Water Regulations Approval Scheme Ltd

Directory Search Results

WRAS Approval Number: #241004718

‘AMV-FB’ and ‘AMV-FE’ range of two, three and four pump cold water booster sets. The products incorporate a suction and discharge manifold, vertical multistage pumps, expansion vessel, isolation valves, pressure sensor and flow regulator. Maximum working pressure 10.0 bar. Cold water use only.

Section:: 1610 Pumps
Section Subtitle:: Wholesome water use.
WRAS Approval Number:: 241004718
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: see model
Marking:: Aquatech Pressmain & AGM on control panel.
Installation Requirements:: R001 R415
Expiry date:: 31/10/2029
Model:: AMV2-FB-2-Z DN50 Inlet & outlet connections AMV2-FB-4-Z DN50 Inlet & outlet connections AMV2-FB-6-Z DN50 Inlet & outlet connections AMV2-FB-12-Z DN80 Inlet & outlet connections AMV2-FB-18-Z DN80 Inlet & outlet connections AMV2-FB-24-Z DN80 Inlet & outlet connections AMV3-FB-2-Z DN50 Inlet & outlet connections AMV3-FB-4-Z DN50 Inlet & outlet connections AMV3-FB-6-Z DN50 Inlet & outlet connections AMV3-FB-12-Z DN80 Inlet & outlet connections AMV3-FB-18-Z DN80 Inlet & outlet connections AMV3-FB-24-Z DN80 Inlet & outlet connections AMV4-FB-2-Z DN65 Inlet & outlet connections AMV4-FB-4-Z DN65 Inlet & outlet connections AMV4-FB-6-Z DN65 Inlet & outlet connections AMV4-FB-12-Z DN100 Inlet & outlet connections AMV4-FB-18-Z DN100 Inlet & outlet connections AMV4-FB-24-Z DN100 Inlet & outlet connections AMV2-FE-2-Z DN50 Inlet & outlet connections AMV2-FE-4-Z DN50 Inlet & outlet connections AMV2-FE-6-Z DN50 Inlet & outlet connections AMV2-FE-12-Z DN80 Inlet & outlet connections AMV2-FE-18-Z DN80 Inlet & outlet connections AMV2-FE-24-Z DN80 Inlet & outlet connections AMV3-FE-2-Z DN50 Inlet & outlet connections AMV3-FE-4-Z DN50 Inlet & outlet connections AMV3-FE-6-Z DN50 Inlet & outlet connections AMV3-FE-12-Z DN80 Inlet & outlet connections AMV3-FE-18-Z DN80 Inlet & outlet connections AMV3-FE-24-Z DN80 Inlet & outlet connections AMV4-FE-2-Z DN65 Inlet & outlet connections AMV4-FE-4-Z DN65 Inlet & outlet connections AMV4-FE-6-Z DN65 Inlet & outlet connections AMV4-FE-12-Z DN100 Inlet & outlet connections AMV4-FE-18-Z DN100 Inlet & outlet connections AMV4-FE-24-Z DN100 Inlet & outlet connections

Approval Holder:: Dutypoint Ltd.

Company Name
Dutypoint Ltd.
Address
Unit A, Quedgeley West Business Park, Hardwicke, Gloucester
Postcode
GL2 4PA
Country
United Kingdom
Phone
01452313334
General Email
austin.hill@dutypoint.com

View All Listings by this Company

WRAS Approval Number: #241004726

Range of horizontal multistage close coupled centrifugal pumps incorporating stainless steel cased bodies and impellers. Maximum working pressure: See models. Cold water use only.

Section:: 1610 Pumps
Section Subtitle:: Wholesome water use.
WRAS Approval Number:: 241004726
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: 1” BSP (F) - 3” BSP (F). DN40 - DN80 flange.
Marking:: Calpeda and technical info on data plate.
Installation Requirements:: R001 R415
Expiry date:: 31/10/2029
Model:: MXH Series: (304 stainless models) MXH/MXHM 202, 203, 204, 205, 206 – 1 ¼” x 1” – 8 bar. MXH/MXHM 402, 403, 404, 405, 406 – 1 1/2” x 1” – 8 bar. MXH/MXHM 802, 803, 804, 805 – 2 ¼” x 1 1/2” – 8 bar. MXH/MXHM 1602, 1603, 1604, 1605, 1606 – 2 ¼” x 1 1/2” – 8 bar. MXH/MXH-F 2001, 2002, 2003, 2004, 2005 – 2 ¼” x 1 1/2” – 10 bar. MXH/MXH-F 3201, 3202, 3203, 3204 – 2 1/2” x 2” – 10 bar. MXH/MXH-F 4801, 4802, 4803 – 3” x 2 1/2” – 10 bar. (316 stainless models) MXHL/MXHLM 202, 203, 204, 205, 206 - 1 ¼” x 1” – 8 bar. MXHL/MXHLM 402, 403, 404, 405, 406 - 1 ¼” x 1” – 8 bar. MXHL/MXHLM 802, 803, 804, 805 - 1 1/2” x 1” – 8 bar. Models Added March 2026: (304 stainless models) MXH 207, 208, 209, 407, 408, 409, 806, 807,808 – 1 ¼” x 1” – 10 bar. MXHM 207, 208, 209, 407, 408 – 1 ¼” x 1” – 10 bar. (316 stainless models) MXHL 207, 208, 209, 407, 408, 409, 806, 807,808 – 1 ¼” x 1” – 10 bar. MXHLM 207, 208, 209, 407, 408 – 1 ¼” x 1” – 10 bar. ‘F’ in the code indictates flanged connection. There are four numbers to identify pump’s size: the first two indicate the flow rate (in m3/h); the second two indicate the number of stage (ex. Mxh 3204: 32 m3/h, 4 stages; mxh 203: 2 m3/h, 3 stages) A letter may be added at the end of the pump model to identify the current motor model fitted to the pump e.g. MXH203* where * can be E, /A, /B, /C etc. Example MXH203/A, MXH204/B etc.

Approval Holder:: Calpeda S.p.A

Company Name
Calpeda S.p.A
Address
Via Roggia Di Mezzo 39 36050 Montoro Vicentino Vicenza
Country
Italy

View All Listings by this Company

WRAS Approval Number: #241002708

Range of horizontal multistage pumps with stainless steel bodies, diffuser and impellers and EPDM ‘O’-rings. The products incorporate a graphite-SiC-EPDM shaft seal. The products incorporate a drain plug. Maximum working pressure 8.5 bar. 9Maximum operating temperature 80°C.

Section:: 1610 Pumps
Section Subtitle:: Wholesome water use.
WRAS Approval Number:: 241002708
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Note:: The discharge from the drain plug must be via a type `AA`, `AB` or `AD` airgap, or in accordance with EN1717.
Size:: U 3S & U 5S models: 1” BSP (F) inlet x 1” BSP (F) outlet. U 7S models: 1¼” BSP (F) inlet x 1” BSP (F) outlet. U 9S models: 1½” BSP (F) inlet x 1¼” BSP (F) outlet. U 18S models: 2” BSP (F) inlet x 1½” BSP (F) outlet.
Marking:: Pentax logo, model code and other technical information on data plate on body.
Installation Requirements:: R001 R415
Expiry date:: 31/10/2029
Model:: ULTRA S range: U X(S) - XX/Y (T) Where: U = pump type (ULTRA), X = Nominal flow-rate m³/h (3, 5, 7, 9, 18 see model list), S = ULTRA S range - stainless steel hydraulic part, XX = nominal power HPx100 (50 - 400 see model list), Y = Number of impellers (2 - 7 see model list), T = 3 phase, [blank] = single phase. U 3S models: U 3S-50/2; U 3S-70/3; U 3S-90/4; U 3S-100/5; U 3S-120/6; U 3S-150/7. U 5S models: U 5S-70/2; U 5S-80/3; U 5S-120/4; U 5S-150/5; U 5S-180/6; U 5S-200/7. U 7S models: U 7S-100/2; U 7S-120/3; U 7S-180/4; U 7S-250/5; U 7S-300/6. U 9S models: U 9S-100/2; U 9S-150/3; U 9S-200/4; U 9S-250/5. U 3S models: U 3S-50/2 T; U 3S-70/3 T; U 3S-90/4 T; U 3S-100/5 T; U 3S-120/6 T; U 3S-150/7 T. U 5S models: U 5S-70/2 T; U 5S-80/3 T; U 5S-120/4 T; U 5S-150/5 T; U 5S-180/6 T; U 5S-200/7 T. U 7S models: U 7S-100/2 T; U 7S-120/3 T; U 7S-180/4 T; U 7S-250/5 T; U 7S-300/6 T; U 7S-350/7 T. U 9S models: U 9S-100/2 T; U 9S-150/3 T; U 9S-200/4 T; U 9S-250/5 T. U 18S models: U 18S-180/2 T; U 18S-250/3 T; U 18S-400/4 T.

Approval Holder:: PENTAX INDUSTRIES SpA

Company Name
PENTAX INDUSTRIES SpA
Address
Viale dell’Industria 1 Veronella
Postcode
37040
Country
Italy
Phone
+39 0442 489567
General Email
g.cengia@pentax-pumps.it

View All Listings by this Company

WRAS Approval Number: #241002709

Range of vertical (CVM) or horizontal (CHM) multistage pumps with stainless-steel bodies and stainless-steel impellers, intermediate chambers, shaft and outer sleeve and EPDM seals. Maximum working pressure: 25 Bar. Maximum working temperature: 23°C.

Section:: 1610 Pumps
Section Subtitle:: Wholesome water use.
WRAS Approval Number:: 241002709
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: See models below.
Marking:: Groundfos Logo, D.O.M (YYYY.MM.DD), series number, max temp, max pressure and other information on data plate on body. Flow arrow on body
Installation Requirements:: R001 R415
Expiry date:: 31/10/2029
Model:: CV(H)M 4: 2 to 12 stages: Suction flange – DN50, Discharge flange – DN20. CV(H)M 5: 2 to 12 stages: Suction flange – DN50, Discharge flange – DN40. CV(H)M 6: 2 to 11 stages: Suction flange – DN65, Discharge flange – DN40. CV(H)M 10: 2 to 10 stages: Suction flange – DN100, Discharge flange – DN80.

Approval Holder:: Grundfos Holding A/S

Company Name
Grundfos Holding A/S
Address
Poul Due Jensens Vej 7 Bjerringbro
Postcode
DK-8850
Country
Denmark
Phone
+36302482216
General Email
oszilagyi@grundfos.com

View All Listings by this Company

WRAS Approval Number: #241002018

Range of shower handsets with plastic bodies (various finishes), handset holder, riser rail and TPE inner lined multilayered shower hose. The handset incorporates a flow restrictor at the inlet. Open Outlet. Maximum operating temperature: 60.0°C.

Section:: 1650 Shower Outlets
Section Subtitle:: Shower head(s) and/or shower handset(s).
WRAS Approval Number:: 241002018
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: ½” BSP (M).
Marking:: Villeroy & Boch Logo on body.
Installation Requirements:: R001 R040
Expiry date:: 31/10/2029
Model:: TVS109004UK0XX - Universal, TVS109007UK0XX - Verve. XX at the end indicates the Finish of surfaces that are not in contact with water (61 - Chrome, K5 - Matt black, 76 - Brushed gold, 64 - Brushed nickel).

Approval Holder:: Villeroy & Boch AG

Company Name
Villeroy & Boch AG
Address
Saaruferstraße 1-3 Mettlach
Postcode
66693
Country
Germany
Phone
+49 151 16775778
General Email
Finkler.Marc@villeroy-boch.com

View All Listings by this Company