Directory Search Results

Print List

#250855046

'Smart S-IRE'. Site applied, light pink coloured, two-part (resin & hardener is automatically mixed in a 3:1 volume ratio through dispensing nozzle) anchor resins. Apply and cure as per ’T Load’ cures set out in Table B3 of European Technical Assessment ‘ETA 17/0187’, dated ‘29/11/2023’. For use with water up to 65°C. If the cure conditions are varied from those specified in ’T Load’ cures set out in set out in Table B3 of European Technical Assessment ‘ETA 16/0884’ then the materials are not covered by the scope of the approval. For use only as a resin anchor having been tested at a reduced surface area to volume ratio of 1,000mm² per 1 litre of water.

Section:
5311 Resin Anchors
Expiry date:
31/08/2030

Approval Holder:
PGB-Polska
Company Name
PGB-Polska
Address
Ul. Fryderyka Wilhelma Redena 3, 41-807 Zabrze
Country
Poland

View All Listings by this Company

Print This Approval


#251255070

‘AquaFlex T 5818’. Black coloured, compression moulded EPDM material. Shore hardness 70. Tested in-radius size 1.1mm. For use with water up to 23°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
251255070
Expiry date:
31/12/2030

Approval Holder:
Compounds AG
Company Name
Compounds AG
Address
Barzloostrasse 1, 8330 Pfaffiken ZH, Switzerland
Phone
+41 44 953 34 36
General Email
info@compounds.ch

View All Listings by this Company

Print This Approval


#260155051

'01/T60FKM 'O' rings and gaskets' – for use with water up to 23°C. 01/T70FKM & 01/T80FKM 'O' rings and gaskets' – for use with water up to 85°C. Green coloured, injection moulded FKM 'O' rings and gaskets. Shore hardness between 60 & 80. In-radius size between 0.5mm & 3.5mm.

Section:
5370 Rubbers
Section Subtitle:
Fluoroelastomers - components.
WRAS Approval Number:
260155051
Expiry date:
31/01/2031

Approval Holder:
LAV.EL. Gomma Srl
Company Name
LAV.EL. Gomma Srl
Address
Via Aldo Moro 20/22 25033 - Cologne (BS)
Country
Italy
Phone
0039.030.70.50.956
General Email
info@lavelgomma.it

View All Listings by this Company

Print This Approval


#251102048

Range of side entry BS1212-4 (2016), delayed action or non-delayed action type float operated valves for WC flushing cisterns. The inlet incorporates an optional flow restrictor. Maximum working pressure 10.0 Bar Maximum operating temperature Cold water use only.

Section:
2075 Float Operated Inlet Valve
Section Subtitle:
Can be used to achieve a recognised air gap arrangement, providing it meets the appropriate backflow requirements. Suitable for use in a WC suite, provided it forms an arrangement which meets the requirements of Type AUK1 air gap and an appropriate WC performance specification.
WRAS Approval Number:
251102048
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Note:
Model M3230WR can be supplied with either a brass or plastic ½” connection, a plastic 3/8” connection and either delayed or non-delayed action type float valve.
Size:
3/8” BSP (M) 1/2” BSP (M) (brass or plastic inlet connection)
Marking:
Miellat, Model number & BS1212-4 on body.
Installation Requirements:
R001 R550
Expiry date:
30/11/2030
Model:
M3230WR

Approval Holder:
Miellat Industries LLC
Company Name
Miellat Industries LLC
Address
Unit B-24, KEZAD Logistics Park, 2 Al Zaeem St, Khalifa Industrial Zone Abu Dhabi
Country
U.A.E
General Email
info@miellat.com

View All Listings by this Company

Print This Approval


#260215301

Section:
0551 Combination Tap Assemblies
Description:
A Two hole tap(s) with a single outlet and swivel spout, incorporating a manual diverter to a shower outlet
Wall mounted.
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Installation Requirements:
R001 R010 R040
Expiry date:
28/02/2031

Product IdentificationSurface Finish / ColourDimensionMax Working Pressure (bar)Max Operating Temp (°C)MarkingMarking locationAll metals in the water pathway are on the 4msi positive listHeadwork for Flow ControlFixing TypeSpout OutletIncludes
S010*Various1/2" BSP (M)1065WINSDRUMOn bodyNoCeramic cartridgeNot ApplicableAeratorShower Hose, Handset, Fixed Head, Riser Rail

Notes & Further Information

* denotes finish and can be replaced by: C - Chrome RG - Rose Gold BTG - Brushed Titanium gold BZG - Brushed Zirconium gold BRG - Brushed Rose gold MW - Matte white BS - Brushed stainless BN - Brushed nickel PN - Polished nickel GM - Gunmetal B - Matte black TG - Titanium gold ZG - Zirconium gold BC - Black+chrome W - White CW - Chrome+white Q - Quartzite ZGC - Zirconium gold+chrome TGC - Titanium gold+chrome M - Medieval A - Antique bronze CP - Champagne BL - Brushed lead BP - Polished Black


Approval Holder:
WINSDRUM Technology (Foshan) Co., Ltd
Company Name
WINSDRUM Technology (Foshan) Co., Ltd
Address
Room 804-805, Flat 2, Jiabang Guojin Center, No.1 Shilong South Road, Guicheng Street, Nanhai District, Foshan City, Guangdong Province
Country
China
Phone
0086-19527590441
General Email
carina07@126.com

View All Listings by this Company

Print This Approval


#260112008

Range of floor mounted, single hole, single outlet, swivel combination tap assemblies, chrome plated brass body, incorporating a ceramic cartridge headwork with a single lever operating member and incorporating a self-cancelling diverter to a shower outlet with a type HC backflow protection device (verified by test – Suitable for backflow protection against fluid category 3) The spout outlet incorporates a plastic aerator, and the product is supplied with a shower hose and handset. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
0554 Combination Tap Assemblies
Section Subtitle:
Two hole tap(s) with a single outlet and a swivel spout, incorporating a self-cancelling diverter to a shower outlet with a Type HC backflow protection device (verified by test - suitable for backflow protection against Fluid Category 3)
WRAS Approval Number:
260112008
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
Stainless steel braided EPDM lined flexible hose assemblies incorporating ½” BSP (F) captive nut end connections.
Marking:
Gaoao on body.
Installation Requirements:
R001 R030 R040
Expiry date:
31/01/2031
Model:
SA3580

Approval Holder:
ZHEJIANG GAOAO SANITARY WARE CO.,LTD.
Company Name
ZHEJIANG GAOAO SANITARY WARE CO.,LTD.
Address
No.22 Yongda Road, Jiangkou Street, Huangyan District, Taizhou City Zhejiang Province
Postcode
318020
Country
China
General Email
2900324142@qq.com

View All Listings by this Company

Print This Approval


#260115309

Section:
0673 Combination Tap Assemblies
Description:
A Multi-hole tap(s) with a single outlet and a fixed spout, incorporating a manual diverter to a shower outlet.
Deck Mounted Stainless steel braided, EPDM lined interconnecting hoses. Capable of Achieving AUK3 Tap Gap
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Installation Requirements:
R001 R006 R020
Expiry date:
31/01/2031

Product IdentificationSurface Finish / ColourDimensionMax Working Pressure (bar)Max Operating Temp (°C)MarkingMarking locationAll metals in the water pathway are on the 4msi positive listHeadwork for Flow ControlFixing TypeSpout OutletIncludes
F9009K-**VariousBSP 3/4" (M)1085LAN BIAOSpoutNo1/4 Turn ceramic discMetal BacknutsFlow StraightenerInterconnecting Hoses

Notes & Further Information

** denotes finish: No Suffix = Chrome, H = Black, DYB = Matte white, BZ = Perl white painted, HGTS = Red bronze, HTL = Yellow bronze brushed, Q = Bronze, QTSL = Bronze brushed bright, QTS = Bronze brushed matte, STS = Acid copper brushed, SDMGJ = Water plated rose gold, N = Nickel brushed bright light, NP = Nickel brushed, TJ = Titanium gold, TJLS = Titanium gold brushed, G = Gold, GJS = Gold brushed, GJSY = Zirconium gold wire drawing matte, PGJFY = Zirconium gold wire drawing matte bright light, PLSJ = Brushed gold, LSJY = Brushed gold matte, MGJ = Rose gold, MGJL = Rose gold brushed, DMGJ = Light rose gold brushed, HTS = Red bronze brushed, QHP = Grey, LSQH = Grey brushed, LHMGJ = Brushed yellow rose gold.


Approval Holder:
Taizhou Lanbiao Sanitary Ware Co., Ltd
Company Name
Taizhou Lanbiao Sanitary Ware Co., Ltd
Address
XUDOU VILLAGE QINGGANG YUHUAN ZHEJIANG
Postcode
317600
Country
China
Phone
13736601565
General Email
984458082@qq.com

View All Listings by this Company
Manufacturers:
TAIZHOU LANBIAO SANITARY WARE CO., LTD

Print This Approval


#260115310

Section:
1660 Shower Outlets
Description:
A Range of Shower hose(s)
Stainless-steel braided PVC lined shower hose
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Installation Requirements:
R001
Expiry date:
31/01/2031

Product IdentificationSurface Finish / ColourDimensionMax Working Pressure (bar)Max Operating Temp (°C)MarkingMarking locationAll metals in the water pathway are on the 4msi positive listHeadwork for Flow ControlFixing TypeSpout OutletIncludes
H23B1Chrome plated½” BSP (F) conical nut x ½” BSP(F) nutOpen outlet use only65JETOM, WRASFerruleNo
H23GFChrome plated½” BSP (F) conical nut x ½” BSP(F) conical nutOpen outlet use only65JETOM, WRASFerruleNo

Approval Holder:
Quanzhou Jetom Hose Industry Co. Ltd.
Company Name
Quanzhou Jetom Hose Industry Co. Ltd.
Address
High-Tech Industrial Zone, Luncang Town Nan'an City, Quanzhou City, Fujian Province
Postcode
362000
Country
China
Phone
+86 595 68979514
General Email
dingqingfeng@jetom.com.cn

View All Listings by this Company
Manufacturers:
Quanzhou Jetom Hose Industry Co. Ltd.

Print This Approval


#260215305

Section:
1660 Shower Outlets
Description:
A Shower hose(s)
Stainless steel inter-locked shower hose incorporating an PVC lining and EPDM gaskets.
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Installation Requirements:
R001
Expiry date:
28/02/2031

Product IdentificationSurface Finish / ColourDimensionMax Working Pressure (bar)Max Operating Temp (°C)MarkingMarking locationAll metals in the water pathway are on the 4msi positive listHeadwork for Flow ControlFixing TypeSpout OutletIncludes
F2300120012060Chrome plated½” BSP (F) conical nut x ½” BSP(F) nutOpen outlet use only85Justlink WRAS 2025NutNoOpen Outlet

Approval Holder:
Yuhuan Jianglin Plumbing Hose & Parts Inc.
Company Name
Yuhuan Jianglin Plumbing Hose & Parts Inc.
Address
2 Jindifu Road, Yuhuan Economic Development Zone, Yuhuan, Zhejiang, 317600
Country
China
Phone
86-576-89901684
General Email
coo@cnjianglin.com

View All Listings by this Company
Manufacturers:
Yuhuan Jianglin Plumbing Hose & Parts lnc.

Print This Approval


#260108302

Section:
1670 Shower Outlets
Description:
A Shower kit(s)
Wall mounted. Incorporates a check valve cartridge (however the complete assembly has not been tested to demonstrate it provides backflow protection).
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Installation Requirements:
R001 R040
Expiry date:
31/01/2031

Product IdentificationSurface Finish / ColourDimensionMax Working Pressure (bar)Max Operating Temp (°C)MarkingMarking locationAll metals in the water pathway are on the 4msi positive listHeadwork for Flow ControlFixing TypeSpout OutletIncludes
26.658.000ChromeG 1/2" (M)Open Outlet65GroheBodyNo

Approval Holder:
Grohe AG
Company Name
Grohe AG
Address
Industriepark Edelburg Hemer
Postcode
58675
Country
Germany
Phone
02372 930
General Email
marc.engelhardt@lixil.com

View All Listings by this Company
Manufacturers:
Grohe AG

Print This Approval



Back To Directory Sections

Page 788 of 812

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.