Range of spout outlets incorporating stainless steel bodies (various finishes) and a plastic aerator. Maximum operating temperature 60°C.

Section:

0682 Combination Tap Assemblies

Section Subtitle:

Spout outlet(s).

WRAS Approval Number:

2110305

Note:

Open outlet use only.

Size:

½” BSP (M)

Marking:

QTOO (brand of D Line) on rosette.

Installation Requirements:

R001 R040

Expiry date:

31/10/2026

Model:

QA3080xxx Spout 115mm, rose 80mm, 45 degree. QA3090xxx Spout 115mm, rose 90mm, 45 degree. QA3180xxx Spout 190mm, rose 80mm. QA3190xxx Spout 190mm, rose 90mm. QA3280xxx Spout 250mm, rose 80mm. QA3290xxx Spout 250mm, rose 90mm. QA3380xxx Spout 191mm, rose 80mm, 45 degree. QA3390xxx Spout 191mm, rose 90mm, 45 degree. Where xxx denotes the surface finish (which is a non-water contact part). It can be 1 to 3 digits, which can be any combination of numbers and/or letters, as examples: M = brushed stainless steel finish, PP1 = polished PVD gunmetal finish.

Approval Holder:

D Line

Company Name

D Line

Address

Jylingevej 59, kld Copenhagen

Postcode

2720

Country

Denmark

Phone

+4572170138

General Email

rik@dline.com

View All Listings by this Company

‘Quattroselect’ range of chemical dosing units incorporating a lockable self-closing trigger assembly and a self-closing bottle filler assembly which control the flow. The products are supplied with an approved double check valve assembly at the inlet (suitable for backflow prevention against fluid category 3). Maximum working pressure 5.8 bar. Cold water use only.

Section:

0970 Dosing Equipment

Section Subtitle:

Fittings in this section have been judged only against the requirements of The Water Supply (Water Fittings) Regulations 1999 (England and Wales), The Water Supply (Water Fittings) (Scotland) Byelaws 2014 or The Water Supply (Water Fittings) Regulations (Northern Ireland) 2009. The decision of the Scheme to list them is not to be taken as any guide as to their effectiveness to do the job for which they have been designed

WRAS Approval Number:

2110700

Size:

¾” BSP (M)

Marking:

Quattroselect on hose trigger. Diversey on label on door panel. Quattroselect on front panel. Other product info inside door panel.

Installation Requirements:

R001 R160 R040

Expiry date:

31/10/2026

Proviso:

Not suitable for use with chemicals greater than a fluid category 3 risk.

Model:

1219424 – QuattroSelect Pouch air gap CW 1219425 – QuattroSelect Pouch safe gap CW 1211418 – QuattroSelect Pouch air gap

Approval Holder:

Diversey Europe Operations BV.

Company Name

Diversey Europe Operations BV.

Address

De Boelelaan 32, 1083 HJ Amsterdam, Netherlands

View All Listings by this Company

Range of carbon block water filters and housings. Maximum working pressure 10.5 bar. Cold water use only.

Section:

1050 Filters and Housings

Size:

¾” BSP male inlet and outlet

Marking:

Spectrum and technical information on adhesive label on side of body.

Installation Requirements:

R001 R120 R150 R170 R290

Expiry date:

30/11/2026

Model:

Spectrum PV-CTU range comprising of models: PV-CTU-517-(3) PV-CTU-613-(4) PV-CTU-717-(7) PV-CTU-730-(13) PV-CTU-817-(8) PV-CTU-835-(19) PV-CTU-1035-(31) PV-CTU-1054-(49)

Approval Holder:

Fileder Filter Systems Ltd.

Company Name

Fileder Filter Systems Ltd.

Address

20/20 BUSINESS PARK, MAIDSTONE, KENT

Postcode

ME16 0LS

Country

United Kingdom

Phone

01622 621940

General Email

jasmine@fileder.co.uk

View All Listings by this Company

Range of water filter housings with plastic heads and bodies (various colours - see model), incorporating NBR ‘O’-rings (158087/088/207/208/218/219/261 models only) or with EPDM ‘O’-rings (all other models). Big Blue for Cartridges - Maximum working pressure 6.9 bar (10” filter housings) and 6.2 bar (20” filter housings). Maximum working temp 38°C. All other models - Maximum working pressure 8.62 bar. Maximum working temp 52°C.

Section:

1050 Filters and Housings

WRAS Approval Number:

2111021

Note:

IRN R008 applies to products with “CLEAR” or “CL” in model code only. This approval does not include the filter media intended for use with this product.

Size:

Standard Housings & 3G Standard models: ¾” BSP (F) Big Blue for cartridges 150253/254/257/258 models: 1½” BSP (F). Big Blue for cartridges 150262/263/272/273 models: 1” BSP (F). Slim Line models: ½” BSP (F), except for; Slim Line 158085/086/158087/087/121/122/261 models: ⅜” BSP (F). 3G Slim Line models: ½” BSP (F), except for; 3G Slim Line 158632 model: ⅜” BSP (F). Black Housings 150670/674 models: ¾” BSP (F). Big Blue for Cartridges (Black) Housings 150675/676 models: 1” BSP (F).

Marking:

PENTAIR on adhesive label on body

Installation Requirements:

R001 R008 R120 R150 R170 R290

Expiry date:

30/11/2026

Model:

Product Family: Standard Housings (Black filter head and blue filter housing). 150102: #10 BL W/PR,BT,MB CAP(EX) 12/C. 150103: #10 BL WO/PR,BT,MB CAP(EX) 12/C. 150104: #20 BL W/PR,BT,MB CAP(EX) 8/C. 150105: #20 BL WO/PR,BT,MB CAP(EX) 8/C. Product Family: Black Housings (Black filter head and black filter housing). 150670: #10 BK&BK MB BSP CAP. 150674: #20 STD BK/BK MB BSP W/PR 8/C. Product Family: 3G Standard (Black filter head and blue filter housing). 150543: #10 3G-ST BK/BL 3/4"BT MB W/PR. 150545: #20 3G-ST BK/BL 3/4"BT MB W/PR. 150549: #20 3G-ST BK/BL 3/4"BT MB. 150551: #10 3G-ST BK/BL 3/4"BT IB W/PR. 150553: #20 3G-ST BK/BL 3/4"BT IB W/PR. Product Family: Big Blue for Cartridges (Black filter head and blue filter housing). 150253: 20"BIG BL,BTHFPP W/PR,1.5" 4/C. 150254: 20"BIG BL,BTHFPP WO/PR,1.5" 4/C. 150257: BIG BL,BT HFPP W/PR,1-1/2" 6/C. 150258: BIG BL,BT HFPP WO/PR,1-1/2" 6/C. 150262: #10 BB BK/BL 1" BT W/PR 6/C. 150263: BIG BL,BT HFPP WO/PR,1"(EX) 6/C. 150273: 20"BIG BL,BT HFPP W/PR,1" 4/C. 150274: 20"BIG BL,BT HFPP WO/PR,1" 4/C. Product Family: Big Blue for Cartridges (Black) (Black filter head and black filter housing). 150675: #20 BB BK/BK 1" BSP W/PR 4/C. 150676: #10 BB BK/BK 1" BSP W/PR 6/C*O. Product family: Slim Line BL/CL 5” (Blue filter head and clear filter housing). 158121: 3/8"#5 CLEAR W/PR,BT (EX) 12/C. 158122: 3/8"#5 CL WO/PR,BT (EX) 12/C. 158240: 1/2"#5 CLEAR W/PR,BT (EX) 12/C. 158241: 1/2"#5 CL WO/PR,BT (EX) 12/C. Product family: Slim Line BL/CL 10” (Blue filter head and clear filter housing). 158218: 1/2''SL CLEAR W/PR;BT (EX) 12/C. 158219: 1/2''SL CL WO/PR;BT (EX) 12/C. Product family: Slim Line BK/BL (Black filter head and blue filter housing). 158085: #5 BLUE W/PR BT (EX) 12/C. 158086: #5 BLUE WO/PR BT (EX) 12/C. 158087: #10 SL BK/BL 3/8' W/PR BT 12/C. 158088: #10 SL BLUE WO/PR;BT(EX) 12/C. 158207: 1/2"#10 SL BL W/PR,BT(EX) 12/C. 158208: 1/2"SL BLUE WO/PR,BT (EX) 12/C. 158210: 1/2" #5 BLUE W/PR BT (EX) 12/C. 158211: 1/2"#5 BLUE WO/PR BT (EX) 12/C. Product family: Slim Line White (White filter head and white filter housing). 158261: #10 SL WH/WH 3/8' W/O PR BT12/C. Product Family: 3G Slim Line BK/BL (Black filter head and blue filter housing). 158588: #10 3G-SL BK/BL 1/2"BT MB W/PR. 158589: #10 3G-SL BK/BL 1/2" BT MB. 158628: #10 3G-SL BK/BL 1/2"BT IB W/PR. 158632: #10 3G-SL BK/BL 3/8"BT IB W/PR. Product Family: 3G Slim Line BL/CL (Blue filter head and clear filter housing). 158590: #10 3G-SL BL/CL 1/2"BT MB W/PR. 158630: #10 3G-SL BL/CL 1/2'BT IB W/PR. 158631: #10 3G-SL BL/CL 1/2"BT IB 12/C.

Approval Holder:

Pentair International

Company Name

Pentair International

Address

Avenue de Sevelin 18 1004 Lausanne Switzerland

General Email

info@pentair.com

View All Listings by this Company

Manufacturer:

Pentair International

Company Name

Pentair International

Address

Avenue de Sevelin 18 1004 Lausanne Switzerland

General Email

info@pentair.com

View All Listings by this Company

Carbon block filter cartridge with plastic body. The cartridge may be installed with a manifold (filter head) for use with PE tubing manufactured to BS 1972. Maximum working pressure 8.6 bar. Cold water use only

Section:

1055 Filter Cartridges

WRAS Approval Number:

2111029

Note:

R008 applies to the TLH1 Twist and lock Single Stage Manifold.

Size:

Filter: 11mm spigot. Manifold: ¼” pushfit.

Marking:

Paragon Water Systems, model and technical info on label on body

Installation Requirements:

R001 R120 R150 R170 R290 R008

Expiry date:

30/11/2026

Model:

TLCS1P filter cartridge. Model added in December 2022: TLH1 Twist and lock Single Stage Manifold.

Approval Holder:

Paragon Water Systems, Inc.

Company Name

Paragon Water Systems, Inc.

Address

13805 Monroes Business Park, Tampa Fl. 33635 USA

General Email

cbird@paragonwater.com

View All Listings by this Company