Range of electronically controlled ion exchange water softeners (salt regenerated) for commercial and domestic use. Maximum working pressure 5.0 bar. Cold water use

Section:

2450 Water softeners

WRAS Approval Number:

2306080

Note:

When used within a domestic premises, IRN R150 applies. When used within a non-domestic or commercial premises, IRN R160 applies.

Size:

¾” BSP (M)

Marking:

Resideo on front body. Resideo, Company Information, model, serial number, temperature and other technical information on adhesive label inside front cover.

Installation Requirements:

R001 R150 R160 R170 R290 R415 R510

Expiry date:

30/06/2028

Model:

KS30E-60* & KS30I-60* 20 Litre water softener KS30I-80* 25 Litre water softener KS30E-30* & KS30I-60* 10 Litre water softener

Approval Holder:

Pittway Sarl

Company Name

Pittway Sarl

Address

A3 - ZA La Pièce 6 1180 Rolle

Country

Switzerland

View All Listings by this Company

'ABS 727 White'. White coloured, injection moulded ABS material. For use with water up to 65°C.

Section:

5020 Acrylonitrile Butadeine Styrene Copolymer (ABS)

Expiry date:

31/07/2028

Approval Holder:

Runner (Xiamen) Corp.

Company Name

Runner (Xiamen) Corp.

Address

No. 69, Tianfeng Road, Jimei District, Xiamen 631021

Country

China

View All Listings by this Company

'CER18635 Ceramic Ring'. White coloured (opaque), sintered, ceramic ring. For use with water up to 85°C.

Section:

5023 Ceramic

Expiry date:

31/08/2028

Approval Holder:

Shanghai YiPu Environmental Protection Technology Co., Ltd.

Company Name

Shanghai YiPu Environmental Protection Technology Co., Ltd.

Address

Room 321, Building 2, No 125 Laiting Road (S), Songjiang District, Shanghai

Country

China

View All Listings by this Company

'SIGMALINE 855 (11) Blue'. Factory applied, blue coloured, two-component polyurethane coating. 'SIGMALINE 855 (11) Blue' is for use with water up to 23°C. In September 2024 ‘SIGMALINE 855 (11) Off White’ was added to the approval. Off-white coloured two-component polyurethane coating. 'SIGMALINE 855 (11) Off White' is for use with water up to 36°C. Mix and apply as per manufacturer's Product Data Sheet ‘7656’, dated 'September 16, 2024'. Cure for 12 hours@20°C. These materials are only approved for the curing conditions that appear on the approval. If the cure conditions are varied from those specified on the approval then the materials are not covered by the scope of the approval.

Section:

5030 Coatings, Paints & Linings

Section Subtitle:

Factory applied pipe & fittings coatings.

WRAS Approval Number:

2307533

Expiry date:

31/07/2028

Approval Holder:

PPG Coatings Europe B.V.

Company Name

PPG Coatings Europe B.V.

Address

Oceanenweg 2, 1047 BB Amsterdam

Country

Netherlands

View All Listings by this Company

'Sheraplex Blue, Black, Green & Silver'. Factory applied, organic resin coating system, consisting of a primer and 'Delta Seal' topcoat (available in blue, black, green and silver colours). Apply one coat of primer (as per instructions: WI.BMC.W02 Issue 2 - February 2005) and cure for 2 and ½ hours at 380°C. Then apply a passivation layer through immersion for 15 minutes at 76-99°C (as per instructions: WI.BMC.W06 Issue 1 August 2004). Apply 1 topcoat of 'Delta Seal' (as per instructions WI.BMC.W01A Issue 2 August 2010) and cure for 20 minutes at 200°C. All are for use with water up to 23°C. This material is only approved for the curing conditions that appear on the approval. If the cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:

5030 Coatings, Paints & Linings

Section Subtitle:

Factory applied pipe & fittings coatings.

WRAS Approval Number:

2308525

Expiry date:

31/08/2028

Approval Holder:

Specialist Metallic Coatings Ltd (formerly Bodycote Surface Technology)

Company Name

Specialist Metallic Coatings Ltd (formerly Bodycote Surface Technology)

Address

Shakespeare Street Wolverhampton

Postcode

WV1 3LR

Phone

01902 452915

View All Listings by this Company