Range of angled pressure relief valves (3.5 & 6.0 Bar) with DZR brass bodies. PREL107020 is for use with copper pipe manufactured to BS EN 1057. Maximum working pressure 10.0 Bar. Maximum operating temperature 90°C.

Section:

2210 Valves

Section Subtitle:

Pressure relief valve(s)

WRAS Approval Number:

250502719

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

1/2" BSP male inlet x 1/2" BSP female outlet (PREL107015), 1/2" BSP male inlet x 15mm compression outlet (PREL107020).

Marking:

CR, flow arrow and P+C on body. RWC, CR, pressure and date of manufacture (DD/MM/YY) on cap

Installation Requirements:

R001 R120

Expiry date:

31/05/2030

Model:

PREL107015 (Preset at 6.0 bar), PREL107020 (Preset at 3.5 bar).

Approval Holder:

Reliance Worldwide Corporation (UK)

Company Name

Reliance Worldwide Corporation (UK)

Address

Horton Road, West Drayton

Postcode

UB7 8JL

Country

United Kingdom

Phone

+44 7730 052060

General Email

PETER.LANCASTER@RWC.COM

View All Listings by this Company

Manufacturer:

Reliance Worldwide Corporation (UK)

Company Name

Reliance Worldwide Corporation (UK)

Address

Horton Road, West Drayton

Postcode

UB7 8JL

Country

United Kingdom

Phone

+44 7730 052060

General Email

PETER.LANCASTER@RWC.COM

View All Listings by this Company

Range of pressure relief valves with gunmetal bodies and a lever operated easing gear. All have a pre-set pressure, ranging from 1.0 - 12.5 bar. Maximum operating temperature 95°C.

Section:

2210 Valves

Section Subtitle:

Pressure relief valve(s)

WRAS Approval Number:

250808701

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See models.

Marking:

NABIC, flow Arrow and size on body. Model and product info on data label.

Installation Requirements:

R001

Expiry date:

31/08/2030

Model:

Fig 500 – ½” – 2 ½” BSP, Fig 500F – DN20 – DN65.

Approval Holder:

Crane Ltd

Company Name

Crane Ltd

Address

Crane House, Epsilon Terrace, West Road, Ipswich

Postcode

IP3 9FJ

Country

United Kingdom

Phone

01473 277 364

General Email

tturner@cranebsu.com

View All Listings by this Company

Range of pre-set pressure relief valves with gunmetal bodies and a lever operated easing gear. Pre-set relief pressures: 1.0 bar to 10.5 bar. Maximum operating temperature 95°C.

Section:

2210 Valves

Section Subtitle:

Pressure relief valve(s)

WRAS Approval Number:

250808702

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See models.

Marking:

NABIC, flow Arrow and size on body. Model and product info on data label.

Installation Requirements:

R001

Expiry date:

31/08/2030

Model:

Fig 542 threaded: DN15-N-542-015 – ½” BSP, DN15-N-542-020 – ¾” BSP, DN15-N-542-025 – 1” BSP, DN15-N-542-032 – 1 ¼” BSP, DN15-N-542-040 – 1 ½” BSP, DN15-N-542-050 – 2” BSP, DN15-N-542-065 – 2 ½” BSP, DN15-N-542-080 – 3” BSP. Fig 542 F flanged: DN40-N-542F-032 – DN32, DN40-N-542F-040 – DN40, DN40-N-542F-050 – DN50, DN40-N-542F-065 – DN65, DN40-N-542F-080 – DN80.

Approval Holder:

Crane Ltd

Company Name

Crane Ltd

Address

Crane House, Epsilon Terrace, West Road, Ipswich

Postcode

IP3 9FJ

Country

United Kingdom

Phone

01473 277 364

General Email

tturner@cranebsu.com

View All Listings by this Company

Range of normally closed (NC), solenoid valves with plastic bodies and EPDM diaphragm. Models with push-fit connections are for use with copper pipe (manufactured to EN 1057) and PTFE pipe. The products incorporate a plastic or stainless steel filter on the inlet, (except for models with swivel nut, push-fit and nozzle inlets, as well as the 44.007.126 and 01.021.126 models) . The 44.007.126 model incorporates a Y-pattern stainless-steel strainer. Maximum working pressure 10.0 bar. Maximum operating temperatures: Cold water use only, 65°C or 90°C for models marked with ℗ - Please consult model section for further details.

Section:

2240 Valves

Section Subtitle:

Solenoid, plastic.

WRAS Approval Number:

250404711

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See model.

Marking:

AuK Muller, type (model), voltage, maximum water temperature (Tm 23°C, 65°C or 90°C as appropriate), date of manufacture WW/YY on adhesive label on coil. AuK Muller logo, flow arrow, pressure rating and model moulded on body. Models suitable for 90°C are also marked with a ℗ on the base of the body.

Installation Requirements:

R001 R008

Expiry date:

30/04/2030

Model:

Cold water use only models: 01.007.115: Inlet: G 3/8” (M), 01.021.126: Inlet: G 1” (M). 65°C models: 01.007.111: Inlet: G 1/2” (M); G 3/8”(M); G 3/4” (M), 01.007.115: Inlet: G 3/4” (M), 01.007.126: Inlet: G 1/2” (M); G 3/8” (M); G 3/4” (M); 3/8” Push-Fit; Ø 8 Push-Fit, 44.007.126: Inlet: G 1/2” (M); G 3/4” (M), 29.007.215: Inlet: G 1/2” (M); G 3/8” (M); G 3/4” (M), 01.010.115: Inlet: G 3/4" (M), 01.010.125: Inlet: G 3/4” (M); 3/4-11,5 NH (M), 01.010.126: Inlet: G 1/2” (M); G 3/8” (M); G 3/4” (M); 3/8” Nozzle; 3/8” Push-Fit; G 3/4” (F) ; 3/4-11,5 NH (F); G 1/2” (F), 01.010.215: Inlet: G 3/4” (M); 3/4-11,5 NH (M), 01.010.216: Inlet: G 3/4” (M); 3/4-11,5 NH (M), 01.010.225: Inlet: G 3/4” (M); 3/4-11,5 NH (M), 01.010.315: Inlet: G 3/4” (M), 01.010.325: Inlet: G 3/4” (M); 3/4-11,5 NH (M), 01.010.415: Inlet: G 3/4” (M), 01.010.425: Inlet: G 3/4” (M), 29.010.226: Inlet: G 3/4” (M), 29.010.326: Inlet: G 3/4” (M), 01.013.115: Inlet: G 3/4” (M), 01.013.126: Inlet: G 1/2” (M); G 3/4” (M); 3/4-11,5 NH (M), 01.013.215: Inlet: G 3/4” (M), 01.013.225: Inlet: G 3/4” (M); 3/4-11,5 NH (M), 01.017.126: Inlet: G 3/4” (M, 15.017.325: Inlet: G 3/4” (M); 3/4-11,5 NH (M), 15.017.425: Inlet: G 3/4” (M); 3/4-11,5 NH (M). 90°C models (marked with a ℗): 01.010.115: Inlet: G 1/2” (M); G 3/4 (M), 01.010.125: Inlet: G 3/4” (M), 01.010.126: Inlet: G 1/2” (M); G 3/8” (M); G 3/4” (M); G 3/4” (F); 3/4-11,5 NH (F); G 1/2” (F), 01.013.115: Inlet: G 3/4” (M), 01.013.126: Inlet: G 1/2” (M); G 3/4” (M); G 3/4” (F); 3/4-11,5 NH (F), 01.017.115: Inlet: G 3/4” (M), 01.017.126: Inlet: G 3/4” (M); 3/4-11,5 NH (M).

Approval Holder:

A.u.K. Müller GmbH & Co. KG

Company Name

A.u.K. Müller GmbH & Co. KG

Address

Dresdener Str. 162, D-40595 Düsseldorf

Country

Germany

Phone

+49 211 7391 0

General Email

info@akmueller.de

View All Listings by this Company

Manufacturer:

A.u.K. Müller GmbH & Co. KG

Company Name

A.u.K. Müller GmbH & Co. KG

Address

Dresdener Str. 162, D-40595 Düsseldorf

Country

Germany

Phone

+49 211 7391 0

General Email

info@akmueller.de

View All Listings by this Company

Range of press fit spherical valves with brass and chrome plated brass bodies. For use with copper pipe to BS EN 1057. Maximum working pressure 16.0 Bar Maximum operating temperature 85 °C.

Section:

2260 Valves

Section Subtitle:

Spherical valve(s) with metal body

WRAS Approval Number:

250512010

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See models

Marking:

Ningbo Jiekelong Precision Manufacturing Co., Ltd company logo and size on body.

Installation Requirements:

R001

Expiry date:

31/05/2030

Model:

52010-15 15mm 52010-22 22mm 52012-15 15mm 52016-15 15mm 52016-22 22mm 52007-15 15mm 52007-22 22mm 52007-28 28mm 52007-35 35mm 52007-42 42mm 52007-54 54mm 52008-15 15mm x 1/2" 52008-20 22mm x 3/4" 52008-25 28mm x 1" 52008-32 35mm x 1 1/4" 52008-40 42mm x 1 1/2" 52008-50 54mm x 2" 52009-15 15mm 52009-22 22mm 52009-28 28mm 52013-15 15mm x 3/4" 52017-15 15mm x 3/4" 52014-15 15mm x 15mm x 3/4" 52018-15 15mm x 1/2" 52015-15 15mm x 1/2"

Approval Holder:

Ningbo Jiekelong Precision Manufacturing Co., Ltd

Company Name

Ningbo Jiekelong Precision Manufacturing Co., Ltd

Address

No.1 Chengxi West Road Cicheng Town Ningbo Zhejiang

Country

China

View All Listings by this Company

Manufacturer:

Ningbo Jiekelong Precision Manufacturing Co., Ltd

Company Name

Ningbo Jiekelong Precision Manufacturing Co., Ltd

Address

No.1 Chengxi West Road Cicheng Town Ningbo Zhejiang

Country

China

View All Listings by this Company