Directory Search Results

Print List

#2012051

Range of wall mounted combination boilers providing domestic hot water via a plate heat exchanger and pressurised central heating system, incorporating a pressure relief valve set at 3.0 bar and expansion vessel on the primary circuit. The inlet of the replenishing valve between the primary and secondary circuits incorporate a plastic strainer. Maximum working pressure 2.5 bar (primary) and 6.0 bar (secondary). Maximum operating temperature 85˚C.

Section:
1465 Heaters
Section Subtitle:
Combination boilers and Water Jacketed Tube heaters. Low volume water content. Heat retained in water heaters will cause expansion of water after closure of draw-off taps and valves. Provision for expansion of water must be made to accommodate excess pressure within the system. Particular care is required where check valves are positioned, or loose jumper valves are thought to be upstream of the heater.
WRAS Approval Number:
2012051
Note:
Please note that the inlet pipework connects to the flow sensor, no fittings or valves prior to this are supplied. Not supplied with a temporary filling loop. A filling loop must be installed with the appropriate backflow prevention device in accordance with Schedule 2 paragraph 7 of the Water Supply (Water Fittings) Regulations 1999.
Size:
½” BSP (M) inlet and outlet Secondary Circuit. ½” BSP (M) replenishing valve. ¾” BSP(M) inlet and outlet primary circuit.
Marking:
Strom on front of body. Model and technical info on adhesive label on side of body.
Installation Requirements:
R001 R140 R360
Expiry date:
31/12/2025
Model:
Strom E range comprising of models: SBSP7C, SBSP11C & SBSP15C. SBTP18C, SBTP21C & SBTP24C. The number in model indicates kW rating.

Approval Holder:
STROM LTD
Company Name
STROM LTD

View All Listings by this Company

Print This Approval


#2012341

Range of flow sensors with brass bodies. Maximum working pressure 16.0 bar. Maximum operating temperature 90°C

Section:
1530 Miscellaneous Fittings
Size:
¾” BSP (M).
Marking:
Sika, part number and other information on adhesive label on cable. Flow arrow on body
Installation Requirements:
R001
Expiry date:
31/12/2025
Model:
Flow sensors type series VTY15 Models: VY1545abcdefgh ab:for body material (MA = Brass CW617N-DW, MK = Brass CW724R, K5 = without body, only the internal turbine system) cd: for sensor and signal output (HN = Hall sensor-NPN, 00 = without sensor) ef: for electrical cable connection (various - in combination can be 00…99 or AA…ZZ, examples 05 = 500mm, 12=1200mm, X1=80mm with Molex plug connector) gh: for process connection (A4 = G3/4 male thread, YY = without, only possible with ab = K5) VY1545abyyyyyzz ab: for body material (MA = Brass CW617N-DW, MK = Brass CW724R, K5 = without body, only the internal turbine system) yyyyy: for name of customer (5 digits, e.g. SCHMI, MUELL, …) zz: for consecutive number (2 digits, 01…99)
Product Images

Approval Holder:
SIKA Systemtechnik GmbH
Company Name
SIKA Systemtechnik GmbH
Address
Struthweg 7-9 Kaufungen
Postcode
34260
Country
Germany
Phone
+49 5605 803 652
General Email
grass@sika.net

View All Listings by this Company
Manufacturer:
SIKA Systemtechnik GmbH
Company Name
SIKA Systemtechnik GmbH
Address
Struthweg 7-9 Kaufungen
Postcode
34260
Country
Germany
Phone
+49 5605 803 652
General Email
grass@sika.net

View All Listings by this Company

Print This Approval


#2012053

Range of isolation valves incorporating brass bodies and EPDM ‘O’-rings. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
1535 Miscellaneous
Section Subtitle:
Tap accessories.
WRAS Approval Number:
2012053
Size:
SEE MODEL
Marking:
Delabie on valve body (855755). Delabie on washer (855755UK).
Installation Requirements:
R001
Expiry date:
31/12/2025
Model:
855755 Eccentric coupling STOP CHECK ½” BSP (M) x ¾” BSP (M) Offset Union 855755UK In-line STOP CHECK ½” BSP (M) x ¾” BSP (M)
Product Images

Approval Holder:
Delabie UK Ltd.
Company Name
Delabie UK Ltd.
Address
18,rue du Maréchal Foch Friville Escarbotin
Postcode
80210
Country
France
General Email
sebastien.spriet@delabie.fr

View All Listings by this Company
Manufacturer:
Delabie UK Ltd.
Company Name
Delabie UK Ltd.
Address
18,rue du Maréchal Foch Friville Escarbotin
Postcode
80210
Country
France
General Email
sebastien.spriet@delabie.fr

View All Listings by this Company

Print This Approval


#2106803

Range of inline circulating pumps with bronze bodies, plastic impeller and EPDM rubber seals. Maximum working pressure 10.0 bar. Maximum operating temperature 100°C.

Section:
1610 Pumps
Section Subtitle:
Wholesome water use.
WRAS Approval Number:
2106803
Size:
Please refer to model.
Marking:
WILO, PN, flow arrow, serial number, date of manufacture (YYWW) and other technical information on body.
Installation Requirements:
R001
Expiry date:
30/06/2026
Model:
STAR-Z 20/1 - 1” BSP (M). STAR-Z 25/2 - 1½” BSP (M). STAR-Z 20/2-3(15-130) - 1” BSP (M). STAR-Z 20/4-3(150) - 1¼” BSP (M). STAR-Z 20/5-3(150) - 1¼” BSP (M). STAR-Z 25/6 - 1½” BSP (M). STAR-Z 20/7-3(150) - 1¼” BSP (M). STAR-ZD 25/6 - 1½” BSP (M).

Approval Holder:
Wilo
Company Name
Wilo
Address
80 BD de I'industrie, BP0527 - 53005 Laval, Cedex
Country
France

View All Listings by this Company

Print This Approval


#2011357

Dutypoint ‘VS’ range of cold water supply booster sets, incorporating 2 to 8 pumps with a modular stainless steel manifold system. The booster sets also incorporate spherical valves, non-return valves, pressure switches/sensors and expansion vessels.. Maximum working pressure 10.0 bar. Cold water use only.

Section:
1610 Pumps
Section Subtitle:
Wholesome water use.
WRAS Approval Number:
2011357
Size:
DN80 flanged inlet/outlet.
Marking:
Dutypoint logo, model no, serial no, company address and other technical information on control box.
Expiry date:
30/11/2025
Model:
VS(i)-(ii)-(iii)(iv)(v) VS = Product range prefix (i) = Number of pumps: 2, 3, 4, 6 or 8 (6 and 8 pump variants will be 2 x 3 pump units or 2 x 4 pump units coupled together). (ii) = Pump Model (4 digits): 3040, 3060, 3080, 3100, 5040, 5060, 5080, 5100, 9040, 9060, 9070 & 9090. (iii) Motor kW size (multiplied by 10): 005, 007, 011, 015, 022, 030. (iv) Power supply type: M (single phase) or T (three phase). Model code example: VS4-9090-030T.
Product Images

Approval Holder:
Dutypoint Ltd.
Company Name
Dutypoint Ltd.
Address
Unit A, Quedgeley West Business Park, Hardwicke, Gloucester
Postcode
GL2 4PA
Country
United Kingdom
Phone
01452313334
General Email
austin.hill@dutypoint.com

View All Listings by this Company
Manufacturer:
Dutypoint Ltd.
Company Name
Dutypoint Ltd.
Address
Unit A, Quedgeley West Business Park, Hardwicke, Gloucester
Postcode
GL2 4PA
Country
United Kingdom
Phone
01452313334
General Email
austin.hill@dutypoint.com

View All Listings by this Company

Print This Approval


#2011067

Range of positive displacement diaphragm pumps with plastic bodies, EPDM ‘O’-rings and TPE diaphragm. The product incorporates an integral bypass relief valve. For use with John Guest LLDPE Pipe. Maximum working pressure 11.03 Bar (Bypass) and 7.0 Bar (Operating).

Section:
1610 Pumps
Section Subtitle:
Wholesome water use.
WRAS Approval Number:
2011067
Size:
¼” Push fit.
Marking:
AQUATEC and flow arrow on body.
Installation Requirements:
R001
Expiry date:
30/11/2025
Model:
584X-2X0W (without motor). 584X-2X0W-XXXX (with motor) Model Code Denotes: 1st & 2nd designators = 58 - Series Demand Delivery Pumps. 3rd designator is port size for pumphead housing, where ‘4’ = ¼”. 4th designator is cam angle for flow performance variation only. X can be 0 to 9. 5th designator ‘2’ indicates that pump has bypass relief control. 6th designator is for pressure setting of relief valve. X can be A to Z depending on pressure setting. 7th designator ‘0’ is a code for the specific materials in this model, e.g. Nylon pumphead housing. 8th designator ‘W’ = WRAS Compliant 9th - 12th designators XXXX can be any alphanumeric characters to denote electrical motor and motor mounting base plate combination.
Product Images

Approval Holder:
Aquatec International Inc
Company Name
Aquatec International Inc
Address
17422 Pullman Street, Irvine, CA 92614, U.S.A.

View All Listings by this Company
Manufacturer:
Aquatec International Inc
Company Name
Aquatec International Inc
Address
17422 Pullman Street, Irvine, CA 92614, U.S.A.

View All Listings by this Company

Print This Approval


#2012066

Range of overhead shower outlets with chromium plated plastic bodies. Models SD1062 and SD1064 incorporate stainless steel strainers in the inlets. Maximum working temperature 75°C.

Section:
1650 Shower Outlets
Section Subtitle:
Shower head(s) and/or shower handset(s).
WRAS Approval Number:
2012066
Note:
For open outlet use only.
Size:
½” BSP (F)
Marking:
Delmei on front of shower head (models SD1044 & SD1061) Delmei on back of shower head (models SD1062 & SD1064)
Installation Requirements:
R001 R040
Expiry date:
31/12/2025
Model:
SD1044 SD1061 SD1062 SD1064
Product Images

Approval Holder:
Xiamen Delmei Sanitary Ware Co Ltd
Company Name
Xiamen Delmei Sanitary Ware Co Ltd
Address
No. 700-702, Caotang Rd, Tong'an District, Xiamen China 361100

View All Listings by this Company
Manufacturer:
Xiamen Delmei Sanitary Ware Co Ltd
Company Name
Xiamen Delmei Sanitary Ware Co Ltd
Address
No. 700-702, Caotang Rd, Tong'an District, Xiamen China 361100

View All Listings by this Company

Print This Approval


#2012074

A self-closing shower handset with a plastic body, the inlet incorporates a plastic flow restrictor and an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 6.0 bar. Maximum operating temperature 85 °C.

Section:
1650 Shower Outlets
Section Subtitle:
Shower head(s) and/or shower handset(s).
WRAS Approval Number:
2012074
Size:
½” BSP male
Marking:
ARJO and model on side of body
Installation Requirements:
R001 R040
Expiry date:
31/12/2025
Model:
6303122

Approval Holder:
ArjoHuntleigh AB
Company Name
ArjoHuntleigh AB
Address
Hans Michelsensgatan 10 SE-211 20 Malmo

View All Listings by this Company
Manufacturer:
ArjoHuntleigh
Company Name
ArjoHuntleigh
Address
Cesta Simona Blatnika 11 3320 Velenje

View All Listings by this Company

Print This Approval


#2012343

Range of shower handsets with chromium plated plastic bodies. Maximum operating temperature 75°C.

Section:
1650 Shower Outlets
Section Subtitle:
Shower head(s) and/or shower handset(s).
WRAS Approval Number:
2012343
Note:
Open outlet use only.
Size:
½” BSP (M)
Marking:
Xihe on body.
Installation Requirements:
R001 R040
Expiry date:
31/12/2025
Model:
S34011 & S06041
Product Images

Approval Holder:
Fujoam Xihe Sanitary Ware Technology Co. Ltd.
Company Name
Fujoam Xihe Sanitary Ware Technology Co. Ltd.

View All Listings by this Company
Manufacturer:
Fujoam Xihe Sanitary Ware Technology Co. Ltd.
Company Name
Fujoam Xihe Sanitary Ware Technology Co. Ltd.

View All Listings by this Company

Print This Approval


#2012351

Shower handset incorporating a chromium plated plastic body. Maximum operating temperature 65°C.

Section:
1650 Shower Outlets
Section Subtitle:
Shower head(s) and/or shower handset(s).
WRAS Approval Number:
2012351
Note:
Open outlet use only.
Size:
½” BSP (M)
Marking:
Triton on body.
Installation Requirements:
R001 R040
Expiry date:
31/12/2025
Model:
88500103
Product Images

Approval Holder:
Triton Showers
Company Name
Triton Showers
Address
Triton Road, Nuneaton, Warwickshire
Postcode
CV11 4NR
Country
United Kingdom
Phone
02476 324423
General Email
paulrowley@tritonshowers.co.uk

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 67 of 1128

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.