Water Regulations Approval Scheme Ltd

Combination Tap Assemblies

Section Code 0470 : Single hole tap(s) with a single outlet and a swivel spout.

WRAS Approval Number: #250704003

Range of single hole, single outlet (swivel) combination tap assemblies with brass bodies (chromium plated), incorporating ceramic cartridge headworks and single lever operating member. The connection to flexible hose and spray outlets incorporates an approved single check valve cartridge (however, the whole product has not been fully tested to demonstrate that it provides adequate backflow protection) the outlets incorporates a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:: 0470 Combination Tap Assemblies
Section Subtitle:: Single hole tap(s) with a single outlet and a swivel spout.
WRAS Approval Number:: 250704003
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: Stainless steel braided EPDM lined hose assembly incorporating ½” captive nut end connections.
Marking:: ELSMBK, ELSMCP, MASMCP, INST-MCF-1HKM, INST-MCP-1HKM, INSMCSKMMB - DTC25 on rear and Methven on front body MDL104 - DTC25 on rear and Deva on front body
Installation Requirements:: R001 R006 R010
Expiry date:: 31/07/2030
Model:: ELSMBK ELSMCP MASMCP INST-MCF-1HKM INST-MCP-1HKM MDL104 Model added June 2025 INSMCSKMMB

Approval Holder:: Methven UK Limited

Company Name
Methven UK Limited
Address
Methven Experience Centre 3-3A Stone Cross Court Yew Tree Way Golborne Warrington
Postcode
WA3 3JE
Country
United Kingdom
Phone
0800 195 1602
General Email
raluca.olariu@uk.methven.com

View All Listings by this Company

WRAS Approval Number: #250708002

Range of single hole, single outlet (swivel) combination tap assemblies incorporating brass bodies (various finishes) and ceramic cartridge headworks with single lever operating members. The spout outlets incorporate plastic aerators. Maximum working pressure 5.0 bar. Maximum operating temperature 65°C.

Section:: 0470 Combination Tap Assemblies
Section Subtitle:: Single hole tap(s) with a single outlet and a swivel spout.
WRAS Approval Number:: 250708002
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: Grey PET braided, PEX lined flexible hose assemblies with ½” BSP captive nut end connections.
Marking:: Manufactures logo on body.
Installation Requirements:: R001 R006 R009 R010
Expiry date:: 31/07/2030
Model:: XX1001YY. XX denotes the trim and can be replaced with: DO – Domo DC – Decca ZU – Zurich Numbers – this is the numerical code allocated to the model and will remain constant. YY denotes the finish and can be replaced with: BN = Brushed Nickel CP = Chrome GM = Gunmetal SB = Stable Brass

Approval Holder:: Davroc Limited

Company Name
Davroc Limited
Postcode
EN11 0QS
Country
United Kingdom
General Email
rob@lefroybrooks.co.uk

View All Listings by this Company

WRAS Approval Number: #250103014

Single-hole, single outlet (swivel) combination tap assembly (chromium plated brass body), incorporating quarter turn ceramic disk headworks with cross top operating members. The spout outlet incorporates a plastic flow straightener. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C

Section:: 0470 Combination Tap Assemblies
Section Subtitle:: Single hole tap(s) with a single outlet and a swivel spout.
WRAS Approval Number:: 250103014
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: Stainless steel braided EPDM lined flexible hose assemblies incorporating ½” BSP captive nut end connections.
Marking:: ‘INFINITA’ on tap body
Installation Requirements:: R001 R006 R010
Expiry date:: 31/01/2030
Model:: INF-LUV-001

Approval Holder:: FORTIS MERCHANTS LTD

Company Name
FORTIS MERCHANTS LTD
Address
SUSSEX HOUSE QUARRY LANE
Postcode
PO19 8PE

View All Listings by this Company

WRAS Approval Number: #240204069

A range of single-hole single outlet swivel combination tap assemblies with brass bodies (chromium plated). Incorporating ceramic cartridge headworks with various operating members. The spout outlets on some models incorporate a plastic aerator. Maximum working pressure - 10 bar. Maximum operating temperature - 60°C.

Section:: 0470 Combination Tap Assemblies
Section Subtitle:: Single hole tap(s) with a single outlet and a swivel spout.
WRAS Approval Number:: 240204069
Size:: Stainless-steel braided PEX lined flexible hose assemblies incorporating ½” BSP captive nut end connections.
Marking:: Bagnodesign on body
Installation Requirements:: R001 R006 R009 R010
Expiry date:: 28/02/2029
Model:: C-LINE SINGLE LEVER KITCHEN SINK MIXER BDM-CLI-361-A-XX PROJECT SINGLE LEVER KITCHEN SINK MIXER (code used for project protection) BDM-PRO-611080-A-XX BDM-PRO-611080-B-XX ‘XX’ denotes finish and is replaced with: Chrome(CP), Brushed Nickel (NB), Matt Black(MB), Anthracite (AN), Gold (GD), PVD Gold (PG), Soft Bronze (SBZ), Santiago (RCP), Oyster (OYS), Burgundy (BUR), Black (MB-C), Cocoa (CO-C), Mandarin (MD-C), Blueberry (BY-C), Lip Gloss (Pink)(LG-C), Sage (SA-C) & Truffle (TF-C)

Approval Holder:: BAGNODESIGN (SANIPEXGROUP)

Company Name
BAGNODESIGN (SANIPEXGROUP)
Address
Unit 1 Oakwell Park Trading Estate Birstall Leeds
Postcode
WF17 9LU
Country
United Kingdom
General Email
dan@sanipexgroup.com

View All Listings by this Company

WRAS Approval Number: #241113018

Range of single hole, single outlet (swivel) combination tap assemblies (chromium plated brass), incorporating ceramic cartridge headworks and single lever operating members. The spout outlet incorporates a plastic aerator. The inlet hose incorporates an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:: 0470 Combination Tap Assemblies
Section Subtitle:: Single hole tap(s) with a single outlet and a swivel spout.
WRAS Approval Number:: 241113018
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: Stainless steel braided EPDM line flexible hose assemblies with 3/8” or ½” captive nut end connections. ASW2 model only - Stainless steel braided PEX line flexible hose assemblies with 3/8” or ½” captive nut end connections.
Marking:: SMR on body.
Installation Requirements:: R001 R009 R010 R006
Expiry date:: 30/11/2029
Model:: ELARA

Approval Holder:: Clearwater Products Ltd

Company Name
Clearwater Products Ltd
Address
Unit 5603 Shannon Place Tewkesbury Place
Postcode
GL20 8SL

View All Listings by this Company
Manufacturer:: San Marco Rubinetteria S.r.l.

Company Name
San Marco Rubinetteria S.r.l.
Address
Via Carducci, 10 Pray
Postcode
13867
Country
Italy
Phone
+39 15765 5244

View All Listings by this Company
Manufacturer:: San Marco Rubinetteria S.r.l.

Company Name
San Marco Rubinetteria S.r.l.
Address
Via Carducci, 10 Pray
Postcode
13867
Country
Italy
Phone
+39 15765 5244

View All Listings by this Company