Directory Search Results

Print List

#240604019

Range of wall mounted shower outlets (chrome plated or white finish). Products either incorporate a filter or a dummy unit for the insertion of a filter. Models 02-092034, 02-092039, 02-803150 & 02-092031 incorporate an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum operating temperature 60°C

Section:
1650 Shower Outlets
Section Subtitle:
Shower head(s) and/or shower handset(s).
WRAS Approval Number:
240604019
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Note:
Open outlet use only. R150 & R170 applies to models with a filter and dummy models when a filter is installed. These products fall under the scope of the GB Biocidal Products Regulations.
Size:
½” BSP (F), 1¼” BSP (M), 58mm M3, 14mm pushfit, 18.5mm pushfit. Sizes added November 24: M28 X M30 (Adaptor) .
Marking:
T-Safe on body
Installation Requirements:
R001 R150 R170 R040
Expiry date:
30/06/2029
Model:
02-092034 Medical Fixed shower filter. 02-092039 Fixed Position 92 day Shower. 02-803150 Chrome Wall shower filter. 02-803170 Flex wall shower filter. 02-009612 Shower arm f. Easy fix. 02-009613 Shower arm f. Easy-Fix. 01-990284 Adaptor. Models added October 2024: 02-092031 Easy-Fix Shower Filter Models added November 24: 02-092040 Medical Birthing Pool Filter Models added November 25: 02-092041 Medical Birthing Pool Filter 92 days M24

Approval Holder:
T-safe A/S
Company Name
T-safe A/S
Address
Gydevang 1, Alleroed
Postcode
3450
Country
Denmark
Phone
+45 61610518
General Email
moj@t-safe.com

View All Listings by this Company
Manufacturer:
T-safe A/S
Company Name
T-safe A/S
Address
Gydevang 1, Alleroed
Postcode
3450
Country
Denmark
Phone
+45 61610518
General Email
moj@t-safe.com

View All Listings by this Company

Print This Approval


#23113748

Overhead ceiling or wall mounted (depending on shower arm) shower outlet with chrome plated plastic body, EPDM o-rings and a plastic flow restrictor at the ball joint. Maximum working pressure: Open outlet. Maximum operating temperature: 60°C.

Section:
1650 Shower Outlets
Section Subtitle:
Shower head(s) and/or shower handset(s).
WRAS Approval Number:
23113748
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
½” BSP (M) – inlet to shower arm. ½” BSP (M) – inlet to showerhead.
Marking:
Grohe logo on shower outlet.
Installation Requirements:
R001 R010
Expiry date:
30/11/2028
Model:
26.054 Rainshower Allure 230. The showerhead can be installed together with either of the following shower arms: 27.709 Rainshower Grohe shower arm (wall), 27.711 Rainshower Grohe shower arm (ceiling).

Approval Holder:
Grohe AG
Company Name
Grohe AG
Address
Industriepark Edelburg Hemer
Postcode
58675
Country
Germany
Phone
02372 930
General Email
marc.engelhardt@lixil.com

View All Listings by this Company
Manufacturer:
Grohe AG
Company Name
Grohe AG
Address
Industriepark Edelburg Hemer
Postcode
58675
Country
Germany
Phone
02372 930
General Email
marc.engelhardt@lixil.com

View All Listings by this Company

Print This Approval


#240902003

Range of overhead shower outlets, (brass bodies - various finishes. The inlets incorporate combined EPDM washers and stainless-steel strainers. Open outlet use only Maximum operating temperature 60°C

Section:
1650 Shower Outlets
Section Subtitle:
Shower head(s) and/or shower handset(s).
WRAS Approval Number:
240902003
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Note:
Model 27 607 xx0 is supplied with a shower arm Model 27 620 xx0 is supplied with a ceiling connector
Size:
1/2" BSP (M)
Marking:
Hansgrohe on body
Installation Requirements:
R001 R040
Expiry date:
30/09/2029
Model:
27 607 xx0 27 620 xx0 27 623 xx0 Models added February 2025: 27 624 xx0 & 28 821 xx0. Models added September 2025: 33 291 7xx & 32 291 7xx. Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.

Approval Holder:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Country
Germany
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Print This Approval


#240902035

Range of shower handsets with brass bodies (various finishes). The inlets incorporate a plastic flow regulator and an approved single check valve cartridge however the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum operating temperature 85°C.

Section:
1650 Shower Outlets
Section Subtitle:
Shower head(s) and/or shower handset(s).
WRAS Approval Number:
240902035
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Note:
Open outlet use only.
Size:
½” BSP (M)
Marking:
SHS on handset
Installation Requirements:
R001 R040
Expiry date:
30/09/2029
Model:
V654W-XX V654WB-XX V254W-YY-XX V255W-YY-XX V256W-YY-XX Where the product code suffix ‘XX’ denotes the surface finish. It will always be 2 or 3 digits, which can be any combination of numbers and/or letters. As examples: CP = chrome finish, URM = urban brass matt lacquered.

Approval Holder:
Samuel Heath & Sons Plc
Company Name
Samuel Heath & Sons Plc
Address
100 Leopold Street Birmingham
Postcode
B12 0UJ
Country
United Kingdom
Phone
+44 (0) 1217 662 200
General Email
kay.stead@samuel-heath.com

View All Listings by this Company
Manufacturer:
Samuel Heath & Sons Plc
Company Name
Samuel Heath & Sons Plc
Address
100 Leopold Street Birmingham
Postcode
B12 0UJ
Country
United Kingdom
Phone
+44 (0) 1217 662 200
General Email
kay.stead@samuel-heath.com

View All Listings by this Company

Print This Approval


#240704049

Range of in-line Y patterned strainers with bronze bodies and a stainless steel mesh strainer. Maximum working pressure 20.0 bar. Maximum operating temperature 85°C

Section:
1715 Strainers
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
DN 15, DN 20, DN 25, DN 32, DN 40, DN 50.
Marking:
Herz logo, Bronze, Austria, Flow arrow,size, Pressure rating.
Installation Requirements:
R001
Expiry date:
31/07/2029
Model:
3 2662 01 ½”BSP (F) x ½”BSP (F), 3 2662 02 ¾” BSP (F) x ¾” BSP (F), 3 2662 03 1” BSP (F) x 1 BSP (F), 3 2662 04 1¼” BSP (F) x 1 ¼” (F), 3 2662 05 1 ½” BSP (F) x 1 ½” (F), 3 2662 06 2” BSP (F) x 2 BSP (F).

Approval Holder:
Herz Armaturen GmbH
Company Name
Herz Armaturen GmbH
Address
Richard - Strauss Strasse 22, A-1230, Vienna
Country
Austria

View All Listings by this Company
Manufacturer:
Herz Armaturen GmbH
Company Name
Herz Armaturen GmbH
Address
Richard - Strauss Strasse 22, A-1230, Vienna
Country
Austria

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 769 of 1307

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.