Directory Search Results

Print List

#2303402

Range of commercial dish washing machines with flow controlled by a solenoid valve and discharged via a type `AB` airgap (verified by test - suitable for backflow protection against fluid category 5). Maximum working pressure 4.0 bar. Cold water use only.

Section:
2390 Washing Machines
Section Subtitle:
Dish. Washing machines in this section will indicate the category of backflow prevention built into each appliance. The location and the use of the washing machine will determine any additional backflow protection that may be required.
WRAS Approval Number:
2303402
Size:
¾” BSP(F) captive nut
Marking:
'FAGOR' Professional & logo & address. Model, date, & technical data on label plate
Installation Requirements:
R001 R574
Expiry date:
31/03/2028
Model:
WLP-62, WLP-63, WLP-70 & WLP-130

Approval Holder:
Onnera Group S. Coop
Company Name
Onnera Group S. Coop
Address
Santxo Lopegeti Auzoa 22 20560 Onati-Gipuzkoa
Country
Spain

View All Listings by this Company

Print This Approval


#2309084

Magnetic scale reducer, incorporating chrome plated copper body, for use with copper pipe manufactured to BS EN1057. Maximum working pressure 10.0 bar. Cold water use only.

Section:
2410 Water conditioners, de-scalers, phosphate dosing, magnetic, electrolytic and electronic
Size:
15mm compression
Marking:
Plumbright, model and other information on label on body.
Installation Requirements:
R001 R120 R150 R170 R290
Expiry date:
30/09/2028
Model:
Plumbright 187856 15mm

Approval Holder:
Eclipse Magnetics Ltd
Company Name
Eclipse Magnetics Ltd
Address
Atlas Way, Atlas North, Sheffield, S4 7QQ, England.

View All Listings by this Company

Print This Approval


#250955006

'KH369AC'. Dark grey coloured, compression moulded carbon/graphite ring. For use with water up to 85°C.

Section:
5022 Carbon
Expiry date:
30/09/2030

Approval Holder:
Krishnaveni Carbon Products Private Limited
Company Name
Krishnaveni Carbon Products Private Limited
Address
475/1A, Moppiripalayam, Karumathampatti – Annur Road, Kaduvettipalayam (PO), Sulur (TK), Coimbatore – 641659
Country
India

View All Listings by this Company

Print This Approval


#250455053

'NM 96 & NM 99 Ceramic Discs'. Off-white coloured, compression moulded ceramic discs. For use with water up to 85°C.

Section:
5023 Ceramic
Expiry date:
30/04/2030

Approval Holder:
CoorsTek Advanced Materials Turnov s.r.o.
Company Name
CoorsTek Advanced Materials Turnov s.r.o.
Address
Za Viaduktem 2150 511 01 Turnov
Country
Czech Republic

View All Listings by this Company

Print This Approval


#250655013

'RADILON® S RV350RKC2 306 BK'. Black coloured, injection moulded, 35% glass fibre reinforced, PA6 material. For use with water up to 85°C.

Section:
5180 Nylon
Section Subtitle:
Material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
250655013
Expiry date:
30/06/2030

Approval Holder:
Radici Novacips SpA
Company Name
Radici Novacips SpA
Address
Via Bedeschi 20, 24040 Chignolo D'Isola (Bg)
Country
Italy
Phone
+39 35 4991303
General Email
ats.plastics@radicigroup.com

View All Listings by this Company

Print This Approval


#250655012

'1EP6052'. Black coloured, injection moulded EPDM material. Shore hardness 60. Tested in-radius size 1.12mm. For use with water up to 23°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
250655012
Expiry date:
30/06/2030

Approval Holder:
Sanok Rubber Company S.A.
Company Name
Sanok Rubber Company S.A.
Address
ul. Przemyska 24, 38-500 Sanok
Country
Poland

View All Listings by this Company

Print This Approval


#2212577

‘51M5577, 51M6077, 51M6577, 51M7077, 51M7577, 51M8077, 51M8577’. Black coloured, injection moulded EPDM materials. Shore hardness between 55A & 85A. Tested in-radius size 1.0mm. For use with water up to 85°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2212577
Expiry date:
31/12/2027

Approval Holder:
Effbe France
Company Name
Effbe France
Address
153 Rue du General de Gaulle, 68440 Habsheim
Country
France

View All Listings by this Company

Print This Approval


#250655008

'Lettergold External Leak Sealer'. Clear silicone sealant. Apply as per manufacturer's TDS 'Version 1', dated '16/07/2025'. Cure for 96 hours@23°C. For use with water up to 23°C. This material is only approved for the curing conditions that appear on the approval. If the cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:
5440 Sealants - Flat Faced Joints
Section Subtitle:
General.
WRAS Approval Number:
250655008
Expiry date:
30/06/2030

Approval Holder:
Lettergold Plastics Limited
Company Name
Lettergold Plastics Limited
Address
Unit 4 Hammond Close, Newmarket, Suffolk
Postcode
CB8 0AZ
Phone
+44 (0) 1638 666888
General Email
info@lettergold.co.uk

View All Listings by this Company

Print This Approval


#250555033

‘Grilamid TR 30 natural, TR 30 LS natural (appear colourless, translucent), TR 30 LS blue 4345, TR 30 LS blue 4387 & TR 30 LS blue 4396 (blue coloured)’. Injection moulded, PA 61/X materials. For use with water up to 85°C.

Section:
5585 Thermoplastic Moulding Compound
Expiry date:
31/05/2030

Approval Holder:
EMS-CHEMIE AG
Company Name
EMS-CHEMIE AG
Address
Via Innovativa 1, CH-7013 Domat/Ems
Country
Switzerland
Phone
+41 81 632 78 78
General Email
welcome@emsgrivory.com

View All Listings by this Company

Print This Approval


#250602712

Concealed WC dual flushing cistern with a vertical BS 1212-4 (2016) float operated inlet valve providing a Type AG air gap arrangement and a dual flush pneumatic outlet valve. The flush volume is operated by a two-push button assembly for a 6 or 3 litre flush volume. Maximum working pressure 10.0 Bar. Cold water use only

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
250602712
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
½” BSP (M)
Marking:
My life, Wras and model number on cistern, 6 Litre mark inside cistern.
Installation Requirements:
R001 R280 R556 R581
Expiry date:
30/06/2030
Model:
MLSOLCC

Approval Holder:
MyLife Bathrooms Limited
Company Name
MyLife Bathrooms Limited
Address
Greenbank Industrial Estate Rampart Road Newry Co. Down BT342QU Ireland

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 794 of 854

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.