Range of ‘SureCal’ immersion heater elements incorporating brass or DZR heads with either a copper, stainless steel, alloy or titanium heating element and a black EPDM ‘O’-ring. Open outlet use only. Maximum operating temperature 99°C

Section:

1530 Miscellaneous Fittings

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

RT – 1.1/4” BSP (M) to 2.1/4” BSP (M) RF – 48 mm OD

Marking:

'SureCal' logo, Model, Voltage, Size and other information on label.

Installation Requirements:

R001

Expiry date:

30/09/2029

Model:

Model Code: XXYZS Where XX denotes the boss type and can be replaced with any of the following: RT = Thread Type RF = Flange Type Where Y denotes the heating tube material and can be replaced with any of the following: 1 = Copper 2 = AISI 304 / AISI 304L 3 = AISI 321 4 = AISI 316 / AISI 316L 5 = Alloy 800 / Alloy 825 / Alloy 840 6 = Titanium 7 = AISI 309S 8 = AISI 310 Where Z denotes the brazing system and can be replaced with any of the following: A = Tin Alloy B = Silver Alloy C = Itek Brazing Where S denotes the surface enamelling and can be replaced with either of the following: S = Enamelled Blank = Not Enamelled

Approval Holder:

Thermowatt S.p.A.

Company Name

Thermowatt S.p.A.

Address

Via San Giovanni Battista 21 Arcevia

Postcode

60011

Country

Italy

Phone

+39 0731988246

General Email

thermowatt@legalmail.it

View All Listings by this Company

Range of single and twin ended shower booster pumps with plastic bodies and plastic impellers. The inlets/outlets incorporate stainless steel braided EPDM lined flexible hose assemblies with isolation valves and stainless-steel strainers. The outlets incorporate approved check valve cartridges however, the complete product has not been fully tested to demonstrate it provides backflow protection. The Universal Twin models incorporate an expansion vessel. Maximum working pressure 1.5, 1.8, 2.0, 2.5, 2.6, 3.0 Bar (see model for more details). Maximum operating temperature: 60.0°C.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

250802702

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

15mm, 21mm or 22mm Push fit connections for use with copper pipe EN1057

Marking:

Salamander Pumps logo on body. Salamander Pumps and technical information on adhesive label on body

Installation Requirements:

R001 R150 R415

Expiry date:

31/08/2030

Model:

CT RANGE: CT50+XTRA 15mm, CT50XTRA 15mm, CT54XTRA 15mm, CT55+XTRA 15mm, CT55XTRA 15mm, CT59XTRA 15mm, CT75+XTRA 15mm, CT75XTRA 15mm, CT79XTRA 15mm, CT85+XTRA 15mm, CT85XTRA 15mm, CT89XTRA 15mm, CT60B 15mm, CT60BU 15mm, CT64HUXTRA 15mm, CT64HXTRA 15mm, CT80B 22mm, CT80BU 22mm, CT84HUXTRA 21mm, CT84HXTRA 21mm, CTFORCE15IPT 21mm, CTFORCE15ITU 21mm, CTFORCE15PT 22mm, CTFORCE15TU 22mm, CTFORCE20IPS 21mm, CTFORCE20IPT 21mm, CTFORCE20ISU 21mm, CTFORCE20ITU 21mm, CTFORCE20PT 22mm, CTFORCE20PS 22mm, CTFORCE20SU 22mm, CTFORCE20TU 22mm, CTFORCE30IPS 21mm, CTFORCE30IPT 21mm, CTFORCE30ISU 21mm, CTFORCE30ITU 21mm, CTFORCE30PS 22mm, CTFORCE30PT 22mm, CTFORCE30SU 22mm, CTFORCE30TU 22mm, ACTFORCE30SU 22mm. KEY: XTRA = Plastic Ended, B = Plastic Ended with Plastic Bypass, H = Plastic Ended with Plastic Bypass (Ireland), FORCE = Brass Ended, A = Manufactured for a separate company. U = Includes expansion vessel, P = No expansion vessel, T= Twin ended pump, S = Single ended pump, I = sold in Ireland, + = supplied with couplers with isolating valves. The XTRA models without a + come with couplers without isolating valves. The rest of the product ranges include isolating valves as standard. 50/54/55/59/15 = 1.5 Bar, 60/64 = 1.8 Bar, 75/79/20 = 2.0 Bar, 85/89 = 2.5 Bar 80/84 = 2.6 Bar, 30 = 3.0 Bar.

Manufacturer:

Salamander Pumps

Company Name

Salamander Pumps

Postcode

SR5 3XE

Country

United Kingdom

Phone

0191 535 4528

View All Listings by this Company

Range of multi-stage semiaxial submersible pumps with stainless steel bodies and impellers. Please note, this approval does not cover the motor, motor connection kit or power cable necessary for the pump to operate. Open outlet use only. Cold water use only.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

250504706

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

140 SX models: 3” GAS FLANGED outlet conenection, 180 SX models: 5” GAS FLANGED outlet conenection, 230 SX models: 6” GAS FLANGED outlet conenection, 270 SX models: DN200 FLANGED outlet conenection.

Marking:

Panelli logo, model type, serial no., made in Italy, production date (MM/YY) and other techical info on data plate on body.

Installation Requirements:

R001 R415

Expiry date:

31/05/2030

Proviso:

Open outlet use only.

Model:

140 SX 34/XX, 140 SX 44/XX, 140 SX 54/XX, 140 SX 64/XX, 180 SX 102/ XX, 180 SX 124/XX, 180 SX 140/XX, 180 SX 78/XX, 180 SX 90/XX, 230 SX 200/XX (DRXX), 230 SX 220/XX (DRXX), 230 SX 240/XX (DRXX), 230 SX 280/XX (DRXX), 270 SX 370/XX (DRXX), 270 SX 440/XX (DRXX) (A). Where: 140-180-230-270 = pump diameter. 140: 6”, 180: 8”, 230: 10”, 270: 12”. SX: Semi-axial pump family. 34-440: Flow. /XX = Number of stages (XX will be replaced by 1 or 2 digits as follows). 140 SX 34: 3 to 27, 140 SX 44: 3 to 22, 140 SX 54: 3 to 22, 140 SX 64: 1 to 18, 180 SX 102: 1 to 15, 180 SX 124: 1 to 13, 180 SX 140: 1 to 12, 180 SX 78: 1 to 19, 180 SX 90: 1 to 17, 230 SX 200: 1 to 9, 230 SX 220: 1 to 7, 230 SX 240: 1 to 7, 230 SX 280: 1 to 7, 270 SX 370: 1 to 5, 270 SX 440: 1 to 5. Optional: DRXX = Impeller diameter reduction in mm. XX can either be 10 or 20. A = Impeller with corner reduction.

Approval Holder:

Panelli S.r.l.

Company Name

Panelli S.r.l.

Address

Via Rana 63/65 Z.I D5 Spinetta Marengo

View All Listings by this Company

Manufacturer:

Panelli S.r.l.

Company Name

Panelli S.r.l.

Address

Via Rana 63/65 Z.I D5 Spinetta Marengo

View All Listings by this Company

Range of shower handsets with various plated plastic bodies. The product incorporates a stainless-steel sieve a flow regulator. Maximum working pressure: open outlet use only. Maximum operating temperature: 60.0°C

Section:

1650 Shower Outlets

Section Subtitle:

Shower head(s) and/or shower handset(s).

WRAS Approval Number:

250502010

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” BSP M.

Marking:

Hansgrohe on the spray plate.

Installation Requirements:

R001 R040

Expiry date:

31/05/2030

Model:

28 031 xx0 (8 L/min Flow Regulator), 28 032 xx0 (6 L/min Flow Regulator), 28 033 xx0 (8 L/min Flow Regulator), 28 034 xx0 (6 L/min Flow Regulator). Models added August 2025: 28 035 xx0 - Hansgrohe | Activera S - Hand shower 95 2jet EcoSmart with booster, 28 036 xx0 - Hansgrohe | Activera S - Hand shower 95 2jet EcoSmart+ with booster. Where xx0 denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.

Approval Holder:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, Schiltach

Postcode

77761

Country

Germany

Phone

+49 170 4471 718

General Email

Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Overhead shower outlets incorporating chrome plated plastic body. Stainless steel mesh strainer and a flow regulator (see models) in inlet connection. Open outlet use only Maximum operating temperature 75°C.

Section:

1650 Shower Outlets

Section Subtitle:

Shower head(s) and/or shower handset(s).

WRAS Approval Number:

250512016

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½ BSP (F)

Marking:

DELMEI on the ball joint nut

Installation Requirements:

R001 R040

Expiry date:

31/05/2030

Model:

SD1662/B952513AA/B952513XG with flow controller SD1662/B953328AA/B953328XG without flow controller

Approval Holder:

Xiamen Delmei Sanitary Ware Co Ltd

Company Name

Xiamen Delmei Sanitary Ware Co Ltd

Address

No. 700-702, Caotang Rd, Tong'an District, Xiamen China 361100

View All Listings by this Company