Directory Search Results

Print List

#241002038

Range of single hole, single outlet (fixed) electronically controlled tap assemblies. Incorporating a solenoid valve activated via an infra-red sensor. The inlets to the control box incorporate stainless steel strainers and the outlet incorporates a plastic aerator. Maximum working pressure: 8 Bar Maximum operating temperature: 65°C

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Tap(s) with a non-touch methods of flow control and a single inlet.
WRAS Approval Number:
241002038
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
10mm Spigot x 1/2" BSP (F) adaptor connected to a ½” BSP (M) x ½” BSP (M) solenoid connected to stainless steel braided, PEX lined flexible hose assembly with a ½” BSP (F) captive nut
Marking:
Stern Logo on tap cover
Installation Requirements:
R001 R006 R009 R010
Expiry date:
31/10/2029
Model:
225610: Touch free B AB1953 & 225710: Touch free E AB1953
Product Images

Approval Holder:
Y. Stern Engineering (1989) Ltd
Company Name
Y. Stern Engineering (1989) Ltd
Address
15 Gan Rave Blvd. Yavne
Postcode
8122217
Country
Israel
Phone
+972 8 9326007
General Email
leah@sternfaucets.com

View All Listings by this Company

Print This Approval


#240602717

Range of wall hung concealed WC flushing cisterns with a BS 1212-4 float operated inlet valve providing a Type AG air gap arrangement and a dual flush outlet valve. The flush volume is operated by a push button assembly. Maximum working pressure - 10 Bar. Cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
240602717
Size:
½” BSP (M)
Marking:
Bagnodesign, WRAS and model name on cover, 6 litre line inside cistern
Installation Requirements:
R001 R280 R556 R581
Expiry date:
30/06/2029
Model:
BAGNODESIGN AQE-B695-D13-ESG1

Approval Holder:
BagnoDesign
Company Name
BagnoDesign
Address
Unit 1 Oakwell Park Trading Estate Birstall
Country
WF17 9LU

View All Listings by this Company

Print This Approval


#241104703

Non-verifiable double check valve assemblies incorporating two spring loaded resilient trim in-line check valve cartridges, DZR brass bodies (brushed chrome) and a drain port located in between the cartridges. The assemblies incorporate spherical valve. Maximum working pressure 10.0 bar. Maximum operating temperature 90°C.

Section:
0034 Backflow Prevention Devices
Section Subtitle:
SCHEDULE 2 - Section 6.2 Type ED - Non-verifiable double check valve.
WRAS Approval Number:
241104703
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
15mm compression x 15mm compression. 15 compression x ½ “ BSP (M)
Marking:
Inta, flow arrow and CR on body
Installation Requirements:
R001
Expiry date:
30/11/2029
Model:
DCV0123.1: 15mm compression x 15mm compression. DCV0123X.1: 15mm compression x ½” BSP (M)
Product Images

Approval Holder:
Intatec Limited
Company Name
Intatec Limited
Address
Airfield Industrial Estate Hixon Staffordshire
Postcode
ST18 0PF
Country
United Kingdom
Phone
01889272180
General Email
ryan.tilsley@intatec.co.uk

View All Listings by this Company

Print This Approval


#241104003

Range of ceramic cartridge headworks with plastic bodies. For insertion into specifically dimensioned bores. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C

Section:
0440 Headworks
Section Subtitle:
Headwork(s) for installation into specifically dimensioned taps or shower valve bodies.
WRAS Approval Number:
241104003
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
see models
Marking:
Galatron Plast on body.
Installation Requirements:
R001
Expiry date:
30/11/2029
Model:
0125CFOC3-000/G25 EVO C3 - 0/90° DX: 25.03mmOD 0125AFOC1-000/G25 Open EVO C1 : 25.07mmOD
Product Images

Manufacturer:
Galatron Plast Spa
Company Name
Galatron Plast Spa
Address
Via Dell' Artigianato 22, Castiglione Delle Stiviere, 46043 Mantova
Country
Italy
Phone
+39 0376 630778 Fax: +39 0376 632333

View All Listings by this Company

Print This Approval


#241104005

Range of ceramic disc headworks with brass bodies. For insertion into specifically dimensioned bores. Maximum working pressure 5.0 bar. Maximum operating temperature 85°C.

Section:
0440 Headworks
Section Subtitle:
Headwork(s) for installation into specifically dimensioned taps or shower valve bodies.
WRAS Approval Number:
241104005
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
18.72OD
Marking:
Gear & model on body.
Installation Requirements:
R001
Expiry date:
30/11/2029
Model:
KB90-1/2C KB90-1/2H
Product Images

Manufacturer:
Xuancheng Gear Precision lndustry Co.,Ltd.
Company Name
Xuancheng Gear Precision lndustry Co.,Ltd.
Address
Building 1 No.33, Jucheng Road,Jiading, Shanghai

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 703 of 801

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.