Range of shower hoses and riser rail with chromium plated brass bodies, incorporating EPDM ‘O’-rings. Maximum operating temperature 85°C.

Section:

1530 Miscellaneous Fittings

WRAS Approval Number:

2009048

Note:

Open outlet use only.

Size:

½” x ½” BSP (F)

Marking:

Dornbracht on riser rail. Dornbracht on ferrule.

Installation Requirements:

R001 R040

Expiry date:

30/09/2025

Model:

28104970 Metal shower hose 1/2" x 1/2" x 1250 mm 28204970 Metal shower hose 1/2" x 1/2" x 1750 mm 26413360 Shower set 26413370 Shower set 28322970 Metal shower hose 1/2" x 3/8" x 1750 mm 28304970 Metal shower hose 1/2" x 3/8" x 1500 mm 093002072 Metal shower hose 1/2" x 3/8" x 1250 mm 26413625 Shower set 26413710 Shower set 26413809 Shower set 26413892 Shower set 26413979 Shower set 26413980 Shower set

Product Images

Approval Holder:

Dornbracht GmbH & Co. KG.

Company Name

Dornbracht GmbH & Co. KG.

Address

Koebbingser Muehle 6 Iserlohn

Postcode

D-58640

Country

Germany

Phone

+49 2371 433 0

General Email

wpape@dornbracht.com

View All Listings by this Company

Manufacturer:

Dornbracht GmbH & Co. KG.

Company Name

Dornbracht GmbH & Co. KG.

Address

Koebbingser Muehle 6 Iserlohn

Postcode

D-58640

Country

Germany

Phone

+49 2371 433 0

General Email

wpape@dornbracht.com

View All Listings by this Company

Shower hose and handset with sliding rail and inlet kit. The inlet incorporates an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum operating temperature 60°C.

Section:

1530 Miscellaneous Fittings

WRAS Approval Number:

2009327

Note:

Open outlet use only.

Size:

½” BSP (M)

Marking:

Gessi logo on handle on hand rail.

Installation Requirements:

R001 R040

Expiry date:

30/09/2025

Model:

47306

Product Images

Approval Holder:

Gessi S.p.A.

Company Name

Gessi S.p.A.

Address

Parco Gessi Hamlet Vintebbio Serravalle Sesia

Postcode

13037

Country

Italy

Phone

+39 0163 454111

General Email

pfornara@gessi.it

View All Listings by this Company

Manufacturer:

Gessi S.p.A.

Company Name

Gessi S.p.A.

Address

Parco Gessi Hamlet Vintebbio Serravalle Sesia

Postcode

13037

Country

Italy

Phone

+39 0163 454111

General Email

pfornara@gessi.it

View All Listings by this Company

Range of plastic manifold systems designed to accept interchanagble sensors (not supplied). Maximum working pressure 6.0 bar. Cold water use only.

Section:

1530 Miscellaneous Fittings

Size:

8mm pushfit.

Marking:

ATI (Analytical Technology Inc logo) on body.

Installation Requirements:

R001 R120

Expiry date:

30/09/2025

Model:

ATI ‘Metrinet’ range: 2 flow cell. Quad flow cell.

Approval Holder:

Analytical Technology

Company Name

Analytical Technology

Postcode

OL3 5DE

View All Listings by this Company

Manufacturer:

Analytical Technology

Company Name

Analytical Technology

Postcode

OL3 5DE

View All Listings by this Company

Range of in-line plastic flow regulators. The flow regulator is housed within a black plastic body incorporating a plastic strainer and an EPDM ‘O’-ring. Maximum working pressure 10.0 bar. Maximum operating temperature 90°C.

Section:

1530 Miscellaneous Fittings

Size:

¾” BSP (M)

Marking:

Flow arrow, flow rate, HL2024 (brand of HGP), connection size and connection type on adhesive label on body. Flow arrow on body.

Installation Requirements:

R001

Expiry date:

30/09/2025

Model:

HL2024 Inline Cartridge 3P 3-4 EC EP. HL2024 Control Flow 3P 3-4 EC EP. HL2024 Inline Cartridge 3P 3-4 FL EP. HL2024 Control Flow 3P 3-4 FL EP. Where: EC = BSPP ¾” Euroconus. FL = BSPP ¾” Flat Faced.

Product Images

Approval Holder:

HaGePe International B.V (HGP International)

Company Name

HaGePe International B.V (HGP International)

Address

Huizermaatweg 27-2 1273 NA Huizen

Country

Netherlands

View All Listings by this Company

Manufacturer:

HaGePe International B.V (HGP International)

Company Name

HaGePe International B.V (HGP International)

Address

Huizermaatweg 27-2 1273 NA Huizen

Country

Netherlands

View All Listings by this Company

Range of vertical multistage booster pumps, with stainless steel bodies and impellors (AISI304 or 316 see model). Maximum working pressure (model dependent): 4.0 bar models: BMVET(I) 32-10-1 to BMVET(I) 32-40. BMVET(I) 42-10-1 to BMVET(I) 42-20. BMVET(I) 65-10-1 to BMVET(I) 65-20-2. BMVET(I) 85-10-1 to BMVET(I) 85-10. 10.0 bar models: BMVET(I) 1-2 to BMVET(I)1-36. BMVET(I) 2-2 to BMVET(I) 2-11. BMVET(I) 3-2 to BMVET(I) 3-29. BMVET(I) 4-2 to BMVET(I) 4-10. BMVET(I) 8-2 to BMVET(I) 8-20. BMVET(I) 12-2 to BMVET(I) 12-18. BMVET(I) 16-2 t BMVET(I) 16-16. BMVET(I) 20-1 to BMVET(I) 20-17. BMVET(I) 32-50-2 to BMVET(I) 32-100. BMVET(I) 42-30-2 to BMVET(I) 42-50. BMVET(I) 65-20-1 to BMVET(I) 65-30. BMVET(I) 85-20-2 to BMVET(I) 85-30-2. 15.0 bar models: BMVET(I) 2-13 to BMVET(I) 2-26. BMVET(I) 3-31 to BMVET(I) 3-36. BMVET(I) 4-12 to BMVET(I) 4-22. BMVET(I) 32-110-2 to BMVET(I) 32-140. BMVET(I) 42-60-2 to BMVET(I) 42-130-2. BMVET(I) 65-40-2 to BMVET(I) 65-80-1. BMVET(I) 85-30-1 to BMVET(I) 85-60. Maximum operating temperature 100°C.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

2009028

Note:

Claims for flow rate are made by the manufacturer and not considered part of the listing.

Size:

DN25 (Pumps with 1, 2 or 3 m³/h rated flow rates). DN32 (Pumps with 4 m³/h rated flow rates). DN40 (Pumps with 8 m³/h rated flow rates). DN50 (Pumps with 12, 16 or 20 m³/h rated flow rates). DN65 (Pumps with 32 m³/h rated flow rates). DN80 (Pumps with 42 m³/h rated flow rates). DN100 (Pumps with 65 or 85 m³/h rated flow rates).

Marking:

EFAFLU and other technical information on data plate. Flow arrow, PN and DN on body.

Installation Requirements:

R001 R415

Expiry date:

30/09/2025

Model:

BMVE T X - Y - Z. BMVE TI X - Y - Z. Model key: BMVE = Pump series name. T = Stainless Steel AISI304. TI = Stainless Steel AISI316. X = rated flow rate in m³/h (1, 2, 3, 4, 8, 12, 16, 20, 32, 42, 65, 85). Y = number of stages (2-140). Z = number of small impellors (blank, 1 or 2).

Product Images

Approval Holder:

EFAFLU BOMBAS E VENTILADORES S.A

Company Name

EFAFLU BOMBAS E VENTILADORES S.A

Phone

+351 252 298 700

General Email

geral@efaflu.pt

View All Listings by this Company