'TS2160'. Factory applied, grey coloured, enamel coating intended to line glass fused steel tanks. Apply two coats as per manufacturer's Work Instructions 'AQ 10 07 Rev.1'. Fire for 10 minutes at 840°C. For use with water up to 23°C. This material is only approved for the firing conditions that appear on the approval. If the firing conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:

5030 Coatings, Paints & Linings

Section Subtitle:

Factory applied pipe & fittings coatings.

WRAS Approval Number:

250755031

Expiry date:

31/07/2030

Approval Holder:

Omerastore GmbH

Company Name

Omerastore GmbH

Address

Am Emaillierwerk 1, 08315 Lauter-Bernsbacj

Country

Germany

View All Listings by this Company

‘Nitcote CM 210’. Site applied, two-part, grey coloured (once applied), Cementitious Waterproofing coating. Mix ‘CM 210 white’ liquid polymer and ‘CM 210 grey’ powder in a 1:3.6 weight ratio and apply two coats as per manufacturer's TDS 'UAE/0210/23/Z-1'. Cure Coat 1 for 3 hours@35°C and Coat 2 for 21 days@23°C. For use with water up to 65°C. This material is only approved for the mixing & curing conditions that appear on the approval. If the mix and/or cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:

5042 Coatings, Paints & Linings

Section Subtitle:

Site applied pipe and fittings coatings. Compliance with BS6920 relates to the conditions of cure specified in the listing. If the cure conditions are varied from those described below then compliance with BS6920 cannot be assummed without further testing. Where catalysts are required, only tested catalysts in the recommended concentrations should be used. Manufacturer's advice must be sought if any non standard mixing or curing conditions are being considered.

WRAS Approval Number:

250755056

Expiry date:

31/07/2030

Approval Holder:

Al Gurg Fosroc LLC

Company Name

Al Gurg Fosroc LLC

Address

PO Box 657, 215 Community, Street No. 13, Nad Al Hamar Road, Al Ramool Industrial Area, Dubai

Country

United Arab Emirates

View All Listings by this Company

'3P764921 Pipe Spacer'. White coloured (opaque), injection moulded PP Pipe Spacer. For use with water up to 85°C.

Section:

5260 Polypropylene

Section Subtitle:

Components.

WRAS Approval Number:

250755043

Expiry date:

31/07/2030

Approval Holder:

DAIKIN DEVICE CZECH REPUBLIC s.r.o.

Company Name

DAIKIN DEVICE CZECH REPUBLIC s.r.o.

Address

Švédské valy 2, 627 00 Brno

Country

Czech Republic

View All Listings by this Company

‘Udel P-3500 NT LCD, GF-110 NT, GF-120 NT, GF-121 NT, P-1700 NT 11 MR, P-1700 NT 11, GF-121 NT ECHO RP & P-3500 NT LCD ECHO RP’ (all beige translucent). ‘Udel P-1700 Grey 8057’ (grey coloured). ‘Udel P-1700 BK 937, P-1700 BK 937 MR, GF-120 BK 937, GF-121 BK 937, GF-121 BK 937 ECHO RP, GF-120 BK 937 ECHO RP & P-1700 BK937 ECHO RP’ (all black coloured). ‘Udel P-1700 WH 7407’ (white coloured). Injection moulded, polysulphone materials. For use with water up to 85°C.

Section:

5280 Polysulphone

Section Subtitle:

Material only. Components made from materials listed in this section may be required to be submitted for audit tests.

WRAS Approval Number:

251055011

Expiry date:

31/10/2030

Approval Holder:

Syensqo Specialty Polymers USA, LLC

Company Name

Syensqo Specialty Polymers USA, LLC

Address

4500 McGinnis Ferry Road, Alpharetta, Georgia 30005

Country

United States

View All Listings by this Company

'AP-EPDM 50A, AP-EPDM 60A, AP-EPDM 70A & AP-EPDM 80A'. Black coloured, compression moulded EPDM materials. Shore hardness between 50A & 80A. Tested in-radius size between 1.15mm & 1.21mm. For use with water up to 65°C.

Section:

5365 Rubbers

Section Subtitle:

Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.

WRAS Approval Number:

250655040

Expiry date:

30/06/2030

Approval Holder:

AGAM Polymers Private Limited

Company Name

AGAM Polymers Private Limited

Address

30/37 A, West Patel Nagar, New Delhi -110008

Country

India

View All Listings by this Company