Directory Search Results

Print List

#2209058

Range of non-verifiable double check valve assemblies consisting of two spring loaded resilient trim in-line check valve cartridges housed in DZR brass bodies. Maximum working pressure 16.0 bar Maximum operating temperature 85°C

Section:
0034 Backflow Prevention Devices
Section Subtitle:
SCHEDULE 2 - Section 6.2 Type ED - Non-verifiable double check valve.
WRAS Approval Number:
2209058
Marking:
ALBION, size, PN, flow arrow and CR on body
Installation Requirements:
R001
Expiry date:
30/09/2027
Model:
ART 36 RANGE OF NON-VERIFIABLE DOUBLE CHECK VALVES ½” BSP (F) inlet/outlet ¾” BSP (F) inlet/outlet 1” BSP (F) inlet/outlet 1.1/4" BSP (F) inlet/outlet 1½” BSP (F) inlet/outlet 1 2” BSP (F) inlet/outlet

Approval Holder:
Albion Valves (UK) Limited
Company Name
Albion Valves (UK) Limited
Address
9a Fallbank Industrial Estate Dodworth Barnsley
Postcode
S75 3LS
Country
United Kingdom
Phone
01226 729900
General Email
samjed@albionvalvesuk.com

View All Listings by this Company

Print This Approval


#2211812

‘Bubblestream’ range of tap outlet (stream shaper) adaptors incorporating a swivel mechanism and a stainless steel mesh aerator. All models, apart from 07.9870.0, are supplied with a M22 to M24 adaptor. All models, apart from 07.9870.0 & 07.9880.0, incorporate a plastic flow regulator. Maximum operating temperature 60°C.

Section:
0435 Taps and shower valves - Components
Section Subtitle:
Aerators, Flow Straighteners, Flow Regulators and Restrictors.
WRAS Approval Number:
2211812
Note:
Open outlet use only Claims made by the manufacturer for flow rate have not been tested and are not considered part of the approval listing.
Size:
M22 or M24
Marking:
Bubble stream on swivel connector
Installation Requirements:
R001 R010 R040
Expiry date:
30/11/2027
Model:
07.9870.0 Bubblestream M22 (no flow reg) 07.9880.0 Bubblestream M22 or M24 (no flow reg) 07.9881.0 Bubblestream M22 or M24 8.0 lpm 07.9882.0 Bubblestream M22 or M24 7.0 lpm 07.9883.0 Bubblestream M22 or M24 6.0 lpm 07.9884.0 Bubblestream M22 or M24 5.0 lpm

Approval Holder:
Neoperl GmbH
Company Name
Neoperl GmbH
Address
Klosterrunstrasse 9-11, Müllheim
Postcode
D-79379
Country
Germany
Phone
+49 7631 188 374
General Email
DE.Approvals@neoperl.com

View All Listings by this Company
Manufacturer:
Neoperl GmbH
Company Name
Neoperl GmbH
Address
Klosterrunstrasse 9-11, Müllheim
Postcode
D-79379
Country
Germany
Phone
+49 7631 188 374
General Email
DE.Approvals@neoperl.com

View All Listings by this Company

Print This Approval


#2210002

Range of thermostatic elements with copper bodies. Maximum operating temperature 90°C.

Section:
0442 Thermostatic cartridges
Section Subtitle:
Thermostatic cartridge(s) for installation into specifically dimensioned tap or shower valve bodies.
WRAS Approval Number:
2210002
Size:
M8
Marking:
ENJOY BATH and model on body
Installation Requirements:
R001
Expiry date:
31/10/2027
Model:
LG0829, LG5701, LGA253, LG0304, LG0874 & LG065X
Product Images

Approval Holder:
Shanghai Enjoy Bath Thermostatic Technology Co. Ltd (SMLG)
Company Name
Shanghai Enjoy Bath Thermostatic Technology Co. Ltd (SMLG)
Address
F-202 Building 5 No.84 Jinwen Road Zhuqiao Town
Phone
+86-21-50321360
General Email
markyu@smlgood.com

View All Listings by this Company
Manufacturer:
Shanghai Enjoy Bath Thermostatic Technology Co. Ltd (SMLG)
Company Name
Shanghai Enjoy Bath Thermostatic Technology Co. Ltd (SMLG)
Address
F-202 Building 5 No.84 Jinwen Road Zhuqiao Town
Phone
+86-21-50321360
General Email
markyu@smlgood.com

View All Listings by this Company

Print This Approval


#2201351

Range of single hole, single outlet (swivel) combination tap assemblies with brass bodies (various finishes), incorporating ceramic disc headworks and single lever operating members. The cold inlet to the tap incorporates incorporates an approved check valve cartridge which has been verified by test (as suitable for backflow protection against Fluid Category 2). The inlet of hose to the pull-out spray incorporates an approved check valve cartridge which has not been fully tested to demonstrate it provides backflow protection. The outlet of pull-out spray incorporates a plastic aerator. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
0445 Combination Tap Assemblies
Section Subtitle:
Tap(s) incorporating a pull-out/pull down spray where the airgap cannot be maintained after motive force is removed.
WRAS Approval Number:
2201351
Size:
Stainless-steel braided PEX line flexible hose assemblies incorporating ½” BSP captive nut end connections
Marking:
Clearwater on body.
Installation Requirements:
R001 R009 R090
Expiry date:
31/01/2027
Model:
LEV20CP, LEV20BN, LEV20BB, LEV20MB, SAN20CP, SAN20BN, SAN20BB, SAN20MB, SAN20SS, KAR20CP, KAR20BN, KAR20BB, KAR20MB & KAR20SS Kitchen mixer
Product Images

Approval Holder:
Clearwater Products Limited t/a Sterling
Company Name
Clearwater Products Limited t/a Sterling
Address
Shannon Place Tewkesbury Business Park Tewkesbury Gloucestershire
Postcode
GL20 8BB
Country
United Kingdom
Phone
0168429955

View All Listings by this Company

Print This Approval


#2201352

Range of single hole, single outlet (swivel) combination tap assemblies with brass bodies (various finishes), incorporating ceramic disc headworks and single lever operating members. The cold inlet to the tap incorporates incorporates an approved check valve cartridge which has been verified by test (as suitable for backflow protection against Fluid Category 2). The inlet of hose to the pull-out spray incorporates an approved check valve cartridge which has not been fully tested to demonstrate it provides backflow protection. The outlet of pull-out spray incorporates a plastic aerator. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
0445 Combination Tap Assemblies
Section Subtitle:
Tap(s) incorporating a pull-out/pull down spray where the airgap cannot be maintained after motive force is removed.
WRAS Approval Number:
2201352
Size:
Stainless steel braided, PEX lined flexible hose assemblies incorporating ½” captive nut end connections.
Marking:
Clearwater on body
Installation Requirements:
R001 R009 R010 R090
Expiry date:
31/01/2027
Model:
KIR20CP, KIR20BN, KIR30CP, KIR30BN, KIR30BB, KIR30MB, TOP30BN, TOP30BB & TOP30MB
Product Images

Approval Holder:
Clearwater Products Limited t/a Sterling
Company Name
Clearwater Products Limited t/a Sterling
Address
Shannon Place Tewkesbury Business Park Tewkesbury Gloucestershire
Postcode
GL20 8BB
Country
United Kingdom
Phone
0168429955

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 792 of 2278

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.