'Titan A202'. Site applied, pale yellow coloured hydrophilic polyurethane foam. Apply as per manufacturer's Tech Sheet '03', dated '10.01.2023' and spray treated surface with water. Cure for 6 hours at an ambient temperature (19-21°C). For use with water up to 23°C. This material is only approved for the curing conditions that appear on the approval. If the cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:

5308 Repair Material

Expiry date:

31/05/2028

Approval Holder:

Metalyte Pipeworks (IMG Ltd).

Company Name

Metalyte Pipeworks (IMG Ltd).

Address

The Industrial Maintenance Group Ltd. Unit M, Riverside Industrial Estate, Fazeley, Tamworth

Postcode

B78 3RW

View All Listings by this Company

‘Sunaflex T 9635’. Black coloured, compression moulded EPDM material. Shore hardness 70. Tested in-radius size 1.0mm. Between March 2023 and August 2023, the material was for use with water up to 23°C. Between September 2023 and March 2028, the material is for use with water up to 80°C.

Section:

5365 Rubbers

Section Subtitle:

Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.

WRAS Approval Number:

2303545

Expiry date:

31/03/2028

Approval Holder:

Compounds AG

Company Name

Compounds AG

Address

Barzloostrasse 1, 8330 Pfaffiken ZH, Switzerland

Phone

+41 44 953 34 36

General Email

info@compounds.ch

View All Listings by this Company

'EPNER-4665'. Black coloured, compression moulded EPDM material. Shore hardness 50. Tested in-radius size 1.0mm. For use with water up to 50°C.

Section:

5365 Rubbers

Section Subtitle:

Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.

WRAS Approval Number:

2303547

Expiry date:

31/03/2028

Approval Holder:

National Engineering Industries Ltd. (Rubber Division)

Company Name

National Engineering Industries Ltd. (Rubber Division)

Address

2 Beerpara Lane, Dum Dum, Kolkata 700030

Country

India

View All Listings by this Company

‘N5118F, N5518F, N6118F, N6518F, N7118F, N7008F, N7518F, N8118F, N8518F & N9118F’. Black coloured, compression moulded NBR rubber `O` rings and gaskets. Shore hardness between 50 & 90. 'O' rings have a tested in-radius size of between 0.25mm & 5.0 mm. Gaskets have a tested in-radius size of between 0.3mm & 7.5mm. For use with water up to 85°C.

Section:

5390 Rubbers

Section Subtitle:

Nitrile (Acrylonitrile Butadiene) - components.

WRAS Approval Number:

2306504

Expiry date:

30/06/2028

Approval Holder:

Xiamen Maifeng Seal Products Co., Ltd.

Company Name

Xiamen Maifeng Seal Products Co., Ltd.

Address

No.2288 Tongan Road, Tongan Region, Xiamen City, 361100

Country

China

Phone

+86 592 7111415

General Email

wjm@xmmfc.com

View All Listings by this Company

‘2061 VMQ 60’, red coloured, injection moulded silicone rubber 'O' rings, washers and lip seals with a shore hardness of 60. ‘2172 VMQ 70’, blue coloured, injection moulded silicone rubber 'O' rings, washers and lip seals with a shore hardness of 70. O-rings have a tested in-radius of 2.0mm Washers have a tested in-radius of 2.5mm. Lip seals have a tested in-radius of 0.45mm For use with water up to 85°C.

Section:

5410 Rubbers

Section Subtitle:

Silicone - components.

WRAS Approval Number:

2307504

Expiry date:

31/07/2028

Approval Holder:

Ar-tex SpA

Company Name

Ar-tex SpA

Address

Via Rasetti 12 24060 Viadanica Bergamo

Country

Italy

Phone

+39 035 939 711

General Email

info@ar-tex.it

View All Listings by this Company