Directory Search Results

Fittings Materials
Print List

#241155022

'TC-7808-19'. Factory applied, grey coloured PTFE coating. Apply as per manufacturer's data sheet dated June 8, 2019. Cure for 20 minutes@380°C. For use with water up to 85°C. This material is only approved for the curing conditions that appear on the approval. If the cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:
5030 Coatings, Paints & Linings
Section Subtitle:
Factory applied pipe & fittings coatings.
WRAS Approval Number:
241155022
Expiry date:
30/11/2029
Approval Holder:
Zhejiang Wigo Intelligence Pump Co., Ltd.
Company Name
Zhejiang Wigo Intelligence Pump Co., Ltd.
Address
No. 2 Shengda Road, Zeguo Town, Wenling Town, Zhejiang
Country
China

View All Listings by this Company

Print This Approval

#240855046

'Enviroline 2405'. Site applied, off-white coloured (once mixed and applied), two-component epoxy. Mix parts A (light grey, opaque liquid) and B (white, opaque liquid) in a volume ratio of 2:1 and apply as per manufacturer's TDS 'Ref:10139', 'Issue Date:8/21/2017'. Cure for 7 days@25°C. For use with water up to 23°C. This material is only approved for the mixing and curing conditions that appear on the approval. If the mix and/or cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:
5042 Coatings, Paints & Linings
Section Subtitle:
Site applied pipe and fittings coatings. Compliance with BS6920 relates to the conditions of cure specified in the listing. If the cure conditions are varied from those described below then compliance with BS6920 cannot be assummed without further testing. Where catalysts are required, only tested catalysts in the recommended concentrations should be used. Manufacturer's advice must be sought if any non standard mixing or curing conditions are being considered.
WRAS Approval Number:
240855046
Expiry date:
31/08/2029
Approval Holder:
Akzo Nobel Saudi Arabia Ltd.
Company Name
Akzo Nobel Saudi Arabia Ltd.
Country
Saudi Arabia

View All Listings by this Company

Print This Approval

#241055064

'ELS 108 & ELS 101'. Extruded, multi-layered hoses comprising of a black coloured PVC inner layer, white coloured polyester middle layer and grey coloured PVC outer layer. For use with water up to 23°C.

Section:
5140 Hoses & Tubing
Expiry date:
31/10/2029
Approval Holder:
EL-SE Kablo ve Plastik Sanayi A.S.
Company Name
EL-SE Kablo ve Plastik Sanayi A.S.
Address
Geposb 11. Cadde No. 13, PK. 41400 Gebze
Country
Turkey

View All Listings by this Company

Print This Approval

#241055045

'T100M'. White coloured (translucent) grease. Apply as per manufacturer's instructions. For use with water up to 85°C.

Section:
5160 Lubricants
Expiry date:
31/10/2029
Approval Holder:
SHENZHEN EUBO NEW MATERIAL TECHNOLOGY CO.,LTD
Company Name
SHENZHEN EUBO NEW MATERIAL TECHNOLOGY CO.,LTD
Address
2/F, Building 1, Xinchen New Materials Pilot Industrialization Base, No. 300, Shutianpu Road, Shutianpu Community, Matian Street, Guangming District, Shenzhen, Guangdong
Country
China

View All Listings by this Company

Print This Approval

#241155019

'TP-A25-PA12'. Dark grey coloured, injection moulded, PA12 bonded strontium ferrite magnet. For use with water up to 50°C.

Section:
5165 Magnetic Material
Expiry date:
30/11/2029
Approval Holder:
Aleph Electronics (Shenzhen) Co., Ltd.
Company Name
Aleph Electronics (Shenzhen) Co., Ltd.
Address
A20 Hengfeng Industrial City, He Zhou, Bao An Qu, Shenzhen
Country
China

View All Listings by this Company

Print This Approval

#250155007

'DZT PANT I1000-NC; DZT PANT I10G05-NC; DZT PANT I10G10-NC; DZT PANT I10G15-NC; DZT PANT I10G20-NC; DZT PANT I10G25-NC; DZT PANT I10G30-NC; DZT PANT I10G35-NC; DZT PANT I10G40-NC; DZT PANT I10G45-NC; DZT PANT I10G50-NC; DZT PANT I10G55-NC; DZT PANT I10G60-NC; DZT PANT I10G65-NC (un-pigmented - appears beige)’. ‘DZT PANT I10G05-BK; DZT PANT I10G10-BK; DZT PANT I10G15-BK;DZT PANT I10G20-BK;DZT PANT I10G25-BK; DZT PANT I10G30-BK; DZT PANT I10G35-BK;DZT PANT I10G40-BK;DZT PANT I10G45-BK; DZT PANT I10G50-BK; DZT PANT I10G55-BK; DZT PANT I10G60-BK; DZT PANT I10G65-BK (black coloured)'. Injection moulded PA materials. For use with water up to 85°C.

Section:
5180 Nylon
Section Subtitle:
Material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
250155007
Expiry date:
31/01/2030
Approval Holder:
Jiangmen De Zhong Tai Engineering Plastics Technology Co., Ltd.
Company Name
Jiangmen De Zhong Tai Engineering Plastics Technology Co., Ltd.
Address
3rd Building, East Gaoxin Road No. 33, Hi-Tech Zone, Jiangmen City, Guangdong Province
Country
China

View All Listings by this Company

Print This Approval

#250355006

'ForTii Ace WX51-FC NA99001'. Natural (appears beige in colour), injection moulded Polyamide material. For use with water up to 85°C.

Section:
5180 Nylon
Section Subtitle:
Material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
250355006
Expiry date:
31/03/2030
Approval Holder:
Envalior
Company Name
Envalior
Address
Flughafenstrasse 101, 40474 Dusseldorf
Country
Germany

View All Listings by this Company

Print This Approval

#250255008

'Durethan BKV15F 901510 DUS018'. Black coloured, injection moulded PA6 GF 15 material. For use with water up to 85°C.

Section:
5180 Nylon
Section Subtitle:
Material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
250255008
Expiry date:
28/02/2030
Approval Holder:
Envalior
Company Name
Envalior
Address
Flughafenstrasse 101, 40474 Dusseldorf
Country
Germany

View All Listings by this Company

Print This Approval

#241055041

'Aquapipe'. Black coloured, extruded HDPE (PE100) pipe. For use with water up to 23°C.

Section:
5240 Polyethylene
Section Subtitle:
Components. All components listed in this section have been tested for water contact suitability of material only.
WRAS Approval Number:
241055041
Expiry date:
31/10/2029

Print This Approval

#240955059

'GPS CRP100 Black Pipe'. Black coloured, extruded PE100 pipe. For use with water up to 23°C.

Section:
5240 Polyethylene
Section Subtitle:
Components. All components listed in this section have been tested for water contact suitability of material only.
WRAS Approval Number:
240955059
Expiry date:
30/09/2029
Approval Holder:
Aliaxis UK Ltd.
Company Name
Aliaxis UK Ltd.
Address
35 St Peter’s Road, Huntingdon
Postcode
PE29 7DA
Country
United Kingdom
Phone
01622852761
General Email
david.cousins@aliaxis.com

View All Listings by this Company

Print This Approval


Show Per Page
5102050Show All

Back To Directory Sections

Page 792 of 1012

© WRAS 2025 | Update Cookie Consent

Site Developed By Duo

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.