M), BETA-SDC DN 20 – 1” BSP (M), BETA-SDC DN 25 – 1 ¼” BSP (M), BETA-SDC DN 32 - 1 ½” BSP (M), BETA-SDC DN 40 - 2” BSP (M), BETA-SDC DN 50.

Approval Holder:
WaterTech S.p.A
Company Name
WaterTech S.p.A
Address
Via Bartolomeo Cupin 12 Asti (AT)
Postcode
14100
Country
Italy
Phone
+39 3397920026
General Email
diegobettio@wtmeters.it

View All Listings by this Company

Print This Approval


#2212096

Range of water meters with brass bodies, plastic turbines and EPDM washers. Inlets incorporate a plastic filter. Maximum working pressure 16.0 bar.

Non-metallic materials and components comply with BS6920 at 50°C

Section:
1505 Water Meters
Size:
DN15 – DN 40 - ¾” – 2” Male BSP, DN 50 – DN50 Flange.
Marking:
GAER Brand logo and other technical info on meter face. GAER on cover. Size and flow arrow on body.
Installation Requirements:
R001
Expiry date:
31/12/2027
Model:
GMM DN15 – ¾” BSP (M), GMM DN 20 – 1” BSP (M), GMM DN 25 – 1 ¼” BSP (M), GMM DN 32 - 1 ½” BSP (M), GMM DN 40 - 2” BSP (M), GMM DN 50.

Approval Holder:
Hidroglobal Tecnologia del Agua S.A.
Company Name
Hidroglobal Tecnologia del Agua S.A.
Address
C/ GARBÍ 3 Pol.Ind. Can Volart PARETS DEL VALLÈS
Postcode
08150
Country
Spain
Phone
+34 93 573 74 00
General Email
acalderon@regaber.com

View All Listings by this Company

Print This Approval


#2304050

Range of in-line ultrasonic water meters with DZR brass bodies. The following sizes only include a plastic strainer, DN15 - DN32 sizes (incorporated), DN40 size (optional). Maximum working pressure 16.0 bar.

Non-metallic materials and components comply with BS6920 at 65°C

Section:
1505 Water Meters
Size:
DN15 = ¾” BSP (M), DN20 = 1” BSP (M), DN25 = 1¼” BSP (M), DN32 = 1½” BSP (M), DN40 = DN40 Flanged or 2” BSP (M), DN50 = DN50 Flanged or 2½” BSP (M).
Marking:
Diehl logo, Hydrus, CE, size, pressure and other technical information on casing.
Installation Requirements:
R001
Expiry date:
30/04/2028
Model:
HYDRUS 1.3 Type 171 range: DN15, with 110, 165 & 170mm length, DN20, with 110, 130, 165, 175, 190 & 220mm length, DN25, with 150, 175, & 260mm length, DN32, with 260mm length, DN40, with 200 & 300mm length (200mm not available on flanged model), DN50, with 270 & 300mm length.
Product Images

Approval Holder:
Diehl Metering GmbH & Diehl Metering Poland.
Company Name
Diehl Metering GmbH & Diehl Metering Poland.
Address
Industiestrasse 13 91522 Ansbach Germany

View All Listings by this Company
Manufacturer:
Diehl Metering GmbH & Diehl Metering Poland.
Company Name
Diehl Metering GmbH & Diehl Metering Poland.
Address
Industiestrasse 13 91522 Ansbach Germany

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 88 of 199

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.