Directory Search Results

Print List

#240502057

‘Helvatron H2O’ range of ultrasonic water meters with brass bodies and EPDM ‘O’-rings. Maximum working pressure 16.0 bar. Maximum operating temperature 50°C.

Section:
1505 Water Meters
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
See model.
Marking:
Helvatron on cap. Helvatron and product info on meter face. Size and flow arrow on body.
Installation Requirements:
R001
Expiry date:
31/05/2029
Model:
Helvatron H2O range: H2O DN15 (port lengths 115 & 165mm): ¾” BSP (M) inlet/outlet, H2O DN20 (port lengths 130, 190 & 195mm): 1” BSP (M) inlet/outlet, H2O DN25 (port lengths 225 & 260mm): 1¼” BSP (M) inlet/outlet, H2O DN32 (port lengths 230 & 260mm): 1½” BSP (M) inlet/outlet, H2O DN40 (port lengths 245 & 300mm): 2” BSP (M) inlet/outlet.

Approval Holder:
Helvatron AG
Company Name
Helvatron AG
Address
JOCHLERWEG 2 CH-6340 BAAR SWITZERLAND

View All Listings by this Company

Print This Approval


#240402065

Range of submersible pressure sensors and hydrostatic transmitters (supplied in lengths up to 1000m). Cold water use only.

Section:
1530 Miscellaneous Fittings
Size:
Ø22mm or 32mm (see model).
Marking:
VEGA, VEGAWELL 52, model number and other product information on label connected to cable.
Installation Requirements:
R001
Expiry date:
30/04/2029
Model:
VEGAWELL 52 WL52.XX α A β γ I δ ε ζ X Where: XX :- Approval Blank/without (not applicable to model seeking WRAS approval). α :- Fastening / Material X4 :- Without GE :- Adjustable screw connection for suspension cable G¾ PN3, ISO228-1 / 316L. GC :- Adjustable screw connection for suspension cable G1 PN3, ISO228-1 / 316L. GD :- Adjustable screw connection for suspension cable 1NPT PN3, ASME B1.20.1 / 316L. GA :- Adjustable screw connection for suspension cable G1½ PN3, ISO228-1 / 316L. GB :- Adjustable screw connection for suspension cable 1½NPT PN3, ASME B1.20.1 / 316L. Version / Process temperature A :- Suspension cable PE / -20...+60°C β :- Length of suspension cable K :- 6m PE suspension cable. L :- 12m PE suspension cable. M :- 27m PE suspension cable. T :- Individually selected length PE suspension cable. γ :- Transmitter material / Diameter V :- 316l / 22mm. D :- Duplex (1.4462) / 32mm. Sealing concept / Wetted seal I :- Double / EPDM (A+P 70.10-02), EPDM (70.503-00) δ :- Measuring rate A :- rel. / 0 … +0.1 bar (0 … + 10kPa). B :- rel. / 0 … +0.2 bar (0 … + 20kPa). C :- rel. / 0 … +0.4 bar (0 … + 40kPa). D :- rel. / 0 … +1.0 bar (0 … + 100kPa). E :- rel. / 0 … +2.5 bar (0 … + 250kPa). F :- rel. / 0 … +5.0 bar (0 … + 500kPa). G :- rel. / 0 … +10 bar (0 … + 1,000kPa). H :- rel. / 0 … +25 bar (0 … + 2,500kPa). ε :- Electronics C :- Two-wire 4…20mA. D :- Two-wire 4…20mA/HART + Four-wire PT100. ζ :- Accuracy class 1 :- 0.2%, 2 :- 0.1%. Transmitter option X :- without.

Approval Holder:
VEGA Grieshaber KG
Company Name
VEGA Grieshaber KG
Address
Am Hohenstein 113 Schiltach
Postcode
77761
Country
Germany
General Email
info.de@vega.com

View All Listings by this Company

Print This Approval


#240504014

Range of concealed, wall mounted rough insets, incorporating cross-top and single lever operating members. Maximum working pressure 3.5 bar. Maximum operating temperature 60°C

Section:
1535 Miscellaneous
Section Subtitle:
Tap accessories.
WRAS Approval Number:
240504014
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
¾” BSP (F)
Marking:
THG stamped on body
Installation Requirements:
R001 R010 R040
Expiry date:
31/05/2029
Model:
40AC/W & 40AM/W

Approval Holder:
THG Paris
Company Name
THG Paris
Address
35 rue Tournière Béthencourt sur Mer
Postcode
80130
Country
France
Phone
+33 3.22.60.20.80
General Email
cvallee@thg.fr

View All Listings by this Company
Manufacturer:
THG Paris
Company Name
THG Paris
Address
35 rue Tournière Béthencourt sur Mer
Postcode
80130
Country
France
Phone
+33 3.22.60.20.80
General Email
cvallee@thg.fr

View All Listings by this Company

Print This Approval


#240504017

Spray handset for personal hygiene (brass bodied - various finishes) incorporating a trigger mechanism controlling the flow. The handset also has a locking ring. The inlet incorporates an approved check valve cartridge with an integral plastic flow regulator; however, the complete product has not been fully tested to demonstrate it provides backflow protection. The products are supplied with a shower hose. Model (5840/MBG/W) is supplied with a single lever trim set. Maximum working pressure 3.5 bar. Maximum operating temperature 60°C

Section:
1535 Miscellaneous
Section Subtitle:
Tap accessories.
WRAS Approval Number:
240504017
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
½” BSP (M)
Marking:
THG laser etched on wall mounted bracket
Installation Requirements:
R001 R070 R415
Expiry date:
31/05/2029
Model:
5840/9/W & 5840/MBG/W

Approval Holder:
THG Paris
Company Name
THG Paris
Address
35 rue Tournière Béthencourt sur Mer
Postcode
80130
Country
France
Phone
+33 3.22.60.20.80
General Email
cvallee@thg.fr

View All Listings by this Company

Print This Approval


#240504018

Spray handset for personal hygiene (brass bodied - various finishes) incorporating a trigger mechanism controlling the flow. The handset also has a locking ring. The inlet incorporates an approved check valve cartridge with an integral plastic flow regulator; however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 3.5 bar. Maximum operating temperature 60°C.

Section:
1535 Miscellaneous
Section Subtitle:
Tap accessories.
WRAS Approval Number:
240504018
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
½” BSP (M).
Marking:
THG etched on Body
Installation Requirements:
R001 R070 R415
Expiry date:
31/05/2029
Model:
G00-XXX-4270B/W. Where XXX denotes finishes and can be replaced by: A02-Polished Chrome, A13-Smoked Brass, B01-Polished Nickel, C01-Matte Nickel, C02-Matte Chrome, C27-Unlacquered Brass, C47-Smoked Nickel, D01-Light Bronze Lacquered, D05-Lacquered Matte Bronze, D10-USA Oil-Rubbed Bronze, D12-Polished Brass Lacquered, D15-Polished Black Lacquered, D16-White Lacquered, D18-Matte Black lacquered, D21-Old Oil-Rubbed Bronze, D24-Aranja, H17-Matt Aranja, F01-Polished Gold, F07-Matte Gold, F18-Rhodium Silver, F19-Matt Rhodium Silver, F27-Rose Gold, F30-Soft Gold, F31-Matte Soft Gold, F33-Brown Bronze PVD, F34-Matte Brown Bronze PVD, G01-Polished Nickel/Polished Gold, G02-Polished Chrome/Polished Gold, H03-Lacquered Antique Silver, H07-Varnished Matte Antique Red Copper, H08-Lacquered Matte Antique Silver, H24-Lacquered Antique Copper, H28-Antique Nickel, H49-Brass PVD, H50-Matte Brass PVD, H52-Gold PVD, H53-Matte Gold PVD, H55-Nickel PVD, H56-Matte Nickel PVD, H60-Matte Blush PVD, H62-Blush PVD, H64-Graphite PVD, H65-Matte Graphite PVD, H66-Umber PVD, H67-Matte Umber PVD

Approval Holder:
THG Paris
Company Name
THG Paris
Address
35 rue Tournière Béthencourt sur Mer
Postcode
80130
Country
France
Phone
+33 3.22.60.20.80
General Email
cvallee@thg.fr

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 686 of 1306

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.