'ZX-9 Fusion Bonded Epoxy Powder Coating Blue & Red'. Factory applied, blue or red coloured epoxy coatings. Apply as per manufacturer's TDS 'ZX-9-HX' dated '2025.4.25'. Cure for 10 minutes@200°C. For use with water up to 85°C. This material is only approved for the curing conditions that appear on the approval. If the curing conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:

5030 Coatings, Paints & Linings

Section Subtitle:

Factory applied pipe & fittings coatings.

WRAS Approval Number:

240455066

Expiry date:

30/04/2029

Approval Holder:

Anhui Redstar Valve Co., Ltd.

Company Name

Anhui Redstar Valve Co., Ltd.

Address

855# Qifeng Road, ShiZiShan Economic Development Zone, Tongling city, Anhui province

Country

China

View All Listings by this Company

'VETOPROOF EC720'. Site applied, grey coloured, two-part epoxy coating. Mix parts A and B in a 84.8:15.2 weight ratio and apply three coats as per manufacturer's Method Statement 'MoS-SA-G1104-M-AK-09-23', dated '18 September 2023'. Cure first coat for 24 hours at 23°C, second coat for 24 hours at 23°C and third coat for 7 days at 23°C. For use with water up to 23°C. This material is only approved for the mixing and curing conditions that appear on the approval. If the mixing and/or curing conditions are varied from those specified on the approval then the materials are not covered by the scope of the approval.

Section:

5042 Coatings, Paints & Linings

Section Subtitle:

Site applied pipe and fittings coatings. Compliance with BS6920 relates to the conditions of cure specified in the listing. If the cure conditions are varied from those described below then compliance with BS6920 cannot be assummed without further testing. Where catalysts are required, only tested catalysts in the recommended concentrations should be used. Manufacturer's advice must be sought if any non standard mixing or curing conditions are being considered.

WRAS Approval Number:

250455038

Expiry date:

30/04/2030

Approval Holder:

Saudi Vetonit Co. Ltd. (SAVETO)

Company Name

Saudi Vetonit Co. Ltd. (SAVETO)

Address

PO Box 52235, Riyadh 11563

Country

Saudi Arabia

View All Listings by this Company

'VETOPROOF EC722'. Site applied, grey coloured, two-part epoxy coating. Mix parts A and B in a 85.4:14.6 weight ratio and apply three coats as per manufacturer's Method Statement 'MoS-SA-G1101-M-AK-09-23', dated '18 September 2023'. Cure first coat for 24 hours at 23°C, second coat for 24 hours at 23°C and third coat for 7 days at 23°C. For use with water up to 23°C. This material is only approved for the mixing and curing conditions that appear on the approval. If the mixing and/or curing conditions are varied from those specified on the approval then the materials are not covered by the scope of the approval.

Section:

5042 Coatings, Paints & Linings

Section Subtitle:

Site applied pipe and fittings coatings. Compliance with BS6920 relates to the conditions of cure specified in the listing. If the cure conditions are varied from those described below then compliance with BS6920 cannot be assummed without further testing. Where catalysts are required, only tested catalysts in the recommended concentrations should be used. Manufacturer's advice must be sought if any non standard mixing or curing conditions are being considered.

WRAS Approval Number:

250455039

Expiry date:

30/04/2030

Approval Holder:

Saudi Vetonit Co. Ltd. (SAVETO)

Company Name

Saudi Vetonit Co. Ltd. (SAVETO)

Address

PO Box 52235, Riyadh 11563

Country

Saudi Arabia

View All Listings by this Company

'Fortron ICE 504L SD 3039 black (DW)'. Black coloured, injection moulded PPS material. For use with water up to 85°C.

Section:

5255 Polyphenylene Sulphide (PPS)

Expiry date:

31/07/2030

Approval Holder:

Celanese Sales Germany GmbH

Company Name

Celanese Sales Germany GmbH

Address

Am Unisys Park 1, 65843 Sulzbach am Taunus

Country

Germany

View All Listings by this Company

'Lubricomp CX94108-GYDKNAT'. Dark grey coloured, injection moulded Polystyrene material. For use with water up to 85°C.

Section:

5270 Polystyrene

Section Subtitle:

Material only. Components made from materials listed in this section may be required to be submitted for audit tests.

WRAS Approval Number:

250355080

Expiry date:

31/03/2030

Approval Holder:

SHPP B.V.

Company Name

SHPP B.V.

Address

Plasticslaan 1, 4612PX, Bergen Op Zoom

Country

Netherlands

View All Listings by this Company