Flexible safety hose assembly with PVC inner hose and corrugated outer cover incorporating EPDM gaskets. The inlet of the hose incorporates a plastic strainer. The hose is fitted with an integral device consisting of a water sensitive material which expands when in contact and is intended to stop the flow of water (please note that this function has not been verified by test). Maximum working pressure: 10.0 Bar. Maximum operating temperature: 60.0°C.

Section:

1860 Tubes

Section Subtitle:

Plastic hoses.

WRAS Approval Number:

240702062

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Note:

This product has not been tested or approved for anti-flooding claims made by the approval holder.

Size:

¾” BSP (F) captive nut x ¾” BSP (F) captive nut.

Marking:

TP Reflex logo, WRAS and date of manufacture (D/WW/YY) on outlet ferule. Model number, flow arrow, max pressure, max temperature and material on body of safety switch.

Installation Requirements:

R001

Expiry date:

31/07/2029

Model:

SIC800

Product Images

Approval Holder:

TP Reflex Group S.p.A

Company Name

TP Reflex Group S.p.A

Address

Via C. Battisti 91, 21040 Venegono Inferiore (VA)

Country

Italy

Phone

+390331816611

View All Listings by this Company

Range of stainless-steel braided EPDM lined flexible hose assemblies with EPDM seals, available with a variety of end connections, some of which include isolation valves (see model). Maximum working pressure 10 Bar. Maximum operating temperature 85°C

Section:

1863 Tubes

Section Subtitle:

Elastomeric.

WRAS Approval Number:

240202092

Size:

See Models

Marking:

Brymec, Size, PN, WRAS and Date of manufacture (YYYY) on ferrule.

Installation Requirements:

R001

Expiry date:

28/02/2029

Model:

DN10 30909 50cm length & 30925 30cm length - 15mm compression x 1/2"F captive nut 30911 50cm length & 30917 30cm length - 15mm compression x 3/4"F captive nut DN13 30904 50cm length & 30913 30cm length - 15mm compression x 1/2"F captive nut 30927 15mm compression x 3/4"F captive nut 30942 50cm length & 30928 30cm length - 22mm compression x 3/4"F captive nut 30903 DN19 22mm compression x 3/4"F captive nut DN10 30924 - 15mm isolating valve x 1/2"F captive nut DN13 30921- 22mm isolating valve x 3/4"F captive nut 30934 50cm length & 30926 30cm length - 15mm compression x 15mm compression DN13 30945 50cm length & 30932 30cm length- 22mm compression x 22mm compression

Approval Holder:

Brymec Ltd

Company Name

Brymec Ltd

Address

Redlands , Coulsdon, Surrey

Postcode

CR5 2HT

Country

United Kingdom

General Email

Jeremy.douglas@brymec.com

View All Listings by this Company

Range of stainless steel, stainless steel with nylon or nylon braided, EPDM lined hose assemblies. Some models incorporate servicing valves. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:

1863 Tubes

Section Subtitle:

Elastomeric.

WRAS Approval Number:

2103350

Size:

DN 6 (denoted by 06) bore diameter availble with the following end connections: 01= F1/4 02= F1/4 elbow 03= M1/4 04= F3/8 05= F3/8 knurling nut 06= F3/8 insert without nut 07= F3/8 elbow 08= M3/8 09= F1/2 10= F1/2 wing nut 11= F1/2 elbow 12= M1/2 19= M8*(12-110) with single O-ring 20= M10*(12-110) with single O-ring; 21= M11*(12-110) with single O-ring 22= M12*(12-110) with single O-ring ; 23= M14*(12-110) with single O-ring 24= M15*(12-110) with single O-ring ; 26= F15 29=10mm Compression fitting 30=12mm compression fitting 31=15mm compression fitting 32=22mm compression fitting 33=15mm isolation valve 34=22mm isolation valve 35=10mm pushfit (used with copper tube manufactured to BS2871) 36=12mm pushfit (used with copper tube manufactured to BS2871) 37=15mm pushfit (used with copper tube manufactured to BS2871) 38=22mm pushfit (used with copper tube manufactured to BS2871) 39=10mm pushfit isolation valve (used with copper tube manufactured to BS2871) 40=12mm pushfit isolation valve (used with copper tube manufactured to BS2871) 41=15mm pushfit isolation valve (used with copper tube manufactured to BS2871) 42=22mm pushfit isolation valve (used with copper tube manufactured to BS2871) 45= M8*(12‐110) with double O‐ring 46= M10*(12‐110) with double O‐ring 47= M11*(12‐110) with double O‐ring 48= M12*(12‐110) with double O‐ring 49= M14*(12‐110) with double O‐ring 50= M15*(12‐110) with double O‐ring DN8 (denoted by 08) bore diameter availble with the following end connections: 03= M1/4 04= F3/8 05= F3/8 knurling nut 06= F3/8 insert without nut 07= F3/8 elbow 08= M3/8 09= F1/2 10= F1/2 wing nut 11= F1/2 elbow 12= M1/2 13= F3/4 14= F3/4 elbow 15= M3/419= M8*(12-110) with single O-ring 19= M8*(12-110) with single O-ring 20= M10*(12-110) with single O-ring; 21= M11*(12-110) with single O-ring 22= M12*(12-110) with single O-ring ; 23= M14*(12-110) with single O-ring 24= M15*(12-110) with single O-ring ; 25= M16*(12‐110) with single O‐ring 26= F15 27=15mm smooth tube 29=10mm Compression fitting 30=12mm compression fitting 31=15mm compression fitting 32=22mm compression fitting 33=15mm isolation valve 34=22mm isolation valve 35=10mm pushfit (used with copper tube manufactured to BS2871) 36=12mm pushfit (used with copper tube manufactured to BS2871) 37=15mm pushfit (used with copper tube manufactured to BS2871) 38=22mm pushfit (used with copper tube manufactured to BS2871) 39=10mm pushfit isolation valve (used with copper tube manufactured to BS2871) 40=12mm pushfit isolation valve (used with copper tube manufactured to BS2871) 41=15mm pushfit isolation valve (used with copper tube manufactured to BS2871) 42=22mm pushfit isolation valve (used with copper tube manufactured to BS2871) 43= F1/2 plastic nut 44= F3/4 plastic nut 45= M8*(12‐110) with double O‐ring 46= M10*(12‐110) with double O‐ring 47= M11*(12‐110) with double O‐ring 48= M12*(12‐110) with double O‐ring 49= M14*(12‐110) with double O‐ring 50= M15*(12‐110) with double O‐ring 51= M16*(12‐110) with double O‐ring DN10 (denoted by 10) bore diameter availble with the following end connections: 04= F3/8 05= F3/8 knurling nut 06= F3/8 insert without nut 07= F3/8 elbow 08= M3/8 09= F1/2 10= F1/2 wing nut 11= F1/2 elbow 12= M1/2 13= F3/4 14= F3/4 elbow 15= M3/419= M8*(12-110) with single O-ring 16= F1 17=F1 elbow 18= M1 20= M10*(12-110) with single O-ring; 21= M11*(12-110) with single O-ring 22= M12*(12-110) with single O-ring ; 23= M14*(12-110) with single O-ring 24= M15*(12-110) with single O-ring ; 25= M16*(12‐110) with single O‐ring 27=15mm smooth tube 28=22mm smooth tube 30=12mm compression fitting 31=15mm compression fitting 32=22mm compression fitting 33=15mm isolation valve 34=22mm isolation valve 35=10mm pushfit (used with copper tube manufactured to BS2871) 36=12mm pushfit (used with copper tube manufactured to BS2871) 37=15mm pushfit (used with copper tube manufactured to BS2871) 38=22mm pushfit (used with copper tube manufactured to BS2871) 39=10mm pushfit isolation valve (for use with copper tube) 40=12mm pushfit isolation valve (for use with copper tube) 41=15mm pushfit isolation valve (for use with copper tube) 42=22mm pushfit isolation valve (for use with copper tube) 43= F1/2 plastic nut 44= F3/4 plastic nut 46= M10*(12‐110) with double O‐ring 47= M11*(12‐110) with double O‐ring 48= M12*(12‐110) with double O‐ring 49= M14*(12‐110) with double O‐ring 50= M15*(12‐110) with double O‐ring 51= M16*(12‐110) with double O‐ring DN13 (denoted by 13) bore diameter availble with the following end connections: 04= F3/8 07= F3/8 elbow 08= M3/8 09= F1/2 10= F1/2 wing nut 11= F1/2 elbow 12= M1/2 13= F3/4 14= F3/4 elbow 15= M3/419= M8*(12-110) with single O-ring 16= F1 17=F1 elbow 18= M1 24= M15*(12-110) with single O-ring ; 25= M16*(12‐110) with single O‐ring 27=15mm smooth tube 28=22mm smooth tube 31=15mm compression fitting 32=22mm compression fitting 33=15mm isolation valve 34=22mm isolation valve 37=15mm pushfit (for use with copper tube) 38=22mm pushfit (for use with copper tube) 41=15mm pushfit isolation valve (for use with copper tube) 42=22mm pushfit isolation valve (for use with copper tube) 43= F1/2 plastic nut 44= F3/4 plastic nut 50= M15*(12‐110) with double O‐ring 51= M16*(12‐110) with double O‐ring DN19 (denoted by 09) bore diameter availble with the following end connections 13= F3/4 14= F3/4 elbow 15= M3/419= M8*(12-110) with single O-ring 16= F1 17=F1 elbow 18= M1 28=22mm smooth tube 32=22mm compression fitting 34=22mm isolation valve 38=22mm pushfit (used with copper tube manufactured to BS2871) 42=22mm pushfit isolation valve (used with copper tube manufactured to BS2871)

Marking:

Justlink (tradename of manufacturer), WRAS and year of manufacture (YYYY) on ferrule.

Installation Requirements:

R001

Expiry date:

31/03/2026

Model:

316637 15MMXM10X30CM DN8 898868 15MMXM12X30CM DN10 122259 F3/8”X15MM X 30CM DN10 500898 F1/2”X15MM X 30CM DN10 500903 F1/2”X15MM X 50CM DN10 114103 F1/2”X15MM X 100CM DN10 695025 F3/4”X15MM X 30CM DN10 897397 F3/4”X15MM X 50CM DN10 509861 F3/4”X15MM X 100CM DN10 313144 15MM X15MM X 30CM DN10 508022 15MM X15MM X 50CM DN10 509802 15MM X15MM X100CM DN10 506150 F3/4”X22MM X 30CM DN13 507681 F3/4”X22MM X 50CM DN13 116063 F3/4”X22MM X 100CM DN13 316628 22MM X22MM X 30CM DN13 316600 22MM X22MM X 50CM DN13 699046 F1/2”X15MM ISO VALVE X 30CM DN10 307096 F1/2”X15MM ISO VALVE X 50CM DN10 306887 F3/4”X22MM ISO VALVE X 30CM DN13 897436 F3/4”X22MM ISO VALVE X 50CM DN13

Approval Holder:

The Highbourne Group, City Plumbing Supplies

Company Name

The Highbourne Group, City Plumbing Supplies

Address

Branch Support Centre Highbourne House Highbourne House Crick Northampton

Postcode

NN6 7SL

Country

United Kingdom

Phone

07342 078865

General Email

Lindsey.cocks-stevens@cityplumbing.co.uk

View All Listings by this Company

Manufacturer:

Yuhuan Jianglin Plumbing Hose & Parts Inc.

Company Name

Yuhuan Jianglin Plumbing Hose & Parts Inc.

Address

2 Jindifu Road Yuhuan Economic Development Zone Yuhuan

Postcode

317600

Country

China

Phone

86-576-89901684

General Email

coo@cnjianglin.com

View All Listings by this Company

Range of stainless steel, stainless steel with nylon or nylon braided, EPDM lined hose assemblies. Some models incorporate servicing valves. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:

1863 Tubes

Section Subtitle:

Elastomeric.

WRAS Approval Number:

2103351

Size:

DN 6 (denoted by 06) bore diameter availble with the following end connections: 01= F1/4 02= F1/4 elbow 03= M1/4 04= F3/8 05= F3/8 knurling nut 06= F3/8 insert without nut 07= F3/8 elbow 08= M3/8 09= F1/2 10= F1/2 wing nut 11= F1/2 elbow 12= M1/2 19= M8*(12-110) with single O-ring 20= M10*(12-110) with single O-ring; 21= M11*(12-110) with single O-ring 22= M12*(12-110) with single O-ring ; 23= M14*(12-110) with single O-ring 24= M15*(12-110) with single O-ring ; 26= F15 29=10mm Compression fitting 30=12mm compression fitting 31=15mm compression fitting 32=22mm compression fitting 33=15mm isolation valve 34=22mm isolation valve 35=10mm pushfit (used with copper tube manufactured to BS2871) 36=12mm pushfit (used with copper tube manufactured to BS2871) 37=15mm pushfit (used with copper tube manufactured to BS2871) 38=22mm pushfit (used with copper tube manufactured to BS2871) 39=10mm pushfit isolation valve (used with copper tube manufactured to BS2871) 40=12mm pushfit isolation valve (used with copper tube manufactured to BS2871) 41=15mm pushfit isolation valve (used with copper tube manufactured to BS2871) 42=22mm pushfit isolation valve (used with copper tube manufactured to BS2871) 45= M8*(12‐110) with double O‐ring 46= M10*(12‐110) with double O‐ring 47= M11*(12‐110) with double O‐ring 48= M12*(12‐110) with double O‐ring 49= M14*(12‐110) with double O‐ring 50= M15*(12‐110) with double O‐ring DN8 (denoted by 08) bore diameter availble with the following end connections: 03= M1/4 04= F3/8 05= F3/8 knurling nut 06= F3/8 insert without nut 07= F3/8 elbow 08= M3/8 09= F1/2 10= F1/2 wing nut 11= F1/2 elbow 12= M1/2 13= F3/4 14= F3/4 elbow 15= M3/419= M8*(12-110) with single O-ring 19= M8*(12-110) with single O-ring 20= M10*(12-110) with single O-ring; 21= M11*(12-110) with single O-ring 22= M12*(12-110) with single O-ring ; 23= M14*(12-110) with single O-ring 24= M15*(12-110) with single O-ring ; 25= M16*(12‐110) with single O‐ring 26= F15 27=15mm smooth tube 29=10mm Compression fitting 30=12mm compression fitting 31=15mm compression fitting 32=22mm compression fitting 33=15mm isolation valve 34=22mm isolation valve 35=10mm pushfit (used with copper tube manufactured to BS2871) 36=12mm pushfit (used with copper tube manufactured to BS2871) 37=15mm pushfit (used with copper tube manufactured to BS2871) 38=22mm pushfit (used with copper tube manufactured to BS2871) 39=10mm pushfit isolation valve (used with copper tube manufactured to BS2871) 40=12mm pushfit isolation valve (used with copper tube manufactured to BS2871) 41=15mm pushfit isolation valve (used with copper tube manufactured to BS2871) 42=22mm pushfit isolation valve (used with copper tube manufactured to BS2871) 43= F1/2 plastic nut 44= F3/4 plastic nut 45= M8*(12‐110) with double O‐ring 46= M10*(12‐110) with double O‐ring 47= M11*(12‐110) with double O‐ring 48= M12*(12‐110) with double O‐ring 49= M14*(12‐110) with double O‐ring 50= M15*(12‐110) with double O‐ring 51= M16*(12‐110) with double O‐ring DN10 (denoted by 10) bore diameter availble with the following end connections: 04= F3/8 05= F3/8 knurling nut 06= F3/8 insert without nut 07= F3/8 elbow 08= M3/8 09= F1/2 10= F1/2 wing nut 11= F1/2 elbow 12= M1/2 13= F3/4 14= F3/4 elbow 15= M3/419= M8*(12-110) with single O-ring 16= F1 17=F1 elbow 18= M1 20= M10*(12-110) with single O-ring; 21= M11*(12-110) with single O-ring 22= M12*(12-110) with single O-ring ; 23= M14*(12-110) with single O-ring 24= M15*(12-110) with single O-ring ; 25= M16*(12‐110) with single O‐ring 27=15mm smooth tube 28=22mm smooth tube 30=12mm compression fitting 31=15mm compression fitting 32=22mm compression fitting 33=15mm isolation valve 34=22mm isolation valve 35=10mm pushfit (used with copper tube manufactured to BS2871) 36=12mm pushfit (used with copper tube manufactured to BS2871) 37=15mm pushfit (used with copper tube manufactured to BS2871) 38=22mm pushfit (used with copper tube manufactured to BS2871) 39=10mm pushfit isolation valve (for use with copper tube) 40=12mm pushfit isolation valve (for use with copper tube) 41=15mm pushfit isolation valve (for use with copper tube) 42=22mm pushfit isolation valve (for use with copper tube) 43= F1/2 plastic nut 44= F3/4 plastic nut 46= M10*(12‐110) with double O‐ring 47= M11*(12‐110) with double O‐ring 48= M12*(12‐110) with double O‐ring 49= M14*(12‐110) with double O‐ring 50= M15*(12‐110) with double O‐ring 51= M16*(12‐110) with double O‐ring DN13 (denoted by 13) bore diameter availble with the following end connections: 04= F3/8 07= F3/8 elbow 08= M3/8 09= F1/2 10= F1/2 wing nut 11= F1/2 elbow 12= M1/2 13= F3/4 14= F3/4 elbow 15= M3/419= M8*(12-110) with single O-ring 16= F1 17=F1 elbow 18= M1 24= M15*(12-110) with single O-ring ; 25= M16*(12‐110) with single O‐ring 27=15mm smooth tube 28=22mm smooth tube 31=15mm compression fitting 32=22mm compression fitting 33=15mm isolation valve 34=22mm isolation valve 37=15mm pushfit (for use with copper tube) 38=22mm pushfit (for use with copper tube) 41=15mm pushfit isolation valve (for use with copper tube) 42=22mm pushfit isolation valve (for use with copper tube) 43= F1/2 plastic nut 44= F3/4 plastic nut 50= M15*(12‐110) with double O‐ring 51= M16*(12‐110) with double O‐ring DN19 (denoted by 09) bore diameter availble with the following end connections 13= F3/4 14= F3/4 elbow 15= M3/419= M8*(12-110) with single O-ring 16= F1 17=F1 elbow 18= M1 28=22mm smooth tube 32=22mm compression fitting 34=22mm isolation valve 38=22mm pushfit (used with copper tube manufactured to BS2871) 42=22mm pushfit isolation valve (used with copper tube manufactured to BS2871)

Marking:

Justlink (tradename of manufacturer), WRAS and year of manufacture (YYYY) on ferrule.

Installation Requirements:

R001

Expiry date:

31/03/2026

Model:

29030007 F1/2" X F1/2”X 30CM DN10 29030008 F3/4" X F3/4”X 30CM DN13 29030011 F3/8”X15MM X 30CM DN10 29030020 F1/2”X15MM X 30CM DN10 29030065 F1/2”X15MM X 50CM DN10 29030101 F1/2”X15MM X 90CM DN10 29030104 F1/2”X15MM X 100CM DN10 29030119 F3/4”X15MM X 30CM DN10 29030137 F3/4”X15MM X 50CM DN10 29030141 F3/4”X15MM X 100CM DN10 29030236 15MM X15MM X 30CM DN10 29030272 15MM X15MM X 50CM DN10 10000201 15MM X15MM X 100CM DN10 29030245 15MM X15MM X 30CM DN13 29030281 15MM X15MM X 50CM DN13 29030029 F1/2”X15MM X 30CM DN13 29030074 F1/2”X15MM X 50CM DN13 29030110 F1/2”X15MM X 100CM DN13 29030155 F3/4”X22MM X 30CM DN13 29030191 F3/4”X22MM X 50CM DN13 29030218 F3/4”X22MM X 90CM DN13 29030221 F3/4”X22MM X 100CM DN13 29030128 F3/4”X15MM X 30CM DN13 29030146 F3/4”X15MM X 50CM DN13 29030290 22MM X22MM X 30CM DN13 10000202 22MM X22MM X 50CM DN13 29030047 F1/2”X15MM ISO VALVE X 30CM DN10 29030083 F1/2”X15MM ISO VALVE X 50CM DN10 29030254 15MM X15MM ISO VALVE X 30CM DN10 29030182 F3/4”X22MM ISO VALVE X 30CM DN13 29030209 F3/4”X22MM ISO VALVE X 50CM DN13 29030400 F1/2”X15MM PUSHFIT X 30CM DN10 29030402 F1/2”X15MM PUSHFIT X 50CM DN10 29030404 F3/4”X15MM PUSHFIT X 30CM DN10 29030406 F3/4”X22MM PUSHFIT X 30CM DN13 29030408 F1/2”X15MM PUSHFIT WITH ISO VALVE X 30CM DN10 29030410 15MM PUSHFIT X15MM PUSHFIT X 30CM DN10 29030164 F3/4”X22MM X 30CM DN19 29030200 F3/4”X22MM X 50CM DN19 29030227 F3/4”X22MM X 90CM DN19 29030308 15MM X 10MMX30CM DN8 29030317 15MM X 12MMX30CM DN10

Approval Holder:

Primaflow F & P

Company Name

Primaflow F & P

Address

Votec House, Hambridge Lane, Newbury

Postcode

RG14 5TN

Country

United Kingdom

View All Listings by this Company

Manufacturer:

Yuhuan Jianglin Plumbing Hose & Parts Inc.

Company Name

Yuhuan Jianglin Plumbing Hose & Parts Inc.

Address

2 Jindifu Road Yuhuan Economic Development Zone Yuhuan

Postcode

317600

Country

China

Phone

86-576-89901684

View All Listings by this Company

Range of stainless-steel braided EPDM lined flexible hose assemblies. Compression connections are for use with copper pipe (manufactured to BS EN 1057). Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:

1863 Tubes

Section Subtitle:

Elastomeric.

WRAS Approval Number:

240502056

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

F3/8: ⅜” captive nut, F3/8 elbow: ⅜” captive nut (elbow), F1/2: ½” captive nut, F1/2 elbow: ½” captive nut (elbow), F3/4: ¾” captive nut, F3/4 elbow: ¾” captive nut (elbow), M8x1: M8x1, M10x1: M10x1, M12x1: M12x1, M3/8: ⅜” BSP (M), M1/2: ½” BSP (M), M3/4: ¾” BSP (M), T10: 10mm fitting with plain and short smooth tube with recess, 10MM: 10mm compression, 12MM: 12mm compression, 14MM: 14mm compression, 16MM: 16mm compression.

Marking:

AMG logo (‘AMG’), WRAS and year of manufacture (YYYY) on ferrule.

Installation Requirements:

R001

Expiry date:

30/04/2027

Model:

AMG-E-SS-F3/8-F3/8-DN8, AMG-E-SS-F3/8-M1/2-DN8, AMG-E-SS-F3/8-M8X1-DN8, AMG-E-SS-F3/8-M10X1-DN8, AMG-E-SS-F3/8-M12X1-DN8, AMG-E-SS-F3/8-M3/8-DN8, AMG-E-SS-F3/8-F3/8 elbow-DN8, AMG-E-SS-F1/2-F3/8-DN8, AMG-E-SS-F1/2-F1/2-DN8, AMG-E-SS-F1/2-M1/2-DN8, AMG-E-SS-F1/2-M8X1-DN8, AMG-E-SS-F1/2-M10X1-DN8, AMG-E-SS-F1/2-M12X1-DN8, AMG-E-SS-F1/2-M3/8-DN8, AMG-E-SS-F1/2-F1/2 elbow-DN8, AMG-E-SS-F3/4-F3/4-DN8, AMG-E-SS-F3/4-M1/2-DN8, AMG-E-SS-F3/4-M3/4-DN8, AMG-E-SS-F3/4-F3/4 elbow-DN8, AMG-E-SS-M1/2-F1/2 elbow-DN8, AMG-E-SS-M3/4-F3/4 elbow-DN8, AMG-E-SS-M3/8-F3/8 elbow-DN8, AMG-E-SS-F3/8-T10-DN8, AMG-E-SS-F3/8-10MM-DN8, AMG-E-SS-F3/8-12MM-DN8, AMG-E-SS-F1/2-T10-DN8, AMG-E-SS-F1/2-10MM-DN8, AMG-E-SS-F1/2-12MM-DN8, AMG-E-SS-F1/2-14MM-DN8, AMG-E-SS-F3/4-16MM-DN12, AMG-E-SS-M1/2-10MM-DN8, AMG-E-SS-M1/2-12MM-DN8, AMG-E-SS-M1/2-14MM-DN8, AMG-E-SS-M3/8-10MM-DN8, AMG-E-SS-M3/8-12MM-DN8, AMG-E-SS-F3/4-F3/4-DN10, AMG-E-SS-F1/2-F1/2-DN10, AMG-E-SS-F1/2-M1/2-DN10, AMG-E-SS-F3/8-M10X1-DN10, AMG-E-SS-F3/8-M12X1-DN10, AMG-E-SS-F1/2-F1/2 elbow-DN10, AMG-E-SS-F3/4-M1/2-DN10, AMG-E-SS-F3/4-M3/4-DN10, AMG-E-SS-F3/4-F3/4 elbow-DN10, AMG-E-SS-F1/2-M10X1-DN10, AMG-E-SS-F1/2-M12X1-DN10, AMG-E-SS-M1/2-F1/2 elbow-DN10, AMG-E-SS-M3/4-F3/4 elbow-DN10, AMG-E-SS-F3/4-F3/4-DN12, AMG-E-SS-F1/2-F1/2-DN12, AMG-E-SS-F3/4-M3/4-DN12, AMG-E-SS-F3/4-F3/4 elbow-DN12, AMG-E-SS-M1/2-F1/2 elbow-DN12, AMG-E-SS-M3/4-F3/4 elbow-DN12, AMG-E-SS-F3/4-M1/2-DN12, AMG-E-SS-F1/2-F1/2 elbow-DN12.

Product Images

Approval Holder:

Yuhuan AMG Just Valve Co., Ltd

Company Name

Yuhuan AMG Just Valve Co., Ltd

Address

M&E Industrial Zone, Yuhuan, Zhejiang

Country

China

Phone

86 576 87281908

General Email

trading@amg.com.cn

View All Listings by this Company

Manufacturer:

Yuhuan AMG Just Valve Co., Ltd

Company Name

Yuhuan AMG Just Valve Co., Ltd

Address

M&E Industrial Zone, Yuhuan, Zhejiang

Country

China

Phone

86 576 87281908

General Email

trading@amg.com.cn

View All Listings by this Company

Range of primary hot water buffer tanks consisting of stainless steel shells. Maximum working pressure 8.0 bar. Maximum operating temperature 80°C.

Section:

1890 Unvented Heating Apparatus

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See models

Marking:

Adhesive label on body stating Lapesa (Manufacturer) Address, Model No, Year of manufacture, Capacity, Pressure rating, Serial number and other tech info.

Installation Requirements:

R001

Expiry date:

30/06/2029

Model:

MXM-RB-3000-PSS [3" male BSP inlet and outlet] MXM-RB-3000-PSS2 [2" male BSP inlet and outlet] MXM-RB-3000 [2" male BSP inlet and outlet] MXM-RB-2500-PSS [3" male BSP inlet and outlet] MXM-RB-2500-PSS2 [2" male BSP inlet and outlet] MXM-RB-2500 [2" male BSP inlet and outlet] MXM-RB-2000-PSS [3" male BSP inlet and outlet] MXM-RB-2000-PSS2 [2" male BSP inlet and outlet] MXM-RB-2000 [2" male BSP inlet and outlet] MXM-RB-1500-PSS [3" male BSP inlet and outlet] MXM-RB-1500-PSS2 [2" male BSP inlet and outlet] MXM-RB-1500 [2" male BSP inlet and outlet]

Approval Holder:

Mitsubishi Heavy Industries Air conditioning Europe

Company Name

Mitsubishi Heavy Industries Air conditioning Europe

Address

5 The Square Hayes Uxbridge Middlesex

Postcode

UB11 1ET

Country

United Kingdom

Phone

+44(0)75 8663 8352

General Email

mohamed.abdihakim.hp@mhi.com

View All Listings by this Company

Manufacturer:

Lapesa Grupo Empresarial S. L.

Company Name

Lapesa Grupo Empresarial S. L.

Address

Polígono Industrial Malpica, C/A, Parcela 1A, 50016 Zaragoza

Country

Spain

General Email

View All Listings by this Company

Range of primary hot water buffer tanks consisting of insulated enamel and Stainless steel shells. Maximum working pressure 8.0 bar. Maximum operating temperature 80°C.

Section:

1890 Unvented Heating Apparatus

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See models

Marking:

Adhesive label on body stating Lapesa (Manufacturer) Adress, Model No, serial No, Year of manufacture, Capacity, actual capacity max pressure and other tech info

Installation Requirements:

R001

Expiry date:

30/06/2029

Model:

CVM-RB-1000/PSS [3" male BSP inlet and outlet]. CVM-RB-1000/PSS2 [2" male BSP inlet and outlet]. CVM-RB-1000 [2" male BSP inlet and outlet]. CVM-RB-750/PSS [3" male BSP inlet and outlet]. CVM-RB-750/PSS2 [2" male BSP inlet and outlet]. CVM-RB-750 [2" male BSP inlet and outlet]. CVM-R-750/PSS [3" male BSP inlet and outlet]. CVM-R-750/PSS2 [2" male BSP inlet and outlet]. CVM-R-750 [2" male BSP inlet and outlet]. CVM-R-500/PSS [3" male BSP inlet and outlet]. CVM-R-500/PSS2 [2" male BSP inlet and outlet]. CVM-R-500 [2" male BSP inlet and outlet].

Approval Holder:

Mitsubishi Heavy Industries Air conditioning Europe

Company Name

Mitsubishi Heavy Industries Air conditioning Europe

Address

5 The Square Hayes Uxbridge Middlesex

Postcode

UB11 1ET

Country

United Kingdom

Phone

+44(0)75 8663 8352

General Email

mohamed.abdihakim.hp@mhi.com

View All Listings by this Company

Manufacturer:

Lapesa Grupo Empresarial S. L.

Company Name

Lapesa Grupo Empresarial S. L.

Address

Polígono Industrial Malpica, C/A, Parcela 1A, 50016 Zaragoza

Country

Spain

General Email

View All Listings by this Company

Range of air release valves with blue epoxy coated ductile iron bodies and EPDM seats. Maximum working pressure 16.0 bar

Non-metallic materials and components comply with BS6920 at 80°C

Section:

1980 Valves

Section Subtitle:

Air venting. Fittings in this section are suitable for above ground installations only.

WRAS Approval Number:

2301096

Size:

DN50, DN80, DN100, DN150, DN200, DN300 flanged.

Marking:

AFC) Suzhou Alpine Flow Control Co., Ltd Logo, DN, PN and other technical Info on body.

Installation Requirements:

R001 R120

Expiry date:

31/01/2028

Model:

KARX series

Approval Holder:

AFC Valves Malaysia SDN BHD

Company Name

AFC Valves Malaysia SDN BHD

Address

26 Jalan Sungai Jeluh

Postcode

shah Alam

View All Listings by this Company

Range of wall mounted thermostatic shower valves, (chrome plated brass bodies), incorporating a quarter turn ceramic disc headworks with a single lever operating member. The temperature is controlled independently via a thermostatic cartridge with a single lever operating member. Model (1.1660.007) incorporates an overhead shower and riser rail assembly. Model (1.1660.015) incorporates a shower hose, handset, overhead shower, riser rail assembly and a shower to shower diverter. Maximum operating pressure 5 bar. Maximum operating temperature 65°C

Section:

2010 Shower Valves

Section Subtitle:

Shower valve(s) with thermostatic temperature control

WRAS Approval Number:

240604009

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

15mm compression

Marking:

Mira on valve body.

Installation Requirements:

R001 R010 R040

Expiry date:

30/06/2029

Model:

I.I660.007, I.I660.0I5.

Product Images

Approval Holder:

Kohler Mira Ltd.

Company Name

Kohler Mira Ltd.

Address

Cromwell Road Cheltenham Gloucestershire

Postcode

GL52 5EP

Country

United Kingdom

Phone

07425 645619

General Email

jon.barfield@mirashowers.com

View All Listings by this Company

Manufacturer:

Kohler Mira Ltd.

Company Name

Kohler Mira Ltd.

Address

Cromwell Road Cheltenham Gloucestershire

Postcode

GL52 5EP

Country

United Kingdom

Phone

07425 645619

General Email

jon.barfield@mirashowers.com

View All Listings by this Company

Range of T-type thermostatic mixing valves with DZR brass bodies. Temperature is pre-set under a fixed cap. The inlet adaptors incorporate single check valve cartridges (verified by test, suitable for backflow protection against Fluid Category 2) and stainless-steel strainers. Maximum working pressure 10.0 Bar. Maximum operating temperature 85.0°C.

Section:

2010 Shower Valves

Section Subtitle:

Shower valve(s) with thermostatic temperature control

WRAS Approval Number:

240602060

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

15mm or 22mm compression (see models) for use with copper pipe (EN1057) only.

Marking:

DVS on cap IMIX, CR and size on body.

Installation Requirements:

R001 R040

Expiry date:

30/06/2029

Model:

15mm Compression Models: AC17-047 22mm Compression Models: AC17-048

Approval Holder:

KWC DVS Ltd.

Company Name

KWC DVS Ltd.

Address

Kemmings Close, Long Road, Paignton, Devon

Postcode

TQ4 7TW

Country

United Kingdom

Phone

01246 458 900

General Email

richard.lamb@kwc.com

View All Listings by this Company