'Rhenolub® MK I-RB FDA'. Factory applied, clear epoxy coating. Apply as per manufacturer's instructions 'version 1' dated 28.10.2022. Cure for 30 minutes@140°C. For use with water up to 85°C. This material is only approved for the curing conditions that appear on the approval. If the cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:

5030 Coatings, Paints & Linings

Section Subtitle:

Factory applied pipe & fittings coatings.

WRAS Approval Number:

2209539

Expiry date:

30/09/2027

Approval Holder:

Rhenotherm Mini Parts GmbH

Company Name

Rhenotherm Mini Parts GmbH

Address

Peter-Jakub-Busch-Str. 6, 47906 Kempen, Germany

View All Listings by this Company

'UPS 505 WAU Blue & Grey'. Site applied, two-component polyurethane coatings which are available in blue or grey colours (once mixed). Mix Part A (blue or grey opaque liquid) with Part B (amber, translucent liquid) in a 100:30.5 weight ratio and apply as per manufacturer's technical data sheet ‘TDS – UPS505WAU - Version 6 – August 2022'. Cure for 14 days@7°C. For use with water up to 23°C. This material is only approved for the mixing and curing conditions that appear on the approval. If the mixing and/or curing conditions are varied from those specified on the approval then the materials are not covered by the scope of the approval.

Section:

5042 Coatings, Paints & Linings

Section Subtitle:

Site applied pipe and fittings coatings. Compliance with BS6920 relates to the conditions of cure specified in the listing. If the cure conditions are varied from those described below then compliance with BS6920 cannot be assummed without further testing. Where catalysts are required, only tested catalysts in the recommended concentrations should be used. Manufacturer's advice must be sought if any non standard mixing or curing conditions are being considered.

WRAS Approval Number:

2205567

Expiry date:

31/05/2027

Approval Holder:

Unique Polymer Systems Ltd.

Company Name

Unique Polymer Systems Ltd.

Address

Unit 19, Link Business Centre, Worcs.

Postcode

WR14 1UQ

View All Listings by this Company

`KA Tanking Slurry`. Site applied, grey coloured tanking slurry. Mix tanking slurry with water in a 3:1 volume ratio and apply coat 1 as per manufacturer's IFU 'AFSOL001', dated '05/04/2022'. Cure for 24 hours@7°C. Mix tanking slurry with water in a 3:1 volume ratio and apply coat 2, 24 hours after the first coat, as per manufacturer's IFU 'AFSOL001', dated '05/04/2022'. Cure for 14 days@7°C. For use with water up to 23°C. This material is only approved for the mixing & curing conditions that appear on the approval. If the mix and/or cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:

5055 Concrete, Cement and Mortar

Section Subtitle:

Waterproofers.

WRAS Approval Number:

2208585

Expiry date:

31/08/2027

Approval Holder:

Kenyon Agencies Limited

Company Name

Kenyon Agencies Limited

Address

Fir Tree Cottage, Wheal Rose, Redruth, Cornwall

Postcode

TR16 5DF

Phone

+44 1209 891 744

View All Listings by this Company

'Icorene 1314 BLK 9001'. Black coloured LLDPE material manufactured by rotomoulding. For use with water up to 85°C.

Section:

5245 Polyethylene

Section Subtitle:

Material only. Components made from materials listed in this section may be required to be submitted for audit tests.

WRAS Approval Number:

2208595

Expiry date:

31/08/2027

Approval Holder:

A. Schulman Gainsborough Ltd.

Company Name

A. Schulman Gainsborough Ltd.

Address

Sandars Road, Heapham Road Industrial Estate, Gainsborough Lincs.

Phone

+44 1427 676767

View All Listings by this Company

'ABR-PS'. Black coloured, injection moulded polystyrene material. Between July 2022 and 14th February 2023, the material is for use with water up to 23°C. From 15th February 2023 until July 2027, the material is for use with water up to 60°C.

Section:

5270 Polystyrene

Section Subtitle:

Material only. Components made from materials listed in this section may be required to be submitted for audit tests.

WRAS Approval Number:

2207524

Expiry date:

31/07/2027

Approval Holder:

Hangzhou Keyang New Material Co., Ltd.

Company Name

Hangzhou Keyang New Material Co., Ltd.

Address

Xianshi Village, Liangzhu, Yuhang District, Hangzhou

Country

China

View All Listings by this Company