Range of compression fittings with polypropylene bodies, nuts, acetal grip rings, EPDM ‘O’-rings and plastic pipe liners for use with MDPE pipe manufactured to BS EN 12201. For above and below ground use. Maximum working pressure 16.0 bar. Cold water use only.

Section:

1160 Fittings for use with Tube and Pipe

Section Subtitle:

Compression, plastic, for use with plastic tube. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2009337

Note:

The supplied pipe liners must be installed to maintain the validity of this approval.

Size:

20-63mm compression. ½”-2” BSP (M) or (F)

Marking:

Manufacturers name, size and date of manufacture (clock format) on body.

Installation Requirements:

R001

Expiry date:

30/09/2025

Model:

Couplers: 20.41.2005.020: 20mm 20.41.2005.025: 25mm 20.41.2005.032: 32mm 20.41.2005.040: 40mm 20.41.2005.050: 50mm 20.41.2005.063: 63mm Reducing Couplers: 20 41 2007 005: 25mm x 20mm 20 41 2007 009: 32mm x 20mm 20 41 2007 010: 32mm x 25mm 20 41 2007 015: 40mm x 32mm 20 41 2007 019: 50mm x 32mm 20 41 2007 020: 50mm x 40mm 20 41 2007 023: 63mm x 32mm 20 41 2007 024: 63mm x 40mm 20 41 2007 025: 63mm x 50mm Male Adaptors - Male BSP Thread: 20 41 2037 005: 20mm x ½” 20 41 2037 010: 20mm x ¾” 20 41 2037 011: 20mm x 1” 20 41 2037 015: 25mm x ½” 20 41 2037 020: 25mm x ¾” 20 41 2037 025: 25mm x 1” 20 41 2037 030: 32mm x ¾” 20 41 2037 035: 32mm x 1” 20 41 2037 040: 32mm x 1¼ 20 41 2037 042: 40mm x 1” 20 41 2037 045: 40mm x 1¼” 20 41 2037 046: 40mm x 1½” 20 41 2037 049: 50mm x 1¼” 20 41 2037 050: 50mm x 1½” 20 41 2037 052: 50mm x 2” 20 41 2037 053: 63mm x 1½” 20 41 2037 055: 63mm x 2” Female Adaptors - Female BSP Thread: 20 41 2065 005: 20mm x ½” 20 41 2065 010: 20mm x ¾” 20 41 2065 019: 25mm x ½” 20 41 2065 020: 25mm x ¾” 20 41 2065 022: 25mm x 1” 20 41 2065 033: 32mm x ½” 20 41 2065 034: 32mm x ¾” 20 41 2065 035: 32mm x 1” 20 41 2065 036: 32mm x 1¼” 20 41 2065 044: 40mm x 1” 20 41 2065 045: 40mm x 1¼” 20 41 2065 046: 40mm x 1½” 20 41 2065 049: 50mm x 1¼” 20 41 2065 050: 50mm x 1½” 20 41 2065 051: 50mm x 2” 20 41 2065 054: 63mm x 1½” 20 41 2065 055: 63mm x 2” Elbow 90°: 20 41 2001 020: 20mm 20 41 2001 025: 25mm 20 41 2001 032: 32mm 20 41 2001 040: 40mm 20 41 2001 050: 50mm 20 41 2001 063: 63mm Elbow 90° Female BSP Thread: 20 41 2002 005: 20mm x ½’ 20 41 2002 006: 20mm x ¾” 20 41 2002 009: 25mm x ½” 20 41 2002 010: 25mm x ¾” 20 41 2002 011: 25mm x 1” 20 41 2002 013: 32mm x ¾” 20 41 2002 015: 32mm x 1” 20 41 2002 019: 40mm x 1” 20 41 2002 020: 40mm x 1¼” 20 41 2002 025: 50mm x 1½” 20 41 2002 026: 50mm x 2” 20 41 2002 030: 63mm x 2” Elbow 90° Male BSP Thread: 20 41 2085 005: 20mm x ½” 20 41 2085 006: 20mm x ¾” 20 41 2085 009: 25mm x ½” 20 41 2085 010: 25mm x ¾” 20 41 2085 011: 25mm x 1” 20 41 2085 014: 32mm x ¾” 20 41 2085 015: 32mm x 1” 20 41 2085 016: 32mm x 1¼” 20 41 2085 019: 40mm x 1” 20 41 2085 020: 40mm x 1¼” 20 41 2085 021: 40mm x 1½” 20 41 2085 022: 40mm x 2” 20 41 2085 022: 50mm x 1¼” 20 41 2085 025: 50mm x 1½” 20 41 2085 026: 50mm x 2” 20 41 2085 029: 63mm x 1½” 20 41 2085 030: 63mm x 2” Tee Male BSP Threaded: 20 41 2086 005: 20mm x ½” 20 41 2086 006: 20mm x ¾” 20 41 2086 009: 25mm x ½” 20 41 2086 010: 25mm x ¾” 20 41 2086 011: 25mm x 1” 20 41 2086 014: 32mm x ¾” 20 41 2086 015: 32mm x 1” 20 41 2086 019: 40mm x 1” 20 41 2086 020: 40mm x 1¼” 20 41 2086 021: 40mm x 1½” 20 41 2086 025: 50mm x 1½” 20 41 2086 026: 50mm x 2” 20 41 2086 030: 63mm x 2” Tee Female BSP Threaded: 20 41 2004 005: 20mm x ½” 20 41 2004 006: 20mm x ¾” 20 41 2004 009: 25mm x ½” 20 41 2004 010: 25mm x ¾” 20 41 2004 011: 25mm x 1” 20 41 2004 014: 32mm x ¾” 20 41 2004 015: 32mm x 1” 20 41 2004 019: 40mm x 1” 20 41 2004 020: 40mm x 1¼” 20 41 2004 021: 40mm x 1½” 20 41 2004 024: 50mm x 1¼” 20 41 2004 025: 50mm x 1½” 20 41 2004 026: 50mm x 2” 20 41 2004 030: 63mm x 2” Tee: 20 41 2003 020: 20mm 20 41 2003 025: 25mm 20 41 2003 032: 32mm 20 41 2003 040: 40mm 20 41 2003 050: 50mm 20 41 2003 063: 63mm Reducing Tee: 20 41 2004 104: 20 x 25 x 20mm 20 41 2004 105: 25 x 20 x 25mm 20 41 2004 110: 32 x 25 x 32mm 20 41 2004 115: 40 x 32 x 40mm 20 41 2004 118: 50 x 25 x 50mm 20 41 2004 119: 50 x 32 x 50mm 20 41 2004 120: 50 x 40 x 50mm 20 41 2004 122: 63 x 25 x 63mm 20 41 2004 123: 63 x 32 x 63mm 20 41 2004 124: 63 x 40 x 63mm 20 41 2004 125: 63 x 50 x 63mm End Cap: 20 41 2012 020: 20mm 20 41 2012 025: 25mm 20 41 2012 032: 32mm 20 41 2012 040: 40mm 20 41 2012 050: 50mm 20 41 2012 063: 63mm

Approval Holder:

Plimat (UK) Ltd

Company Name

Plimat (UK) Ltd

Address

Unit 7, Newmans Copse Road, Hounsdown Business Park, Totton, Southampton

Postcode

SO40 9LX

Phone

0845 055 9022

View All Listings by this Company

Fluidfit range of hose barb fittings/stem fittings with push fit connections. Also with EPDM ‘O’-rings. 12 & 15mm models are for use with LLDPE pipe, 22mm models are for use with PEX pipe. Cold water use only Maximum working pressure 10.0 Bar

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2009023

Size:

12mm push fit X barbed crimp connection 15mm push fit X barbed crimp connection 22mm push fit X barbed crimp connection

Marking:

CDC and size on collet

Installation Requirements:

R001

Expiry date:

30/09/2025

Model:

HCBB 1210 (12mm) HCBB 15-1/2 (15mm) HCBB 22-1/2 (15mm) HCBB 22-3/4 (15mm)

Approval Holder:

CDC Pneumatics Corp.

Company Name

CDC Pneumatics Corp.

Address

30, 1-Gil, Secheon-no, Dasa-eup, Dalseong-gun, Daegu (Saecheon-ri) 42921

Country

South Korea

Phone

+82 533547501

General Email

sales@cdcpneumatics.com

View All Listings by this Company

Manufacturer:

CDC Pneumatics Corp.

Company Name

CDC Pneumatics Corp.

Address

30, 1-Gil, Secheon-no, Dasa-eup, Dalseong-gun, Daegu (Saecheon-ri) 42921

Country

South Korea

Phone

+82 533547501

General Email

sales@cdcpneumatics.com

View All Listings by this Company

Range of press fittings incorporating copper or copper alloy bodies and EPDM O’-rings for use with copper tube to EN1057. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2010316

Size:

See model.

Marking:

Conex logo >B< on body

Installation Requirements:

R001

Expiry date:

31/10/2025

Model:

Copper alloy: PIR4090G; - Threaded Elbow PIR4090G040400 – ½” x ½” BSP (M) PIR4090G060600 – ¾” x ¾” BSP (M) PIR4092G; - Press Elbow PIR4092G040400 – ½” x ½” BSP (M) PIR4092G060600 – ¾” x ¾” BSP (M) PIR4243G; - Male Adaptor PIR4243G040400 – ½” x ½” BSP (M) PIR4243G040600 – ½” x ¾” BSP (M) PIR4243G060400 – ¾” x ½” BSP (M) PIR4243G060600 – ¾” x ¾” BSP (M) PIR4243G080600 – 1” x ¾” BSP (M) PIR4243G080800 – 1” x 1” BSP (M) PIR4471G; - Female Wallplate Elbow PIR4471G040400 – ½” x ½” BSP (M) PIR4471G060600 – ¾” – ¾” BSP (M) PIR4473G; - Male Wall plate Elbow PIR4473G040400 – ½” BSP (M) PIR4270G; - Female Adaptor PIR4270G040400 – ½” x ½” BSP (M) PIR4270G060600 – ¾” x ¾” BSP (M) PIR4270G080800 – 1” x 1” BSP (M Copper: PIR5040; - 45° Street Elbow PIR5040 040000 – ½” BSP (M) PIR5040 060000 – ¾” BSP (M) PIR5040 080000 – 1” BSP (M) PIR5001; - 90° Street Bend PIR5001 040000 – ½” BSP (M) PIR5001 060000 – ¾” BSP (M) PIR5001 080000 – 1” BSP (M) PIR5240; - Reducing Coupler PIR5240 060400 – ¾” x ½” BSP (M) PIR5240 080400 – 1” x ½” BSP (M) PIR5240 080600 – 1” x ¾” BSP (M) PIR5130; - Tee Reduced PIR5130 060604 – ¾” x ¾” x ½” BSP (M) PIR5002; - 90° Bend PIR5002 040000 – ½” BSP (M) PIR5002 060000 – ¾” BSP (M) PIR5002 080000 – 1” V PIR5041; - 45° Elbow PIR5041 040000 – ½” BSP (M) PIR5041 060000 – ¾” BSP (M) PIR5041 080000 – 1” BSP (M) PIR5130; - Equal Tee PIR5130 040000 – ½” BSP (M) PIR5130 060000 – ¾” BSP (M) PIR5130 080000 – 1” BSP (M) PIR5270; - Coupler PIR5270 040000 – ½” BSP (M) PIR5270 060000 – ¾” BSP (M) PIR5270 080000 – 1” BSP (M) PIR5301; – Stop End PIR5301 040000 – ½” BSP (M) PIR5301 060000 – ¾” BSP (M) PIR5301 080000 – 1” BSP (M) PIR5130RB; - Tee Reduced Branch PIR5130 060406 – ¾” x ½” x ¾” BSP (M) PIR5130 080408 – 1” x ½” x 1” BSP (M) PIR5130 080608 – 1” x ¾” x 1” BSP (M) PIR5275; - Slip Coupler PIR5275 040000 – ½” BSP (M) PIR5275 060000 – ¾” BSP (M) PIR5275 080000 – 1” BSP (M) PIR5243; - Fitting Reducer PIR5243 060400 – ¾” x ½” BSP (M) PIR5243 080400 – 1” x ½” BSP (M) PIR5243 080600 – 1” x ¾” BSP (M) PIR5130REB - Tee Reduced End & Branch PIR5130 060404 – ¾” x ½” x ½” BSP (M) Models added February 2021: PIR5130 080806 – 1” X 1” X ¾” BSP (M) PIR5130 040604 – ½” X ¾” X ½” BSP (M) PIR5130 060806 – ¾“ X 1” X ¾” BSP (M) PIR5130 040804 – ½” X 1” X ½” BSP (M) PIR5130 080404 – 1” X ½” X ½” BSP (M) PIR5130 080604 – 1” X ¾” X ½” BSP (M) PIR5130 080406 – 1” X ½” X ¾” BSP (M)

Product Images

Approval Holder:

Conex Universal Limited

Company Name

Conex Universal Limited

Address

Unit 95, Vantage Point Kingswinford

Postcode

DY6 7FT

Country

United Kingdom

Phone

+44 (0)121 5772831

General Email

Christopher.Harte@IBPGroup.com

View All Listings by this Company

Manufacturer:

IBP Atcosa SL

Company Name

IBP Atcosa SL

Address

General Email

View All Listings by this Company

Range of press fittings with a stainless steel body and EPDM ‘O’ rings for use with stainless steel 316L pipe manufactured to EN10312. For above ground use only. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2101334

Size:

see model

Marking:

Dunshan Press and size on body.

Installation Requirements:

R001

Expiry date:

31/01/2026

Model:

DS2001‐15 Equal coupling 15mm DS2001‐18 Equal coupling 18mm DS2001‐22 Equal coupling 22mm DS2001‐28 Equal coupling 28mm DS2001‐35 Equal coupling 35mm DS2001‐42 Equal coupling 42mm DS2001‐54 Equal coupling 54mm DS2002‐15 Adjustable coupling 15mm DS2002‐18 Adjustable coupling 18mm DS2002‐22 Adjustable coupling 22mm DS2002‐28 Adjustable coupling 28mm DS2002‐35 Adjustable coupling 35mm DS2002‐42 Adjustable coupling 42mm DS2002‐54 Adjustable coupling 54mm DS2003‐15 90° equal elbow 15mm DS2003‐18 90° equal elbow 18mm DS2003‐22 90° equal elbow 22mm DS2003‐28 90° equal elbow 28mm DS2003‐35 90° equal elbow 35mm DS2003‐42 90° equal elbow 42mm DS2003‐54 90° equal elbow 54mm DS2004‐15 90° plain elbow‐B 15mm DS2004‐18 90° plain elbow‐B 18mm DS2004‐22 90° plain elbow‐B 22mm DS2004‐28 90° plain elbow‐B 28mm DS2004‐35 90° plain elbow‐B 35mm DS2004‐42 90° plain elbow‐B 42mm DS2004‐54 90° plain elbow‐B 54mm DS2005‐15 45° equal elbow 15mm DS2005‐18 45° equal elbow 18mm DS2005‐22 45° equal elbow 22mm DS2005‐28 45° equal elbow 28mm DS2005‐35 45° equal elbow 35mm DS2005‐42 45° equal elbow 42mm DS2005‐54 45° equal elbow 54mm DS2006‐15 45° plain elbow‐B 15mm DS2006‐18 45° plain elbow‐B 18mm DS2006‐22 45° plain elbow‐B 22mm DS2006‐28 45° plain elbow‐B 28mm DS2006‐35 45° plain elbow‐B 35mm DS2006‐42 45° plain elbow‐B 42mm DS2006‐54 45° plain elbow‐B 54mm DS2007‐15 Equal tee 15mm DS2007‐18 Equal tee 18mm DS2007‐22 Equal tee 22mm DS2007‐28 Equal tee 28mm DS2007‐35 Equal tee 35mm DS2007‐42 Equal tee 42mm DS2007‐54 Equal tee 54mm DS2008‐18*15 Reducing tee 18mm×15mm DS2008‐22*15 Reducing tee 22mm×15mm DS2008‐22*18 Reducing tee 22mm×18mm DS2008‐28*15 Reducing tee 28mm×15mm DS2008‐28*18 Reducing tee 28mm×18mm DS2008‐28*22 Reducing tee 28mm×22mm DS2008‐35*15 Reducing tee 35mm×15mm DS2008‐35*18 Reducing tee 35mm×18mm DS2008‐35*22 Reducing tee 35mm×22mm DS2008‐35*28 Reducing tee 35mm×28mm DS2008‐42*15 Reducing tee 42mm×15mm DS2008‐42*18 Reducing tee 42mm×18mm DS2008‐42*22 Reducing tee 42mm×22mm DS2008‐42*28 Reducing tee 42mm×28mm DS2008‐42*35 Reducing tee 42mm×35mm DS2008‐54*15 Reducing tee 54mm×15mm DS2008‐54*18 Reducing tee 54mm×18mm DS2008‐54*22 Reducing tee 54mm×22mm DS2008‐54*28 Reducing tee 54mm×28mm DS2008‐54*35 Reducing tee 54mm×35mm DS2008‐54*42 Reducing tee 54mm×42mm DS2009‐15*Rp1/2 Female coupling 15mm×Rp1/2’’ DS2009‐22*Rp3/4 Female coupling 22mm×Rp3/4” DS2009‐28*Rp1 Female coupling 28mm×Rp1” DS2009‐35*Rp1 1/4 Female coupling 35mm×Rp1‐“1/4” DS2009‐42*Rp1 1/2 Female coupling 42mm×Rp1‐1/2” DS2009‐54*Rp2 Female coupling 54mm×Rp2” DS2010‐15*G1/2 Rotatable coupling 15mm×G1/2” DS2010‐18*G1/2 Rotatable coupling 18mm×G1/2” DS2010‐22*G3/4 Rotatable coupling 22mm×G3/4” DS2010‐28*G1 Rotatable coupling 28mm×G1” DS2010‐35*G1 1/4 Rotatable coupling 35mm×G1‐1/4” DS2010‐42*G1 1/2 Rotatable coupling 42mm×G1‐1/2” DS2010‐54*G2 Rotatable coupling 54mm×G2” DS2011‐15*R1/2 Male coupling 15mm×R1/2” DS2011‐18*R1/2 Male coupling 18mm×R1/2” DS2011‐22*R3/4 Male coupling 22mm×R3/4” DS2011‐28*R1 Male coupling 28mm×R1” DS2011‐35*R1 1/4 Male coupling 35mm×R1‐1/4” DS2011‐42*R1 1/2 Male coupling 42mm×R1‐1/2” DS2011‐54*R2 Male coupling 54mm×R2” DS2012‐15*Rp1/2 Female elbow 15mm×Rp1/2” DS2012‐18*Rp1/2 Female elbow 18mm×Rp1/2” DS2012‐22*Rp3/4 Female elbow 22mm×Rp3/4” DS2012‐28*Rp1 Female elbow 28mm×Rp1” DS2012‐35*Rp1 1/4 Female elbow 35mm×Rp1‐1/4” DS2012‐42*Rp1 1/2 Female elbow 42mm×Rp1‐1/2” DS2012‐54*Rp2 Female elbow 54mm×Rp2” DS2013‐15*R1/2 Male elbow 15mm×R1/2” DS2013‐18*R1/2 Male elbow 18mm×R1/2” DS2013‐22*R1/2 Male elbow 22mm×R1/2” DS2013‐22*R3/4 Male elbow 22mm×R3/4” DS2013‐28*R1 Male elbow 28mm×R1” DS2013‐35*R1 1/4 Male elbow 35mm×R1‐1/4” DS2013‐42*R1 1/2 Male elbow 42mm×R1‐1/2” DS2013‐54*R2 Male elbow 54mm×R2” DS2014‐15*Rp1/2 Female tee 15mm×Rp1/2” DS2014‐18*Rp1/2 Female tee 18mm×Rp1/2” DS2014‐22*Rp3/4 Female tee 22mm×Rp3/4” DS2014‐28*Rp1/2 Female tee 28mm×Rp1/2 DS2014‐28*Rp1 Female tee 28mm×Rp1” DS2014‐35*Rp1 1/4 Female tee 35mm×Rp1‐1/4” DS2014‐42*Rp1 1/2 Female tee 42mm×Rp1‐1/2” DS2014‐54*Rp2 Female tee 54mm×Rp2” DS2015‐15*R1/2 Male tee 15mm×R1/2” DS2015‐18*R1/2 Male tee 18mm×R1/2” DS2015‐22*R3/4 Male tee 22mm×R3/4” DS2015‐28*R1/2 Male tee 28 mm×R1/2’’ DS2015‐28*R1 Male tee 28mm×R1” DS2015‐35*R1 1/4 Male tee 35mm×R1‐1/4” DS2015‐42*R1 1/2 Male tee 42mm×R1‐1/2” DS2015‐54*R2 Male tee 54mm×R2” DS2016‐18*15 Reducer‐A 18mm×15mm DS2016‐22*15 Reducer‐A 22mm×15mm DS2016‐22*18 Reducer‐A 22mm×18mm DS2016‐28*15 Reducer‐A 28mm×15mm DS2016‐28*18 Reducer‐A 28mm×18mm DS2016‐28*22 Reducer‐A 28mm×22mm DS2016‐35*15 Reducer‐A 35mm×15mm DS2016‐35*18 Reducer‐A 35mm×18mm DS2016‐35*22 Reducer‐A 35mm×22mm DS2016‐35*28 Reducer‐A 35mm×28mm DS2016‐42*15 Reducer‐A 42mm×15mm DS2016‐42*18 Reducer‐A 42mm×18mm DS2016‐42*22 Reducer‐A 42mm×22mm DS2016‐42*28 Reducer‐A 42mm×28mm DS2016‐42*35 Reducer‐A 42mm×35mm DS2016‐54*42 Reducer‐A 54mm×42mm DS20107‐18*15 Reducer Coupling‐B 18mm×15mm DS20107‐22*15 Reducer Coupling‐B 22mm×15mm DS20107‐22*18 Reducer Coupling‐B 22mm×18mm DS20107‐28*15 Reducer Coupling‐B 28mm×15mm DS20107‐28*18 Reducer Coupling‐B 28mm×18mm DS20107‐28*22 Reducer Coupling‐B 28mm×22mm DS20107‐35*15 Reducer Coupling‐B 35mm×15mm DS20107‐35*18 Reducer Coupling‐B 35mm×18mm DS20107‐35*22 Reducer Coupling‐B 35mm×22mm DS20107‐35*28 Reducer Coupling‐B 35mm×28mm DS20107‐42*15 Reducer Coupling‐B 42mm×15mm DS20107‐42*18 Reducer Coupling‐B 42mm×18mm DS20107‐42*22 Reducer Coupling‐B 42mm×22mm DS20107‐42*28 Reducer Coupling‐B 42mm×28mm DS20107‐42*35 Reducer Coupling‐B 42mm×35mm DS20107‐54*15 Reducer Coupling‐B 54mm×15mm DS20107‐54*18 Reducer Coupling‐B 54mm×18mm DS20107‐54*22 Reducer Coupling‐B 54mm×22mm DS20107‐54*28 Reducer Coupling‐B 54mm×28mm DS20107‐54*35 Reducer Coupling‐B 54mm×35mm DS20107‐54*42 Reducer Coupling‐B 54mm×42mm

Product Images

Approval Holder:

Wenzhou Dunshan EPT Co.,Ltd.

Company Name

Wenzhou Dunshan EPT Co.,Ltd.

Address

Building B, No. 500, Lingde Road, Kunpeng Street, Oujiangkou Industrial Cluster, Wenzhou City, Zhejiang Province

Country

China

View All Listings by this Company

Manufacturer:

Wenzhou Dunshan EPT Co.,Ltd.

Company Name

Wenzhou Dunshan EPT Co.,Ltd.

Address

Building B, No. 500, Lingde Road, Kunpeng Street, Oujiangkou Industrial Cluster, Wenzhou City, Zhejiang Province

Country

China

View All Listings by this Company

Range of water meters with plastic bodies and EPDM ‘O’-rings. The inlets incorporate a plastic strainer. Maximum working pressure 10.0 bar. Cold water use only.

Section:

1505 Water Meters

Size:

See model.

Marking:

ARAD on cap. Flow arrow on body. ARAD, model number and other technical info on meter face

Installation Requirements:

R001

Expiry date:

31/10/2025

Model:

Water meter Multi-Jet type M Polymer family: M15 ¾” BSP (M) M20 1” BSP (M) M25 1¼'' BSP (M)

Product Images

Approval Holder:

Arad GROUP Ltd.

Company Name

Arad GROUP Ltd.

Address

Kibbutz Dalia 1923900 Kibutzz Dalia

Country

Israel

Phone

+972-4-9897906

General Email

Dars@arad.co.il

View All Listings by this Company

Manufacturer:

Arad GROUP Ltd.

Company Name

Arad GROUP Ltd.

Address

Kibbutz Dalia 1923900 Kibutzz Dalia

Country

Israel

Phone

+972-4-9897906

General Email

Dars@arad.co.il

View All Listings by this Company