Water Regulations Approval Scheme Ltd

Directory Search Results

WRAS Approval Number: #250602017

Range of hand showers and shower arm kits with (brass bodies - various finishes. The inlets of the hand showers and the inlet elbows incorporate approved check valve cartridges; however, the complete products have not been fully tested to demonstrate they provide backflow protection. Open outlet use only. Maximum operating temperature 65°C.

Section:: 1670 Shower Outlets
Section Subtitle:: Shower kit(s)
WRAS Approval Number:: 250602017
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: 1/2" BSP female (with a ½” BSPP male adaptor for international use) for hand showers. 1/2" NPT male for shower arm.
Marking:: Waterworks logo on handset (BHS010, HNHS010 & CNHS10) Waterworks on escutcheon (BHS010 & BSH001CO)
Installation Requirements:: R001 R040
Expiry date:: 30/06/2030
Model:: Hand Showers: BHS010XZZ BHS010ZZ HNHS010ZZ CNHS10ZZ Shower Arm: BSH001XZZ Where XX denotes the finish and can be replaced by: AC = Antique Copper AB = Architectural Bronze AQB = Antique Brass BZ = Architectural Bronze C = Polished Chrome CO = Concordia DN = Dark Nickel G = Gold L = Lumin M = Matte Nickel MC = Matte Chrome MG = Matte Gold MS = Matte Silver N = Polished Nickel S = Silver SC = Shiny Copper SO = Sovereign UB = Unlacquered Brass Where XX denotes the handle components and can be replaced by: 0 = Less Handles 1 = Cross Handle 2 = Two‐Tone Cross Handle 3 = Coin Edge Cross Handle 10 = Solo Series Lever Handle 11 = Lever Handle 12 = Two‐Tone Lever Handle 13 = Coin Edge Lever Handle 14 = Walnut Lever Handle 15 = Leather Lever Handle 20 = Solo Series Straight Lever Handle 2A = Tandem Series Guilloche Lines Lever Handle 2B = Tandem Series Two‐Tone Lever Handle 2C = Union Series Guilloche Link Lever Handle 2D = Union Series Enamel Guilloche Lines Lever Handle 2E = Union Series Guilloche Pinstripe Lever Handle 2P = Solo Series Two‐Piece Straight Lever Handle 2S = Bond Rally Series Lever Handle 2T = Teak Lever Handle 30 = Solo Series Knob Handle 3S = Bond Rally Series Knob Handle 4A = Tandem Series Guilloche Lines Knob Handle 4B = Tandem Series Two‐Tone Guilloche Knob Handle 4D = Union Series Enamel Guilloche Lines Knob Handle 5C = Union Series Guilloche Link Knob Handle 7A = Tandem Series Guiloche Lines Lever handles with Gland Cover 7B = Tandem Series Two Tone Lever handles with Gland Cover 7C = Union Series Guiloche Link Lever handles with Gland Cover 7D = Union Series Enamel Guiloche Lines Lever handles with Gland Cover 7E = Union Series Guiloche Pinstripe Lever handles with Gland Cover 7P = Solo Series Two Piece Straight Lever handle with Gland Cover 7S = Bond Rally Series Lever Handle With Gland Cover 7T = Tandem Series Teak lever with Gland Cover 8Z = Straight Lever Handle 90 = Solo Series Straight Lever handles with Gland Cover

Approval Holder:: Waterworks

Company Name
Waterworks
Address
10 John Street London
Postcode
WC1N2EB
Country
United Kingdom

View All Listings by this Company

WRAS Approval Number: #250602018

Range of wall mounted shower valves (brass bodies – various finishes) incorporating a self-cancelling diverter with a ceramic cartridge headwork controlling flow and temperature and a single lever operating member. Maximum working pressure 10.0 Bar Maximum operating temperature 60.0°C

Section:: 2003 Shower Valves
Section Subtitle:: Shower valve(s) with manual temperature control, incorporating a self-cancelling diverter between outlets.
WRAS Approval Number:: 250602018
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: ½” BSP F
Marking:: Grohe logo on operating member
Installation Requirements:: R001 R030
Expiry date:: 30/06/2030
Model:: 24.336.xx1 32.747.xx1 29.079.xx1 001 – Chrome DC1 – Super steel DA1 – Warm sunset AL1 – Brushed hard graphite. GL1 – cool sunrise

Approval Holder:: Grohe AG

Company Name
Grohe AG
Address
Industriepark Edelburg Hemer
Postcode
58675
Country
Germany
Phone
02372 930
General Email
marc.engelhardt@lixil.com

View All Listings by this Company

WRAS Approval Number: #250708301

Section:: 2011 Shower Valves
Description:: A Shower valve(s) with thermostatic temperature control, incorporating a manual diverter between outlets.
Wall Mounted Concealed Two-way diverter
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Installation Requirements:: R001 R020
Expiry date:: 31/07/2030

Product Identification	Surface Finish / Colour	Dimension	Max Working Pressure (bar)	Max Operating Temp (°C)	Marking	Marking location	All metals in the water pathway are on the 4msi positive list	Headwork for Flow Control	Fixing Type	Spout Outlet	Includes
GUTH71	Brass	1/2" NPT (M)	6	65	Waterworks	Body	No	1/4 Turn ceramic disk
GUTH61 *	Brass	1/2" NPT (M)	6	65	Waterworks	Body	No	1/4 Turn ceramic disk

Notes & Further Information: Product Identification with an * as suffix = models added 11/082025

Approval Holder:: Waterworks Ltd

Company Name
Waterworks Ltd
Address
60 Backus Ave. Danbury
Postcode
CT06810
Country
United States
Phone
2035466207
General Email
mary.kimlinger@waterworks.com

View All Listings by this Company

WRAS Approval Number: #250302721

Range of non-verifiable double check valve assemblies, consisting of two spring loaded resilient trim in-line check valve cartridges housed in DZR brass bodies models HVDCVC-31, HVDCVC-32 are chrome plated. Maximum working pressure 16 Bar Maximum operating temperature 60°C

Section:: 0034 Backflow Prevention Devices
Section Subtitle:: Non-verifiable double check valve assembly - Type ED. Providing Fluid Category 3 protection. Verified by test.
WRAS Approval Number:: 250302721
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Marking:: HVDCVC-31, HVDCVC-32 Airaga logo, CR, eco fil & flow arrow on body. Size on nut. Other models: Altecnic logo, flow arrow, size, pressure & CR on body. Models added September 2025: AI-903228 – Airaga logo, flow arrow, CR on body AI-903025 – Altecnic logo, flow arrow, CR, size on body
Installation Requirements:: R001
Expiry date:: 31/03/2030
Model:: HVDCV-21 (1/2" BSP (F) inlet/outlet) HVDCV-22 (¾” BSP (F) inlet/outlet) HVDCV-24 (1,1/4" BSP (F) inlet/outlet) HVDCV-25 (1,1/2" BSP (F) inlet/outlet) HVDCV-26 (2" BSP (F) inlet/outlet) HVDCVC-31 (15mm compression inlet/outlet) HVDCVC-32 (22mm compression inlet/outlet) Models added Sept 2025: HVDCVC-33 (28mm compression inlet/outlet) HVDCV-23 (1” BSP F inlet/outlet)

Approval Holder:: Herz Valves UK Ltd

Company Name
Herz Valves UK Ltd
Address
Unit 2B, Centurian Business Park Sturrock Way, Bretton Peterborough
Postcode
PE3 8YF

View All Listings by this Company

WRAS Approval Number: #250504717

Range of double check valve assemblies, incorporating two spring loaded resilient trim in-line check valve cartridges housed in DZR brass bodies. Compression connection to be used with copper pipe EN1057. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:: 0034 Backflow Prevention Devices
Section Subtitle:: Non-verifiable double check valve assembly - Type ED. Providing Fluid Category 3 protection. Verified by test.
WRAS Approval Number:: 250504717
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: See models.
Marking:: TS, flow arrow, size, CR, date of manufacture (MM-YY) casted on on body; EN1254-2, size: on compression nut.
Installation Requirements:: R001
Expiry date:: 31/05/2030
Model:: 86881 - 15mm, 61921 - 22mm.

Approval Holder:: Toolstation Ltd.

Company Name
Toolstation Ltd.
Address
Travis Perkins PLC Ryehill House Rye Hill Close Lodge Farm Industrial Estate Northampton
Postcode
NN5 7UA
Country
United Kingdom
Phone
07392109053
General Email
benjamin.cockerill@travisperkins.co.uk

View All Listings by this Company