Water Regulations Approval Scheme Ltd

Directory Search Results

WRAS Approval Number: #2304516

‘EE8000 – 5006836 & EE8000-5006835'. Factory applied, blue coloured epoxy powder coatings. Apply by fusion bond dip as per Product Data Sheet 'version 5.0' dated '25/07/2024'. Cure for 7 minutes@200°C. For use with water up to 70°C. This material is only approved for the curing conditions that appear on the approval. If the cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:: 5030 Coatings, Paints & Linings
Section Subtitle:: Factory applied pipe & fittings coatings.
WRAS Approval Number:: 2304516
Expiry date:: 30/04/2028

Approval Holder:: PPG Huajia Technology (Huangshan) Co., Ltd.

Company Name
PPG Huajia Technology (Huangshan) Co., Ltd.
Address
Huangshan Branch, No. 668 Yongjia Avenue, HuiZhou District, Huangshan City
Country
China

View All Listings by this Company

WRAS Approval Number: #2302557

'A/W AQUA (A) Epoxy 100'. Site applied, pale straw coloured epoxy/linseed oil waterproof coating. Apply as per manufacturer's Technical Document 'FSQP-707-05' dated '2021.01.04'. Cure for 6 hours under UV light (wavelength 365μm) at a distance of 150mm. For use with water up to 23°C. This material is only approved for the curing conditions that appear on the approval. If the cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:: 5042 Coatings, Paints & Linings
Section Subtitle:: Site applied pipe and fittings coatings. Compliance with BS6920 relates to the conditions of cure specified in the listing. If the cure conditions are varied from those described below then compliance with BS6920 cannot be assummed without further testing. Where catalysts are required, only tested catalysts in the recommended concentrations should be used. Manufacturer's advice must be sought if any non standard mixing or curing conditions are being considered.
WRAS Approval Number:: 2302557
Expiry date:: 29/02/2028

Approval Holder:: FRSI Corp.

Company Name
FRSI Corp.
Address
No.315. Knowledge Industry Center, JEONNAM TECHNOPARK, 13, Yulchonsandan 4-ro, Haeryong-myeon, Suncheon-si, Jeollanam-do
Country
Korea, Republic of

View All Listings by this Company

WRAS Approval Number: #2303536

‘MasterProtect® 180’. Site applied, grey coloured, two-component epoxy coating consisting of Part A (grey coloured liquid) and Part B (colourless liquid). Mix Part A and Part B in a mass ratio of 87:13 and apply as per manufacturer's TDS 'MBS_CC-UAE/Pr_180/ /03_23'. Cure coat 1 for 36 hours@20°C. Cure coat 2 for 21 days@20°C. For use with water up to 40°C. This material is only approved for the mixing and curing conditions that appear on the approval. If the mixing and/or curing conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:: 5042 Coatings, Paints & Linings
Section Subtitle:: Site applied pipe and fittings coatings. Compliance with BS6920 relates to the conditions of cure specified in the listing. If the cure conditions are varied from those described below then compliance with BS6920 cannot be assummed without further testing. Where catalysts are required, only tested catalysts in the recommended concentrations should be used. Manufacturer's advice must be sought if any non standard mixing or curing conditions are being considered.
WRAS Approval Number:: 2303536
Expiry date:: 31/03/2028

Approval Holder:: Master Builders Solutions Construction Chemicals LLC

Company Name
Master Builders Solutions Construction Chemicals LLC
Address
PO Box 37127, Dubai Investment Park, Phase 1 Expo Road, Dubai
Country
United Arab Emirates

View All Listings by this Company

WRAS Approval Number: #2205574

'Maxline 100 Potable Water Coating Blue & Grey'. Site applied, two-component polyurethane coatings which are available in blue or grey colours (once mixed). Mix Part A (blue or grey opaque liquid) with Part B (amber, translucent liquid) in a 100:30.5 weight ratio and apply as per manufacturer's technical data sheet 'TDSMLI100.rv5.04042023'. Cure for 14 days@7°C. For use with water up to 23°C. This material is only approved for the mixing and curing conditions that appear on the approval. If the mixing and/or curing conditions are varied from those specified on the approval then the materials are not covered by the scope of the approval.

Section:: 5042 Coatings, Paints & Linings
Section Subtitle:: Site applied pipe and fittings coatings. Compliance with BS6920 relates to the conditions of cure specified in the listing. If the cure conditions are varied from those described below then compliance with BS6920 cannot be assummed without further testing. Where catalysts are required, only tested catalysts in the recommended concentrations should be used. Manufacturer's advice must be sought if any non standard mixing or curing conditions are being considered.
WRAS Approval Number:: 2205574
Expiry date:: 31/05/2027

Approval Holder:: Maxkote Ltd.

Company Name
Maxkote Ltd.
Address
Clifton Moor, York
Postcode
YO30 4XL
Phone
+44 1904 809 773
General Email
info@maxkote.co.uk

View All Listings by this Company

WRAS Approval Number: #2304518

'BELPA CSA 520'. Light green coloured NBR/fibre gasket material made by calendaring. For use with water up to 85°C. For use only as a jointing/gasket material having been tested at a reduced surface area to volume ratio

Section:: 5075 Fibre
Section Subtitle:: These materials are for use only as a jointing/gasket material having been tested at reduced surface area to volume ratio.
WRAS Approval Number:: 2304518
Expiry date:: 30/04/2028

Approval Holder:: Montero FYE S.A.

Company Name
Montero FYE S.A.
Address
Retuerto 15, 48903 Baracaldo
Country
Spain
Phone
+34 94 418 0011
General Email
raul@monterofye.com

View All Listings by this Company