Range of double regulating valves incorporating bronze bodies, brass disc face (½” - ¾” models) or PTFE (1” - 2” models), PTFE plate and NBR ‘O’-rings. Maximum working pressure 25.0 bar. Maximum operating temperature 100°C.

Section:

2348 Valves

Section Subtitle:

Balancing.

WRAS Approval Number:

2201820

Size:

½” BSP (F) - 2” BSP (F)

Marking:

ICV ON OPERATING MEMBER ICV, SIZE, FLOW ARROW & DN25 ON BODY

Installation Requirements:

R001

Expiry date:

31/01/2027

Model:

908/02 DOUBLE REGULATING VALVES

Product Images

Approval Holder:

IC VALVES (NANJING) CO.,Ltd

Company Name

IC VALVES (NANJING) CO.,Ltd

Address

Room 1702, Changfa Centre 300 East Zhongshan Road Nanjiing

Country

Jiangsu Province

View All Listings by this Company

Range of commercial front loading washing machines with flow controlled by solenoid valve and discharged via a type AD air gap arrangement (verified by test - suitable for backflow protection against fluid category 5). The product is supplied with a single check valve assembly (suitable for backflow protection against Fluid Category 2) and PEX lined rubber inlet connections hoses. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C

Section:

2370 Washing Machines

Section Subtitle:

Clothes. Washing machines in this section will indicate the category of backflow prevention built into each appliance. The location and the use of the washing machine will determine any additional backflow protection that may be required.

WRAS Approval Number:

2201082

Size:

¾” BSP captive nut (to inlet hoses)

Marking:

GIRBAU on soap draw.

Installation Requirements:

R001

Expiry date:

31/01/2027

Model:

WM75.C & WM85.C

Product Images

Approval Holder:

Girbau S.A.

Company Name

Girbau S.A.

Address

Carretera de Manlleu, KM 1, Vic

Postcode

08500

Country

Spain

Phone

+34659242864

General Email

jsana@girbau.com

View All Listings by this Company

Range of UV disinfection units with stainless steel bodies and quartz tube. Maximum working pressure 10.0 bar. Cold water use only.

Section:

2411 Disinfection Equipment

Size:

¾” to 1½” BSP (M) based on model

Marking:

Daro, serial number and model number on adhesive label on fitting body and control unit

Installation Requirements:

R001 R120 R150 R170 R290

Expiry date:

30/04/2027

Model:

Saphir1, Saphir1+, Saphir1Pro. Saphir2, Saphir2+, Saphir2Pro. Saphir3, Saphir3+, Saphir3Pro. Saphir4, Saphir4+, Saphir4Pro. Saphir7, Saphir7+, Saphir7Pro. Saphir10, Saphir10+, Saphir10Pro.

Product Images

Approval Holder:

Daro UV Systems

Company Name

Daro UV Systems

Address

Unit 9 Ballingdon Hill Industrial Estate, Sudbury, Suffolk

Postcode

CO10 1GE

Country

United Kingdom

Phone

01787370187

General Email

info@darouv.co.uk

View All Listings by this Company

'Delrin® FG511DP NC010'. White coloured, injection moulded semi-opaque acetal material. For use with water up to 85°C.

Section:

5015 Acetal

Section Subtitle:

Material only. Components made from materials listed in this section may be required to be submitted for audit tests.

WRAS Approval Number:

2206502

Expiry date:

30/06/2027

Approval Holder:

Delrin Switzerland Sàrl

Company Name

Delrin Switzerland Sàrl

Address

154-156 route du Nant d’Avril, CH-1217 Meyrin

Country

Switzerland

View All Listings by this Company

'SOLID-02'. Factory applied, black coloured, bituminous coating. Apply as per manufacturer's user instructions 'File No.: SOLID-0069, Vison: SLD-03, Date of issue: 2015-01-01'. Cure for 2 hours @60°C. For use with water up to 23°C. This material is only approved for the curing conditions that appear on the approval. If the cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:

5021 Bituminous Based Products

Section Subtitle:

Petroleum or asphaltic bitumen, NOT coal tar bitumen. Materials containing petroleum or asphaltic bitumen are not approved for use on water-retaining structures with large surface:volume ratio such as lining of pipes, cisterns or water storage tanks in contact with wholesome water, but may be acceptable for use where there is only a small surface area in contact with the water – e.g. taps, valves and pipe connectors.

WRAS Approval Number:

2205506

Expiry date:

31/05/2027

Approval Holder:

Shanxi Solid Industrial Co., Ltd.

Company Name

Shanxi Solid Industrial Co., Ltd.

Address

28F, No.8 Changxing South Street, Jinyuan District, Taiyuan, Shanxi

Country

China

View All Listings by this Company