Self-closing combination tap assembly (chromium plated brass) with a spring-loaded headwork controlling both temperature and flow with a dome type operating member. The spout outlet incorporates a plastic flow straightener. The flexible hose inlets incorporate a combined EPDM washer and stainless-steel strainer, as well as an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.

Section:

1820 Taps

Section Subtitle:

Self closing tap(s).

WRAS Approval Number:

240604004

Size:

Stainless steel or polyamide braided PEX lined flexible hose assemblies incorporating ½” captive nut end connections.

Marking:

Twyford on operating member.

Installation Requirements:

R001 R006 R009 R010

Expiry date:

30/06/2029

Model:

SF2104CP

Approval Holder:

Twyford Geberit Group

Company Name

Twyford Geberit Group

Address

Geberit House, Edgehill Drive, Warwick

Postcode

CV34 6NH

Country

United Kingdom

Phone

01926 516800

General Email

enquiries@geberit.co.uk

View All Listings by this Company

Range of PVC hoses incorporating EPDM washers. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.

Section:

1860 Tubes

Section Subtitle:

Plastic hoses.

WRAS Approval Number:

240604020

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

¾” x ¾” BSP Captive nut.

Marking:

Date of manufacture: MM/YYYY, WRAS, Wuxi Jinhua on outer layer.

Installation Requirements:

R001 R008

Expiry date:

30/06/2029

Model:

GJS/E-15CXB - Blue outer hose, GJS/E-15CXR - Red outer hose, GJS/E-15CXG - Gray outer hose.

Product Images

Approval Holder:

Wuxi Jinhua Yiyuan Technology Co.,Ltd.

Company Name

Wuxi Jinhua Yiyuan Technology Co.,Ltd.

Address

No. 3, Industrial Park Binhu District Wuxi City Jiangsu Province

Country

China

View All Listings by this Company

Manufacturer:

Wuxi Jinhua Yiyuan Technology Co.,Ltd.

Company Name

Wuxi Jinhua Yiyuan Technology Co.,Ltd.

Address

No. 3, Industrial Park Binhu District Wuxi City Jiangsu Province

Country

China

View All Listings by this Company

Range of PVC, Stainless Steel or Nylon shower hoses with PVC or EPDM inner hoses. Maximum operating temperature 65°C or 80°C (See Models) Open Outlet Use Only

Section:

1860 Tubes

Section Subtitle:

Plastic hoses.

WRAS Approval Number:

240602041

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” BSP (F) x ½” BSP (F) or ½” BSP (F) x M15x1 (M) (See Models)

Marking:

WRAS, Doflex and Year of Manufacture (YYYY) on connector

Installation Requirements:

R001

Expiry date:

30/06/2029

Model:

DP007-16 (PVC Outer, PVC Inner, 65°C, BSP x BSP) KH008CR (Stainless Steel Outer, PVC Inner, 65°C, BSP x M) KH010 (Nylon Outer, EPDM Inner, 80°C, BSP x M) SH001CR (Stainless Steel Outler, PVC Inner, 65°C, BSP x BSP)

Product Images

Approval Holder:

Yuyao Doflex Sanitary Ware Hose Co., Ltd

Company Name

Yuyao Doflex Sanitary Ware Hose Co., Ltd

Address

No.2 Chuangsheng West Road, Wuma Industry Area, Lubu Town, Yuyao City, Zhejiang, China

View All Listings by this Company

Range of stainless-steel braided EPDM lined flexible hose assemblies with EPDM seals, available with a variety of end connections, some of which include isolation valves (see model). Maximum working pressure 10 Bar. Maximum operating temperature 85°C

Section:

1863 Tubes

Section Subtitle:

Elastomeric.

WRAS Approval Number:

240202085

Size:

See Models

Marking:

MF, WRAS and Date of manufacture (YYYY) on ferrule.

Installation Requirements:

R001

Expiry date:

28/02/2029

Model:

MFLEXTC150330, 30cm length MFLEXTC150415, 15cm length MFLEXTC150430, 30cm length MFLEXTC150450, 50cm length MFLEXTC150490, 90cm length MFLEXTC150630, 30cm length MFLEXTC150650, 50cm length MFLEXTC150690, 60cm length MFLEXTC220630, 30cm length MFLEXTC220650, 50cm length MFLEXTC220690, 90cm length MFLEXTC151530, 30cm length MFLEXTC151550, 50cm length MFLEXTC151590, 90cm length MFLEXTC222230, 30cm length MFLEXTC222250, 50cm length MFLEXTC150430M, 30cm length MFLEXTC1504V MFLEXTC1506V MFLEXTC2206V MFLEXTC150415V, 15cm length MFLEXTC1510450V, 50cm length MFLEXTC1510650V, 50cm length MFLEXMTC1004 (suit, Set of 2 type) MFLEXMTC100450, 50cm length(suit, Set of 2 type) MFLEXMTC1204 (suit, Set of 2 type) MFLEXMTC120450 (suit, Set of 2 type) MFLEXMTC1015 (suit, Set of 2 type) MFLEXMTC101550, 50cm length(suit, Set of 2 type) MFLEXMTC1215 (suit, Set of 2 type) MFLEXMTC121550, 50cm length(suit, Set of 2 type) MFLEXTC040430, 30cm length MFLEXTC040450, 50cm length DN8 GMF0813S - M10 short male x 3/8"F captive nut GMF0813L - M10 Long male x 3/8"F captive nut GMF0815S - M10 short male x 1/2"F captive nut GMF0815L - M10 Long male x 1/2"F captive nut GMF0803S - M8 short male x 3/8"F captive nut GMF0823S - M12 short male x 3/8"F captive nut GMF0823L - M12 Long male x 3/8"F captive nut GMF0825S - M12 short male x 1/2"F captive nut GMF0825L - M12 Long male x 1/2"F captive nut DN10 GMF1013S - M10 short male x 3/8"F captive nut GMF1013L - M10 Long male x 3/8"F captive nut GMF1015S - M10 short male x 1/2"F captive nut GMF1015L - M10 Long male x 1/2"F captive nut GMF1023S - M12 short male x 3/8"F captive nut GMF1023L - M12 Long male x 3/8"F captive nut GMF1025S - M12 short male x 1/2"F captive nut GMF1025L - M12 Long male x 1/2"F captive nut DN13 GMF1313S - M10 short male x 3/8"F captive nut GMF1313L - M10 Long male x 3/8"F captive nut GMF1315S - M10 short male x 1/2"F captive nut GMF1315L - M10 Long male x 1/2"F captive nut GMF1323S - M12 short male x 3/8"F captive nut GMF1323L - M12 Long male x 3/8"F captive nut GMF1325S - M12 short male x 1/2"F captive nut GMF1325L - M12 Long male x 1/2"F captive nut GAN series DN8 GAN0833 - 3/8"F x 3/8"F captive nut GAN0835 - 3/8"F x 1/2"F captive nut GAN0855 - 1/2"F x 1/2"F captive nut GAN0877 - 3/4"F x 3/4"F captive nut GAN0857 - 1/2"F x 3/4"F captive nut DN10 GAN1033 - 3/8"F x 3/8"F captive nut GAN1055 - 1/2"F x 1/2"F captive nut GAN1077 - 3/4"F x 3/4"F captive nut DN13 GAN1333 - 3/8"F x 3/8"F captive nut GAN1355 - 1/2"F x 1/2"F captive nut GAN1377 - 3/4"F x 3/4"F captive nut GAM series DN8 GAM0833 - 3/8"M x 3/8"F captive nut GAM0835 - 3/8"M x 1/2"F captive nut GAM0853 - 1/2"M x 3/8"F captive nut GAM0855 - 1/2"M x 1/2"F captive nut GAM0877 - 3/4"M x 3/4"F captive nut DN10 GAM1033 - 3/8"M x 3/8"F captive nut GAM1035 - 3/8"M x 1/2"F captive nut GAM1053 - 1/2"M x 3/8"F captive nut GAM1055 - 1/2"M x 1/2"F captive nut GAM1077 - 3/4"M x 3/4"F captive nut DN13 GAM1333 - 3/8"M x 3/8"F captive nut GAM1335 - 3/8"M x 1/2"F captive nut GAM1353 - 1/2"M x 3/8"F captive nut GAM1355 - 1/2"M x 1/2"F captive nut GAM1377 - 3/4"M x 3/4"F captive nut GMM series DN8 GMM0833 - 3/8"M x 3/8"M GMM0855 - 1/2"M x 1/2"M DN10 GMM1033 - 3/8"M x 3/8"M GMM1055 - 1/2"M x 1/2"M GMM1055 - 1/2"M x 1/2"M DN13 GMM1355 - 1/2"M x 1/2"M GMM1377 - 3/4"M x 3/4"M GEF series DN8 GEF0833 - 3/8"Elbow F x 3/8"F GEF0835 - 3/8"Elbow F x 1/2"F GEF0853 - 1/2"Elbow F x 3/8"F GEF0855 - 1/2"Elbow F x 1/2"F DN10 GEF1055 - 1/2"Elbow F x 1/2"F GEF1057 - 1/2"Elbow F x 3/4"F GEF1077 - 3/4"Elbow F x 3/4"F DN13 GEF1355 - 1/2"Elbow F x 1/2"F GEF1357 - 1/2"Elbow F x 3/4"F GEF1377 - 3/4"Elbow F x 3/4"F GEM series DN8 GEM0833 - 3/8"Elbow F x 3/8"M GEM0835 - 3/8"Elbow F x 1/2"M GEM0853 - 1/2"Elbow F x 3/8"M GEM0855 - 1/2"Elbow F x 1/2"M DN10 GEM1055 - 1/2"Elbow F x 1/2"M GEM1057 - 1/2"Elbow F x 3/4"M GEM1077 - 3/4"Elbow F x 3/4"M DN13 GEM1355 - 1/2"Elbow F x 1/2"M GEM1357 - 1/2"Elbow F x 3/4"M GEM1377 - 3/4"Elbow F x 3/4"M GMC series DN8 GMC0815S - M10 short male x 15mm compression GMC0815L - M10 Long male x 15mm compression GMC0825S - M12 short male x 15mm compression GMC0825L - M12 Long male x 15mm compression DN10 GMC1015S - M10 short male x 15mm compression GMC1015L - M10 Long male x 15mm compression GMC1025S - M12 short male x 15mm compression GMC1025L - M12 Long male x 15mm compression DN13 GMC1315S - M10 short male x 15mm compression GMC1315L - M10 Long male x 15mm compression GMC1325S - M12 short male x 15mm compression GMC1325L - M12 Long male x 15mm compression GAC series DN8 GAC0855 - 15mm compression x 1/2"F captive nut GAC0857 - 15mm compression x 3/4"F captive nut GAC0877 - 22mm compression x 3/4"F captive nut DN10 GAC1053 - 15mm compression x 3/8"F captive nut GAC1055 - 15mm compression x 1/2"F captive nut GAC1057 - 15mm compression x 3/4"F captive nut GAC1077 - 22mm compression x 3/4"F captive nut DN13 GAC1355 - 15mm compression x 1/2"F captive nut GAC1357 - 15mm compression x 3/4"F captive nut GAC1377 - 22mm compression x 3/4"F captive nut GAC1977 - DN19 22mm compression x 3/4"F captive nut GVF series DN8 GVF0855 - 15mm isolating valve x 1/2"F captive nut GVF0877 - 22mm isolating valve x 3/4"F captive nut DN10 GVF1055 - 15mm isolating valve x 1/2"F captive nut GVF1057 - 15mm isolating valve x 3/4"F captive nut GVF1077 - 22mm isolating valve x 3/4"F captive nut DN13 GVF1355 - 15mm isolating valve x 1/2"F captive nut GVF1377 - 22mm isolating valve x 3/4"F captive nut GVF1977 - DN19 22mm isolating valve x 3/4"F captive nut GDC series DN8 GDC0855 - 15mm compression x 15mm compression GDC0877 - 22mm compression x 22mm compression DN GDC1055 - 15mm compression x 15mm compression GDC1077 - 22mm compression x 22mm compression DN13 GDC1355 - 15mm compression x 15mm compression GDC1377 - 22mm compression x 22mm compression DN19 GDC1977 - 22mm compression x 22mm compression GDEF series DN13 GDEF1355 - 1/2"Elbow F x 1/2"Elbow F

Approval Holder:

Masterflow Products Limited

Company Name

Masterflow Products Limited

Address

Globall House 95 Vantage Point West Mindlands

Postcode

DY6 7FT

Country

United Kingdom

View All Listings by this Company

Range of stainless steel or brass double interlocking, TPS lined flexible hose assemblies (various finishes) incorporating EPDM gaskets. Maximum operating temperature 60°C. Open Outlet Use Only

Section:

1863 Tubes

Section Subtitle:

Elastomeric.

WRAS Approval Number:

240602038

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See model

Marking:

IL Flessibile logo, WRAS & date of manufacture (MM/YY) on end connections

Installation Requirements:

R001

Expiry date:

30/06/2029

Model:

Model Code: FXF2CX.AABBCCCC.DDD FXF2CX Trade Name Explanation: FX = Double interlock hose in brass or stainless steel F = TPS Inner Tube 2: Brass Rubber Holders C: WRAS Approved X: Connection Combinations, where X can be replaced with any of the following: A = ½” BSP (F) x ½” BSP (F) B = ½” BSP (F) x M15x1 F = ½” BSP (F) x 3/8” BSP (M) H = ½” BSP (F) x 3/8” BSP (F) I = M15x1 x M15x1 L = M15x1 x 3/8” BSP (M) M = M15x1 x 3/8” BSP (F) Q = 3/8” BSP (M) x 3/8” BSP (M) R = 3/8” BSP (M) x 3/8” BSP (F) S = 3/8” BSP (F) x 3/8” BSP (F) T = ½” BSP (F) x M12x1 AABBCCCC.DDD Trade Name Explanation: AA: identifies hose raw material and diameter, which can be replaced with any of the following: AC = Brass CW508L 022 External diameter 14 AD = Brass CW508L 026 External diameter 14 AQ = Brass CW508L 022 External diameter 15 AR = Brass CW508L 026 External diameter 15 AV = Brass CW508L 022 External diameter 17 AW = Brass CW508L 026 External diameter 17 AF = INOX AISI 304 External diameter 14 AS = INOX AISI 304 External diameter 15 AX = INOX AISI 304 External diameter 17 AJ = Brass CW 508L 022 External diameter 12 BB: identifies the type of external finish, and can be replaced with any of the following: CR = Chromed CZ = Brushed Chrome GM = Raw Brass NS = Brushed Nickel NZ = Brushed Nickel Phosphor IG = Raw INOX IS = Brushed INOX PO = PVD Gold PA = PVD Gold Brushed PG = PVD Black Metal PB = PVD Black Metal Brushed PH = PVD Champagne Brushed PR = PVD Copper Bronze PE = PVD Copper Bronze Brushed PI = PVD Grey 07 Brushed PK = PVD High Brass PQ = PVD High Brass Brushed PM = PVD Pale Gold Brushed PC = PVD Rose Gold Family Surface finishes: Raw, Chromed, Electropolished, Polished, Various Galvanics Finishing, Various PVD Finishing, Various Paint Finishing. CCCC: identifies the type of fittings, which can be replaced with any of the following: Any combination of (2) alphanumeric characters denoting only external aesthetic fittings dimensions. All of fittings are unwetted. DDD: identifies the length (between 50 and 200cm), and can be replaced with any of the following as examples: 050 = 50cm length, 100 = 100cm length, 150 = 150cm length, 200 = 200cm length.

Product Images

Approval Holder:

IL FLESSIBILE di Nicastri e C srl

Company Name

IL FLESSIBILE di Nicastri e C srl

Address

VIA FELICE VEDANI 16 INVORIO

Postcode

28045

Country

Italy

Phone

+39 335 5948283

General Email

g.buratti@ilflessibile.it

View All Listings by this Company

Manufacturer:

IL FLESSIBILE di Nicastri e C srl

Company Name

IL FLESSIBILE di Nicastri e C srl

Address

VIA FELICE VEDANI 16 INVORIO

Postcode

28045

Country

Italy

Phone

+39 335 5948283

General Email

g.buratti@ilflessibile.it

View All Listings by this Company

Range of stainless-steel or nylon braided PEX lined hoses, incorporating EPDM O-ring or gaskets. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:

1863 Tubes

Section Subtitle:

Elastomeric.

WRAS Approval Number:

240604017

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

DN8

Marking:

Company Logo DJ, WRAS and date of manufacture (YYYY-MM) on ferrule.

Installation Requirements:

R001 R008

Expiry date:

30/06/2029

Model:

DJB-A-A-B-*** A - Type of Nut/Connection Fitting -01: M8 -02: M10 -03: M12 -04: M15 -05: F3/8 -06: F1/2 -07: F3/4 -08: F15 -09: M3/8 -10: M1/2 -11: M3/4 -12: G1/2 -13: Quick coupling (M) -14: Quick coupling (F) B - Braiding -01: Stainless steel -02: Nylon ***- Length 10cm-300cm

Product Images

Approval Holder:

Jiangmen Dijie Sanitary Ware Industrial Co. Ltd.

Company Name

Jiangmen Dijie Sanitary Ware Industrial Co. Ltd.

Address

No. 58 Jinshan East Avenue Shuikou Town Kaiping City Guangdong

Country

China

View All Listings by this Company

Manufacturer:

Jiangmen Dijie Sanitary Ware Industrial Co. Ltd.

Company Name

Jiangmen Dijie Sanitary Ware Industrial Co. Ltd.

Address

No. 58 Jinshan East Avenue Shuikou Town Kaiping City Guangdong

Country

China

View All Listings by this Company

Range of stainless steel braided TPSiV lined flexible hose assemblies incorporating EPDM O-rings. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C

Section:

1863 Tubes

Section Subtitle:

Elastomeric.

WRAS Approval Number:

240604021

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

see models

Marking:

Tucai, WRAS, Date of manufacture: TB-YY/DDD etched on crimp connection

Installation Requirements:

R001 R008

Expiry date:

30/06/2029

Model:

206525 TAQ FLX DN6 HG 3838 3/8” BSP (F) captive nut x 3/8” BSP (F) captive nut 208895 TAQ FLX CODO HG 3838 3/8” BSP (F) captive nut x 3/8” BSP (F) elbow incorporating captive nut

Product Images

Approval Holder:

Tucai SA

Company Name

Tucai SA

Address

Llobateras 10-12, Poligomo Industrial Santiga, 08210 Barbera Del Valles (Barcelona)

Country

Spain

Phone

+34 93 718 9562

View All Listings by this Company

Manufacturer:

Tucai Bulgaria SP Ltd.

Company Name

Tucai Bulgaria SP Ltd.

Address

7538 Aydemir Village 39 Chernozem Street Silistra Region

Country

Bulgaria

View All Listings by this Company

Range of chromium plated interlocked, PEX lined shower hoses with EPDM rubber gaskets. Maximum operating pressure: 6.0 bar. Maximum operating temperature 85°C.

Section:

1863 Tubes

Section Subtitle:

Elastomeric.

WRAS Approval Number:

240602042

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

7/8-20 UNEF-2B

Marking:

CHG, KW50 or KCW50 (depending on model), Year of production (20xx) and WRAS on ferrule.

Installation Requirements:

R001

Expiry date:

30/06/2029

Model:

KCW50-Y010-XX, KW50-Y010-XX. Where XX denotes the length and can be replaced with any of the following: 20 = 20” length 26 = 26” length 32 = 32” length 44 = 44” length

Product Images

Approval Holder:

CHG Europe B.V.

Company Name

CHG Europe B.V.

Postcode

THE NETHERLANDS

View All Listings by this Company

Range of air venting valves incorporating an epoxy coated, iron body and a drain point. Maximum working pressure 16.0 bar. Maximum operating temperature 60˚C.

Section:

1980 Valves

Section Subtitle:

Air venting. Fittings in this section are suitable for above ground installations only.

WRAS Approval Number:

2104083

Note:

Fittings in this section are suitable for above ground installations only.

Size:

See model.

Marking:

Saint-Gobain PAM, DN, PN, model and year of manufacture (YYYY) on data plate. Size and year of manufacture (YYYY) on body.

Installation Requirements:

R001

Expiry date:

30/04/2026

Model:

Double orifice FB/L 1” & 2” BSP female inlet. DN50 - DN200. Double orifice with anti-surge FBA/LA 1” & 2” BSP female inlet DN50 - DN200. Double orifice with rapid fill protection FBR/LR 1 & 2” BSP female inlet DN50 - DN200.

Approval Holder:

Saint-Gobain PAM Italia s.r.l

Company Name

Saint-Gobain PAM Italia s.r.l

Address

Via Bensi 8-20152

Country

Italy

View All Listings by this Company

Manufacturer:

Saint-Gobain PAM Italia s.r.l

Company Name

Saint-Gobain PAM Italia s.r.l

Address

Via Bensi 8-20152

Country

Italy

View All Listings by this Company

Range of wall mounted, concealed, manually operated blending valves with brass bodies (various finish trim kits - see model) incorporating a ceramic cartridge headwork with a single lever operating member. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:

2000 Shower Valves

Section Subtitle:

Shower valve(s) with manual temperature control.

WRAS Approval Number:

2104084

Note:

This approval does not include a shower hose, shower handset or spout outlet.

Size:

½” BSP (F)

Marking:

Bagnodesign on faceplate.

Installation Requirements:

R001 R010 R040

Expiry date:

30/04/2026

Model:

BRISTOL CONCEALED SHOWER MIXER BDM-BIS-410L-XX XX’ denotes finish and is replaced with: Chrome(CP), Brushed Nickel (NB), Matt Black(MB), Anthracite (AN), Gold (GD), PVD Gold (PG), Soft Bronze (SBZ), Santiago (RCP), Oyster (OYS) Burgundy (BUR) Black (MB-C)

Approval Holder:

BAGNODESIGN (SANIPEXGROUP)

Company Name

BAGNODESIGN (SANIPEXGROUP)

Address

Unit 1 Oakwell Park Trading Estate Birstall Leeds

Postcode

WF17 9LU

Country

United Kingdom

General Email

dan@sanipexgroup.com

View All Listings by this Company