Range of in-line adjustable pressure reducing valves, with DZR brass bodies and EPDM membrane. Maximum inlet supply pressure 16.0 bar. Outlet pressure 1.5 bar to 6.0 bar.

Non-metallic materials and components comply with BS6920 at 80°C

Section:

2200 Valves

Section Subtitle:

Pressure reducing.

WRAS Approval Number:

2305801

Size:

see model

Marking:

Resideo, date of manufacture YYWW and WRAS on label Flow arrow, size, and DR on body

Installation Requirements:

R001 R120

Expiry date:

31/05/2028

Model:

D05FT-11/4AGB 1 ¼” BSP male D05FT-11/2AGB 1 ½” BSP male D05FT- 2AGB 2” BSP male D05FT-1/2CGB 15mm compression D05FT-3/4CGB 22mm compression

Approval Holder:

Pittway Sarl

Company Name

Pittway Sarl

Address

A3 - ZA La Pièce 6 1180 Rolle

Country

Switzerland

View All Listings by this Company

Range of in-line, adjustable pressure reducing valves, with a DZR brass body. The product incorporates two approved check valve cartridges, verified by test (suitable for backflow protection against Fluid Category 3) and a shut off valve. Maximum working pressure 16 Bar Maximum outlet pressure between 1.5 bar and 6.0 bar.

Non-metallic materials and components comply with BS6920 at 40°C

Section:

2200 Valves

Section Subtitle:

Pressure reducing.

WRAS Approval Number:

2307057

Size:

1/2" BSP (M) inlet x 3/4" BSP (M) or 1/2" BSP (F) outlet

Marking:

Pittway Sarl logo, size, PN, Wras, Flow arrow, temperature, DR and date of manufacture (YYMM) on body

Installation Requirements:

R001

Expiry date:

31/12/2028

Model:

BG04M-1/2 AN

Approval Holder:

Pittway Sarl

Company Name

Pittway Sarl

Address

A3 - ZA La Pièce 6 1180 Rolle

Country

Switzerland

View All Listings by this Company

Range of pressure reducing valves with DZR brass bodies. The valves are adjustable in the range of 1.5 bar - 6.0 bar. Stainless steel strainer Maximum working pressure 16.0 bar. Maximum operating temperature 80°C.

Section:

2200 Valves

Section Subtitle:

Pressure reducing.

WRAS Approval Number:

2307349

Size:

½” BSP (M), ¾ BSP (M) & 1” BSP (M).

Marking:

Resideo (brand of Pittway Sarl), model, date of manufacture (YYWW) & other information on adhesive label on body. Flow arrow and DR on body.

Installation Requirements:

R001 R120

Expiry date:

31/07/2028

Model:

D05FT-1/2AGB (DN15). D05FT-3/4AGB (DN20). D05FT-1AGB (DN25).

Approval Holder:

Pittway Sarl

Company Name

Pittway Sarl

Address

A3 - ZA La Pièce 6 1180 Rolle

Country

Switzerland

View All Listings by this Company

Range of core manifolds (DZR brass body) incorporating a pressure relief valve (plastic body), with an EPDM diaphragm and ‘O’-rings. For use with copper pipe (manufactured to BS EN 1057). The pressure relief valve is pre-set at 6.0 or 8.0 bar (see models). The product incorporates a check valve cartridge, verified by test (suitable for backflow protection against Fluid Category 2). Maximum operating pressure 16.0bar. Cold water use only.

Section:

2210 Valves

Section Subtitle:

Pressure relief.

WRAS Approval Number:

2212035

Size:

28mm compression inlet and outlet on valve body. 22mm compression outlet on PRV.

Marking:

RWC, SYR, DR and flow arrows on manifold. SYR and flow arrow on pressure relief valve. Reliance Water Controls and pressure on pressure relief valve cap.

Installation Requirements:

R001 R120

Expiry date:

31/12/2027

Model:

CORE255003 (6.0 bar pressure relief valve), CORE255004 (8.0 bar pressure relief valve).

Approval Holder:

Reliance Worldwide Corporation (UK)

Company Name

Reliance Worldwide Corporation (UK)

Address

Horton Road, West Drayton

Postcode

UB7 8JL

Country

United Kingdom

Phone

+44 7730 052060

General Email

PETER.LANCASTER@RWC.COM

View All Listings by this Company

Range of solenoid valves with plastic bodies and EPDM rubber diaphragms. The inlet incorporates an inner and outer plastic strainer, EPDM washer and a plastic flow regulator. Maximum working pressure 10.0 bar. Cold water use only.

Section:

2240 Valves

Section Subtitle:

Solenoid, plastic.

WRAS Approval Number:

2306331

Size:

¾” BSP (M) inlet x 12mm spigot outlet.

Marking:

Hongchang, model, production date: YYYMMMDDD on adhesive label on body. Pressure rating and flow arrow on body.

Installation Requirements:

R001 R008

Expiry date:

30/06/2028

Model:

FCD, FCE, FCS, FPD, FPE, FPM, FPS ranges: Type nomenclature: FXYZU X denotes angle between inlet and outlet tube: C (vertical), P (parallel). Y denotes construction of fluid channel: D (single channel), S (double channels), E (triple channels), M (quadruple channels). Z denotes direction of coil assembly spade terminals, indicated as angle value between the spade terminals and the inlet (in degrees): 45, 90, 135, 180, 225, 270, 315, 360. When nomenclature Y = “D” - one value provided. “S” - two values provided. “E” - three values provided. A hyphen is provided between multiple values to indicate the direction of each coil assembly in a counterclockwise direction. e.g., FCE90-225-45G. U denotes optional series number: A - Z or blank, or 0, 1, 2, 3, 4 etc. (this does not affect the water pathway construction).

Approval Holder:

Zhejiang Hongchang Electrical Technology Co.,Ltd.

Company Name

Zhejiang Hongchang Electrical Technology Co.,Ltd.

Address

NO.258 South Shuanglin Street, Jinhua Industrial Zone, Zhejiang Province

Country

China

View All Listings by this Company