Directory Search Results

Print List

#2305530

‘YH001 (natural) & YH002 (grey)’. Natural (appears white coloured) and grey coloured, compression moulded silicone rubber materials. Shore hardness 50. Tested in-radius size 1.0mm. For use with water up to 85°C.

Section:
5415 Rubbers
Section Subtitle:
Silicone - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2305530
Expiry date:
31/05/2028

Approval Holder:
Kaiping City Shuikou Town Yihui Rubber Factory
Company Name
Kaiping City Shuikou Town Yihui Rubber Factory
Address
3 of No. 89 Songshan Industrial Park, Pancun Shuikou Town, Kaiping City
Country
China

View All Listings by this Company

Print This Approval


#2305511

'EMS Force 5543'. 'EMS Force 5543-P' was added to the approval in February 2025. Blue coloured pipe sealants. Apply as per manufacturer's instructions 'TLM.LB.07', version '0', issue date '07/03/2016'. Cure for 24 hours@23°C. For use with water up to 85°C. This material is only approved for the curing conditions that appear on the approval. If the cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:
5510 Sealants - Screwed Joints
Section Subtitle:
General.
WRAS Approval Number:
2305511
Expiry date:
31/05/2028

Approval Holder:
METSAN Endüstriyel Yapıştırıcılar Ticaret A.Ş
Company Name
METSAN Endüstriyel Yapıştırıcılar Ticaret A.Ş
Address
Birlik Organize Sanayi Bölgesi, Batı Caddesi, 1.Sokak No:1 Tuzla/ İstanbul
Country
Turkey

View All Listings by this Company

Print This Approval


#2305515

'THAT RAPID BLU-STUFF'. 'THAT RAPID BLU-GEL' was added to the approval in February 2025. Blue coloured pipe sealants. Apply as per manufacturer's instructions 'TLM.LB.07', version '0', issue date '18/05/2023'. Cure for 24 hours@23°C. For use with water up to 85°C. This material is only approved for the curing conditions that appear on the approval. If the cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:
5510 Sealants - Screwed Joints
Section Subtitle:
General.
WRAS Approval Number:
2305515
Expiry date:
31/05/2028

Approval Holder:
Todays Tools Ltd.
Company Name
Todays Tools Ltd.
Address
57 - 63 Winpenny Road, Parkhouse Industrial Estate East, Newcastle Under Lyme, Staffs.
Postcode
ST5 7RH

View All Listings by this Company

Print This Approval


#2305303

Range of wall mounted, electronically operated, combination tap assemblies (stainless steel body, various finishes - see model), comprising of a Premix control unit and a spout. The flow is controlled by a solenoid valve, (Premix control unit), which is actuated via an infrared sensor. The central section of the valve incorporates a plastic strainer. Both inlets of the Premix control unit incorporate an approved single check valve cartridge, however the complete assembly has not been tested for backflow protection. The spout outlet incorporates a plastic aerator. Maximum working pressure 8.0 bar. Maximum operating temperature 60°C.

Non-metallic materials and components comply with BS6920 at 60°C

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Tap(s) with a non-touch methods of flow control and a single inlet.
WRAS Approval Number:
2305303
Note:
This product may not comply with the requirements of regulation 4(1)(b). Consult your local water undertaker prior to installation. R008 applies to the Premix control unit. The product is not supplied with any connecting hoses/pipework between the Premix control unit and the spout.
Size:
½” BSP (M) (to hot and cold inlets of solenoid).
Marking:
QTOO (brand of D Line) on spout trim.
Installation Requirements:
R001 R008 R010 R040 R570
Expiry date:
31/05/2028
Model:
QST3190xxx (190mm spout), QST3290xxx (250mm spout). Where xxx denotes the surface finish (which is a non-water contact part). It can be 1 to 3 digits, which can be any combination of numbers and/or letters. As examples: M = brushed stainless steel finish, PP1 = polished PVD gunmetal finish.

Approval Holder:
D Line
Company Name
D Line
Address
Jylingevej 59, kld Copenhagen
Postcode
2720
Country
Denmark
Phone
+4572170138
General Email
rik@dline.com

View All Listings by this Company

Print This Approval


#2206068

Bottom entry BS1212-4 (2016) compact type float operated valve for WC flushing cisterns. The inlet incorporates a flow restrictor. Maximum working pressure 10.0 bar. Cold water only

Section:
2075 Float Operated Inlet Valve
Section Subtitle:
Can be used to achieve a recognised air gap arrangement, providing it meets the appropriate backflow requirements. Suitable for use in a WC suite, provided it forms an arrangement which meets the requirements of Type AUK1 air gap and an appropriate WC performance specification.
WRAS Approval Number:
2206068
Size:
½” BSP (M)
Marking:
Ideal Standard, Model number and BS1212-4 on body
Installation Requirements:
R001 R550 R560 R562
Expiry date:
30/06/2027
Model:
EEM90030079, EEM83250067 & EV97967 F

Approval Holder:
Ideal Standard (UK) Ltd
Company Name
Ideal Standard (UK) Ltd
Address
Old Road (Lodge 1) Armitage, Rugeley, Staffordshire
Postcode
WS15 4BT
Country
United Kingdom
General Email
tyeomans@idealstandard.co.uk

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 737 of 2086

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.