'EPW50, EPW55, EPW60, EPW65, EPW70, EPW75 & EPW80'. Black coloured, injection moulded EPDM material. Shore hardness between 50 & 80. Tested in-radius 2.95mm. For use with water up to 65°C.

Section:

5365 Rubbers

Section Subtitle:

Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.

WRAS Approval Number:

250455035

Expiry date:

30/04/2030

Approval Holder:

Harltex Ltd.

Company Name

Harltex Ltd.

Address

Unit 12, Norman-D-Gate Industrial Estate, Northampton

Postcode

NN1 5NT

View All Listings by this Company

'S71U 'O' rings'. Off white coloured (translucent), compression moulded VMQ 'O' rings. Shore hardness 70. Tested in-radius size between 0.89mm & 2.85mm. For use with water up to 85°C.

Section:

5410 Rubbers

Section Subtitle:

Silicone - components.

WRAS Approval Number:

250855002

Expiry date:

31/08/2030

Range of single-hole, multiple outlet, swivel, combination tap assemblies (brass bodies - various finishes, see model) with a pull-out spout. The product is designed to dispense near boiling filtered water or filtered water using a ½ turn ceramic disc headwork, (¼ turn anticlockwise via a spring loaded lever for near boiling water, and ¼ turn clockwise for filtered water). The product also incorporates a ceramic cartridge headwork for hot and cold supplies with a single lever operating member. The pull-out spout incorporates a plastic aerator for the hot and cold water pathway and an integral brass insert for the near boiling/filtered water pathway. Maximum working pressure 8.0 bar. Maximum operating temperatures: 85°C, and 98°C for the near boiling/filtered water pathway (after the boiler).

Section:

0683 Combination Tap Assemblies

Section Subtitle:

Multiple Function tap(s). In addition to normal tap function includes at least one of following functions chilled, filtered, carbonated, instantaneous hot water.

WRAS Approval Number:

250515701

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Note:

The near boiling water heater and filter must be purchased separately and are not covered under the scope of this approval.

Size:

Cold supply: ½” captive nut to tee connector. Hot supply: Stainless steel braided PEX lined flexible inlet hose assembly incorporating a ½” captive nut end connection.

Marking:

Taizhou New Lanbiao Intelligent Technology Co.,Ltd logo (‘NLB’) on body.

Installation Requirements:

R001 R007 R009 R090

Expiry date:

31/05/2030

Proviso:

The near boiling water heater and filter must be purchased separately and are not covered under the scope of this approval.

Model:

14043** & 14043A** ** represent different finishes No suffix: Chrome plated H: Black, N: Nickel brushed, GJS: Zirconium gold brushed, G: Zirconium gold, QTSL: Brushed bronze bright, QTS: Brushed bronze matte, TJ: Titanium gold, TJLS: Titanium gold brushed, MGJ: Rose gold, MGJL: Rose gold brushed, HGT: Red bronze, HTL: Yellow bronze brushed, HTS: Red bronze brushed, PVDQH: Gun grey, HQ: Gun grey brushed, Q: Bronze, DYB: Matte white, STS: Acid copper brushed, BZ: Spray pearl white, DMGJ: Light rose gold brushed.

Product Images

Approval Holder:

Taizhou New Lanbiao Intelligent Technology Co.,Ltd

Company Name

Taizhou New Lanbiao Intelligent Technology Co.,Ltd

Address

JIAOXI INDUSTRIAL ZONE, QINGGANG, YUHUAN, TAIZHOU

Country

China

View All Listings by this Company

Manufacturer:

Taizhou New Lanbiao Intelligent Technology Co.,Ltd

Company Name

Taizhou New Lanbiao Intelligent Technology Co.,Ltd

Address

JIAOXI INDUSTRIAL ZONE, QINGGANG, YUHUAN, TAIZHOU

Country

China

View All Listings by this Company

Bottom entry BS1212-4 (2016) compact type float operated valves for use with WC flushing cisterns. The inlet incorporates a strainer. Maximum working pressure 10.0 bar. Cold water use only.

Section:

2075 Float Operated Inlet Valve

Section Subtitle:

Can be used to achieve a recognised air gap arrangement, providing it meets the appropriate backflow requirements. Suitable for use in a WC suite, provided it forms an arrangement which meets the requirements of Type AUK1 air gap and an appropriate WC performance specification.

WRAS Approval Number:

250104717

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

13½” BSP1/2” (M) Plastic, BSP1/2” (M) Brass 11½” BSP1/2” (M) Plastic, BSP1/2” (M) Brass 10” BSP1/2” (M) Plastic, BSP1/2” (M) Brass

Marking:

Flomasta, BS1212-4 and datum level on body.

Installation Requirements:

R001 R550 R560

Expiry date:

31/01/2030

Model:

50593400659535 & 5059340124025

Approval Holder:

Kingfisher International Products Ltd.

Company Name

Kingfisher International Products Ltd.

Address

1 Paddington Square, London

Postcode

W2 1GG

Phone

07721 260713

General Email

eric.capotummino@kingfisher.com

View All Listings by this Company

Bottom entry BS1212 part 4 (2016) compact type float operated inlet valve for WCs flushing cistern having a plastic body and adjustable float and plastic filter at the inlet. Maximum working pressure 10.0 bar. Cold water use only.

Section:

2075 Float Operated Inlet Valve

Section Subtitle:

Can be used to achieve a recognised air gap arrangement, providing it meets the appropriate backflow requirements. Suitable for use in a WC suite, provided it forms an arrangement which meets the requirements of Type AUK1 air gap and an appropriate WC performance specification.

WRAS Approval Number:

250504705

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” BSP (M)

Marking:

Siamp, BS1212-4, WRAS & manufacturing date clock MM/YY on the float.

Installation Requirements:

R001 R550 R560 R562

Expiry date:

31/05/2030

Model:

Compact 99 Airgap

Manufacturer:

Siamp

Company Name

Siamp

Address

4 Quai Antoine Premier BP 219 MC 98007

Country

Monaco

Phone

Tel: +377 9315 5375 Fax: +377 9205 7104

View All Listings by this Company