Range of double regulating valves with bronze bodies, DZR brass discs, EPDM `O`-rings and PTFE disc face. The valves incorporate a non-rising spindle headwork regulating the flow and isolation function. The D931, D933 and D934 models incorporate two pressure test points. Maximum working pressure 25.0 bar. Maximum operating temperature 85°C.

Section:

2348 Valves

Section Subtitle:

Balancing.

WRAS Approval Number:

250508001

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

D921: ½” - 2” BSP (F x F), D921.AT: ½” - 2” NPT (F x F), D923 (Low flow): ½” BSP (F x F), D923.AT (Low flow): ½” NPT (F x F), D931: ½” - 2” BSP (F x F), D931.AT: ½” - 2” NPT (F x F), D933 (Low flow): ½” BSP (F x F), D933.AT (Low flow): ½” NPT (F x F), D934 (Ultra low flow): ½” BSP (F x F), D934.AT (Ultra low flow): ½” NPT (F x F).

Marking:

Crane, size, PN and flow arrow on body. Crane and model no. on handwheel.

Installation Requirements:

R001

Expiry date:

31/05/2030

Model:

D921, D921.AT, D923 (Low flow), D923.AT (Low flow), D931, D931.AT, D933 (Low flow), D933.AT (Low flow), D934 (Ultra low flow), D934.AT (Ultra low flow).

Product Images

Approval Holder:

Crane Ltd

Company Name

Crane Ltd

Address

Crane House, Epsilon Terrace, West Road, Ipswich

Postcode

IP3 9FJ

Country

United Kingdom

Phone

01473 277 364

General Email

tturner@cranebsu.com

View All Listings by this Company

Range of UV disinfection units with stainless steel bodies. Maximum working pressure 10.0 bar. Cold water use only.

Section:

2411 Disinfection Equipment

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Marking:

Sita, model, size, pressure and product info on label.

Installation Requirements:

R001 R120 R150 R170

Expiry date:

31/03/2030

Model:

AL-AL2 Series UV 107 UV 403 UV 405 UV 405C UV 412 UV 440 LCD Series UV 405 LCD UV 405 LCD PLUS UV 412 LCD UV 412 LCD PLUS UV 440 LCD UV 440 LCD PLUS UV 450 LCD UV 480 LCD UV 480 LCD PLUS UV 550 LCD UV 550 LCD PLUS UV 80/2 LCD UV 80/2 LCD PLUS RACK LCD Series UV 80/3 RACK LCD UV 80/3 RACK LCD PLUS UV 80/4 RACK LCD UV 80/4 RACK LCD PLUS UV 80/5 RACK LCD UV 80/5 RACK LCD PLUS AM Series UV AM 24 UV AM 24 PLUS UV AM 50 UV AM 50 PLUS UV AM 60 UV AM 60 PLUS UV AM 96 PLUS UV AM 125 PLUS UV AM 160 PLUS IT Series UV 4 IT (PLUS) UV 10 IT (PLUS) UV 40 IT (PLUS) UV 80 IT (PLUS) 440 Series UV 440/1 (ST/ECO) (PLUS) UV 440/2 (ST/ECO) (PLUS) UV 440/3 (ST/ECO) (PLUS) UV 440/4 (ST/ECO) (PLUS) UV 440/5 (ST/ECO) (PLUS) UV 440/6 (ST) (PLUS) UV 440/8 (ST) (PLUS)

Product Images

Approval Holder:

SITA S.r.l.

Company Name

SITA S.r.l.

Address

Via Rivarolo 61, 16161 Genova, Italy

View All Listings by this Company

Manufacturer:

SITA S.r.l.

Company Name

SITA S.r.l.

Address

Via Rivarolo 61, 16161 Genova, Italy

View All Listings by this Company

'PA6059 Pure Polyester Powder Coating'. Factory applied, blue coloured polyester coating. Apply as per manufacturer's instructions 'file no. FP180515 version 2' dated May 25, 2018. Cure for 15 minutes@200°C. For use with water up to 23°C. This material is only approved for the curing conditions that appear on the approval. If the cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:

5030 Coatings, Paints & Linings

Section Subtitle:

Factory applied pipe & fittings coatings.

WRAS Approval Number:

250255034

Expiry date:

28/02/2030

Approval Holder:

Sivo (Hubei) Polymer Co., Ltd.

Company Name

Sivo (Hubei) Polymer Co., Ltd.

Address

Room 901, Nanyuan Science & Tech. Park, Dongshan Development Zone, Yichang, Hubei

Country

China

View All Listings by this Company

'Jotapipe AC - 1003 Blue and Jotapipe AC - 1003 Green'. Factory applied, blue or green coloured fusion bonded epoxy coatings (manufactured in Dubai, U.A.E). Apply as per manufacturer's Technical Data Sheet dated 26th September 2019. Cure for 2 minutes@245°C. The blue coating is for use with water up to 85°C. The green coating is for use with water up to 23°C. If the curing conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:

5030 Coatings, Paints & Linings

Section Subtitle:

Factory applied pipe & fittings coatings.

WRAS Approval Number:

250355032

Expiry date:

31/03/2030

Approval Holder:

Jotun Powder Coatings UAE L.L.C

Company Name

Jotun Powder Coatings UAE L.L.C

Address

P.O. Box 51033, Dubai

Country

United Arab Emirates

View All Listings by this Company

'MAVM554'. Factory applied, blue coloured, epoxy powder coating. Apply as per manufacturer's data sheet 'FR.07.03.18', dated 09.19. Cure for 10 minutes at 160°C. For use with water up to 85°C. This material is only approved for the curing conditions that appear on the approval. If the cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:

5030 Coatings, Paints & Linings

Section Subtitle:

Factory applied pipe & fittings coatings.

WRAS Approval Number:

250355041

Expiry date:

31/03/2030

Approval Holder:

PULVER KİMYA SAN. VE TİC. A.Ş.

Company Name

PULVER KİMYA SAN. VE TİC. A.Ş.

Address

GOSB Tembelova Alanı, 3200 Sokak No:,3201, Gebze, 41400 Kocaeli

Country

Turkey

View All Listings by this Company