'USW-95-A Black'. Black coloured, injection moulded TPU material. For use with water up to 23°C.

Section:

5297 Polyurethane

Section Subtitle:

Material only. Components made from materials listed in this section may be required to be submitted for audit tests.

WRAS Approval Number:

2007531

Expiry date:

31/07/2025

Approval Holder:

AVK GUMMI A/S

Company Name

AVK GUMMI A/S

Address

Mosegaardsvej 1, DK 8670 Laasby

Country

Denmark

Phone

+45 8695 1311

General Email

avkgummi.dk

View All Listings by this Company

`Superfast Copper`. Site applied, copper coloured epoxy putty. The putty should be kneaded together, its supplied in a pre-measured 1:1 mass ratio and applied as per manufacturer's directions for use dated August 9th, 2021. Cure for 24 hours@22°C. For use with water up to 23°C. This material is only approved for the curing conditions that appear on the approval. If the cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:

5308 Repair Material

Expiry date:

28/02/2026

Approval Holder:

Sylmasta Ltd.

Company Name

Sylmasta Ltd.

Address

Halland House, Dales Yard, Lewes Road, Scaynes Hill, West Sussex

Postcode

RH17 7PG

View All Listings by this Company

‘EPDM-FF’. Black coloured, compression moulded EPDM rubber material. Shore hardness 80A. Tested in-radius size 0.89mm. For use with water up to 85°C.

Section:

5365 Rubbers

Section Subtitle:

Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.

WRAS Approval Number:

2012525

Expiry date:

31/12/2025

Approval Holder:

Alfa Laval Lund AB

Company Name

Alfa Laval Lund AB

Address

PO Box 74, SE-22100, Lund

Country

Sweden

View All Listings by this Company

‘ELASTOSIL® R plus 4303/60 mH (60), ELASTOSIL® R plus 4303/70 mH (70) and ELASTOSIL® R plus 4303/80 mH (80)’. Extruded, natural (appears white in colour) platinum cured HTV silicone rubber with a shore hardness of between 60 & 80. Tested in-radius size 2.0mm. The rubbers may also be coloured using the following ELASTOSIL® Color Pastes PT in a maximum of 1% content: PT Carbon black RAL 9005. PT Red brown RAL 3013. PT Red RAL 3000 F. PT Yellow RAL1016 PT Yellow RAL 1026 F PT Yellow RAL 1021. PT Grey RAL 7040. PT Dark blue 5010. PT Ultramarine blue RAL 5002. PT Violet RAL 4001. PT Green RAL 6017. PT Black RAL 9017. PT White RAL 9010. PT Yellow RAL 1033. PT Orange RAL 2004 F. PT Violet RAL 4002. PT Blue RAL 5022. PT Helio green RAL 6004. For use with water up to 85°C.

Section:

5415 Rubbers

Section Subtitle:

Silicone - material only. Components made from materials listed in this section may be required to be submitted for audit tests.

WRAS Approval Number:

2011539

Expiry date:

30/11/2025

Approval Holder:

Wacker Chemie AG

Company Name

Wacker Chemie AG

Address

Johannes-Heb-Strasse 24, D-84489, Burghausen

Country

Germany

Phone

Tel: +49 8677 835947 Fax: +49 8677 834142

View All Listings by this Company

'SI-30T, SI-40T, SI-50T, SI-60T, SI-70T, SI-80T & SI-90T (transparent, unpigmented)'. 'SI-30R, SI-40R, SI-50R, SI-60R, SI-70R, SI-80R & SI-90R (red coloured)'. 'SI-30B, SI-40B, SI-50B, SI-60B, SI-70B, SI-80B & SI-90B (blue coloured)'. Range of compression moulded, silicone rubber materials. Shore hardness between 30 & 90. Tested in-radius size 0.9mm. For use with water up to 85°C.

Section:

5415 Rubbers

Section Subtitle:

Silicone - material only. Components made from materials listed in this section may be required to be submitted for audit tests.

WRAS Approval Number:

2008539

Expiry date:

31/08/2025

Approval Holder:

Hun-Yi Rubber Industrial Co., Ltd.

Company Name

Hun-Yi Rubber Industrial Co., Ltd.

Address

No. 40, Lane 193, Hochen Road, Homei Town, Changhua County

Country

Taiwan,

Phone

+(886)47551315

General Email

hunyirubber@yahoo.com.tw

View All Listings by this Company