Directory Search Results

Print List

#2106047

Range OF JLA commercial washing machines with flow controlled by solenoid valve and discharged via a type `AB` airgap (verified by test - suitable for backflow protection against fluid category 5). The products are supplied with three ¾” x ¾” BSP (F) double check valve assemblies (suitable for backflow protection against Fluid Category 3) for installation on each inlet prior to a HDPE inlet hose with ¾” x ¾” captive nut end connections. Maximum working pressure 5.7 Bar. Maximum operating temperature 60°C.

Section:
2370 Washing Machines
Section Subtitle:
Clothes. Washing machines in this section will indicate the category of backflow prevention built into each appliance. The location and the use of the washing machine will determine any additional backflow protection that may be required.
WRAS Approval Number:
2106047
Note:
This appliance incorporates a Fluid Category 5 backflow prevention device. The double check valve assemblies supplied with this product must be installed on all available inlets to maintain the validity of the WRAS approval. No detergents, softeners or other products are to be placed within the dispenser compartment that represent a risk greater than Fluid Category 3.
Size:
¾” BSP (F) (to double check valve assembly)
Marking:
JLA logo, model, serial number, product info on label on back panel.
Installation Requirements:
R001 R160 R574
Expiry date:
30/06/2026
Model:
JLA20 JLA30 JLA40 JLA60
Product Images

Approval Holder:
JLA Ltd
Company Name
JLA Ltd
Address
Meadowcroft Lane Ripponden West Yorkshire
Postcode
HX6 4AJ
Country
Ripponden

View All Listings by this Company

Print This Approval


#2107123

Range of commercial dishwashers with flow controlled by a solenoid valve and discharged via a type AB air gap (verified by test - suitable for backflow protection against fluid category 5). Maximum working pressure 4.0 bar. Cold water use only.

Section:
2390 Washing Machines
Section Subtitle:
Dish. Washing machines in this section will indicate the category of backflow prevention built into each appliance. The location and the use of the washing machine will determine any additional backflow protection that may be required.
WRAS Approval Number:
2107123
Size:
¾” BSP (F)
Marking:
Maidaid on front panel. Maidaid, model, serial number, date of manufacture (DD/MM/YYYY) and other product info on label on side panel.
Installation Requirements:
R001 R574
Expiry date:
31/07/2026
Model:
C525WS, C615WS, C2035WS, 525GS, 215GS, D525WS, EVOLUTION 425WS, EVOLUTION 525WS, EVOLUTION 535WS, EVOLUTION 2135WS, EVOLUTION 3135WS, AM H55WS & AM H95WS COMMERCIAL DISHWASHERS

Approval Holder:
Maidaid Halcyon
Company Name
Maidaid Halcyon
Address
The Engine Shed Top Station Road Brackley
Postcode
NN13 7UG
Country
Northants
Phone
+44 (0) 1280 845300
General Email
sales@maidaid-halcyon.co.uk

View All Listings by this Company

Print This Approval


#2109354

Range of commercial front loading, hood type & utensil washer type dishwashing machines with flow controlled by solenoid and discharged via type AB air gap (verified by test - suitable for backflow protection against fluid category 5) . The products are supplied with a grey coloured PVC supply hose. Maximum working pressure 6.0 bar. Maximum operating temperature 90°C.

Section:
2390 Washing Machines
Section Subtitle:
Dish. Washing machines in this section will indicate the category of backflow prevention built into each appliance. The location and the use of the washing machine will determine any additional backflow protection that may be required.
WRAS Approval Number:
2109354
Size:
¾” BSP Captive nut.
Marking:
Hobart, manufacturers address, model no, serial no and other technical information on front casing.
Installation Requirements:
R001 R009 R520 R574
Expiry date:
30/09/2026
Model:
Frond loading: Design State: FG-16-01 Device Code: G404W-12B, G404SW-12B, G504W-10B, G504SW-10B, F504W-20B, F504SW-20B Design State: GCB-13-04 Device Code: ECO+G415W-10C, ECO+G415SW-10C Design State: GC-18-01 Device Code: GCW-10B, GCSW-20B, GCROIW-10B, GCPW-10B, GCPROIW-10B, GPW-10B, GPSW-10B, GPCROIW-10B Design State: FXB-12-04 Device Code: ECO+G515W-10C, ECO+G515SW-10C, ECO+F515W-10C, ECO+F515SW-10C Design State: FX-18-01 Device Code: FXW-10B, FXSW-10B, FXLW-10B, FXLSW-10B, FXSTDW-10B, careSW-10B, FPW-10B, FPSW-10B, GXCW-11B, GXCSW-11B, GXCROIW-11B, GXW-11B, GXSW-11B Hood type: Design State: AM-14-02 Device Code: H604W-12B, H604SW-12B Design State: AMB-14-03 Device Code: ECO+H615W-10C, ECO+H615SW-10C Design State: AMX-14-02 Device Code: AM900W-10B, AM900SW-10B, , AMXW-10B, AMXSW-10B ,AMXRW-10B, AMXRSW-10B, AMXXW-10B, AMXXSW-10B, AMXXRW-10B, AMXXRSW-10B, AUPW-10B, AUPSW-10B, AUPRSW-10B, AMXTW-10B, AUPTW-10B, AMXXLW-10B, AMXXLSW-10B, AUPLW-10B, AUPLSW-10B, Design State: TLW-18-01: Device Code: TLWW-10A, TLWSW-10A Utensil washer: Design State: UX-15-01 Device Code: UX-10A, UXS-10A, UXC-10A, UXCS-10A, UXRC-10A, UXRCS-10A, UXT-10A, UXTC-10A, UXTRC-10A, UXTH-10A, UXTLH-10A, UXTHR-10A, UXTLHR-10A, UP-10A, UPC-10A, UPRC-10A, UPT-10A, UPTC-10A, UPTRC-10A Design State: U-15-01 Device Code: ECOMAX702-11A, ECOMAX702W-11A Models added June 2022: Frond loading Design State: FXB-12-04 Device Code: FXBSW-10C, FXBSW-15C, FXBW-10C, FXLBSW-10C, GXBSW-11C, GXCBSW-11C Hood type Design State: AMB-14-03 Device Code: AMXBSW-10C, AMXBW-10C, AMXXBRSW-10C Utensil washer Design State: UXB-15-01 Device Code: UXB-10C, UXBS-10C, UXTB-10C, UXTHB-10C, UXTLHB-10C Explanation: “Design State” defines the type of Machine and the Production-Generation “Device Code” defines the Order Code for a special equipped machine

Approval Holder:
Hobart GmbH
Company Name
Hobart GmbH
Address
Robert-Bosch-Str. 17 77656 Offenburg
Country
Germany
Phone
+49 781 600-0
General Email
info@hobart.de

View All Listings by this Company
Manufacturer:
Hobart GmbH
Company Name
Hobart GmbH
Address
Robert-Bosch-Str. 17 77656 Offenburg
Country
Germany
Phone
+49 781 600-0
General Email
info@hobart.de

View All Listings by this Company

Print This Approval


#2107005

Range of electrolytic scale inhibitors incorporating copper bodies. For use with copper pipe complying with BS EN 1057. Maximum working pressure 10.0 bar. Maximum operating temperature 40°C.

Section:
2410 Water conditioners, de-scalers, phosphate dosing, magnetic, electrolytic and electronic
Size:
Please refer to model.
Marking:
GAOBO and WRAS on body.
Installation Requirements:
R001 R120 R150 R170 R290
Expiry date:
31/07/2026
Model:
7568230011: 15mm push-fit. 7568260011: 15mm push-fit. 7568320011: 15mm push-fit. 7568192211: 15mm compression. 7568156211: 22mm compression. 7568202211: 14.7mm compression. 7568175211: 21.15mm compression.

Approval Holder:
Zhejiang Gaobo Sanitary Wares Co Ltd
Company Name
Zhejiang Gaobo Sanitary Wares Co Ltd
Address
Xiaqiu, Yuhuan Sci-Tech Industrial Area, Zhejiang
Country
China

View All Listings by this Company
Manufacturer:
Zhejiang Gaobo Sanitary Wares Co Ltd
Company Name
Zhejiang Gaobo Sanitary Wares Co Ltd
Address
Xiaqiu, Yuhuan Sci-Tech Industrial Area, Zhejiang
Country
China

View All Listings by this Company

Print This Approval


#2109335

Range of UV disinfection units with stainless steel and EPDM seals. The UV lamps are housed inside synthetic quartz tubes Maximum working pressure 6.9 bar. Cold water use only.

Section:
2411 Disinfection Equipment
Size:
see model
Marking:
Acuva logo, Acuva Technologies Inc. model, date of manufacture (YYWW) and technical info on body.
Installation Requirements:
R001 R120 R150 R170 R290
Expiry date:
30/09/2026
Model:
Strike I: 3/8” pushfit inlet x ¼” pushfit outlet. Strike II: ¼” pushfit inlet & outlet.

Approval Holder:
Acuva Technologies Inc.
Company Name
Acuva Technologies Inc.
Address
UNIT 1-3771 NORTH FRASER WAY BURNABY BCV5J 5G5
Country
Canada
General Email
eespida@acuvatech.com

View All Listings by this Company
Manufacturer:
Acuva Technologies Inc.
Company Name
Acuva Technologies Inc.
Address
UNIT 1-3771 NORTH FRASER WAY BURNABY BCV5J 5G5
Country
Canada
General Email
eespida@acuvatech.com

View All Listings by this Company

Print This Approval


#2107568

'Droople DRP-M90-IMP'. White coloured, injection moulded acetal cogwheel. For use with water up to 65°C.

Section:
5010 Acetal (Components)
Expiry date:
31/07/2026

Approval Holder:
Droople SA
Company Name
Droople SA
Address
Route du Verney 18, 1070 Puidoux
Country
Switzerland

View All Listings by this Company

Print This Approval


#2109506

'KEPITAL F20-03 BKM'. Black coloured, injection moulded POM material. For use with water up to 85°C.

Section:
5015 Acetal
Section Subtitle:
Material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2109506
Expiry date:
30/09/2026

Approval Holder:
Korea Engineering Plastics Co. Ltd.
Company Name
Korea Engineering Plastics Co. Ltd.
Address
84, Jangsaengpo gorae-ro, Nam-Gu, Ulsan, 44781
Country
Korea, Republic of

View All Listings by this Company

Print This Approval


#2109520

'CarSIK-NT'. Grey coloured, RBSiC/SiSiC Reaction Bonded Silicon Carbide washer/seal ring, manufactured by isostatic pressing. For use with water up to 80°C.

Section:
5023 Ceramic
Expiry date:
30/09/2026

Approval Holder:
Schunk Ingenieurkeramik GmbH
Company Name
Schunk Ingenieurkeramik GmbH
Address
Hanns-Martin-Schleyer-Str. 5, D47877 Willich
Country
Germany
Phone
+49 (0) 2154 497-0
General Email
infobox@schunk-group.com

View All Listings by this Company

Print This Approval


#2109528

'SC35'. Grey coloured, SiC washer manufactured by pressing, firing and finishing. For use with water up to 85°C.

Section:
5023 Ceramic
Expiry date:
30/09/2026

Approval Holder:
CoorsTek GmbH Zweigniederlassung Moenchengladbach
Company Name
CoorsTek GmbH Zweigniederlassung Moenchengladbach
Address
Nobelstrasse 6, D-41189 Moenchengladbach
Country
Germany

View All Listings by this Company

Print This Approval


#2109542

'PS5000 Seal'. Grey coloured, compression moulded silicon carbide seal. For use with water up to 85°C.

Section:
5023 Ceramic
Expiry date:
30/09/2026

Approval Holder:
Morgan Advanced Materials
Company Name
Morgan Advanced Materials
Address
Morgan Drive, Stourport on Severn
Postcode
DY13 8DW

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 78 of 320

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.