Nylon and stainless-steel braided EPDM lined flexible hose assemblies. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C

Section:

1863 Tubes

Section Subtitle:

Elastomeric.

WRAS Approval Number:

241002078

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

Please refer to models.

Marking:

Hualing logo, WRAS and date of manufacture (YYYY) on ferrule

Installation Requirements:

R001

Expiry date:

31/10/2029

Model:

HL-SS-XX-XX-XXX-XXX SS=Stainless Steel Braided Hose XX: Connection sizes: 01=F3/8 02=F1/2 03=F3/4 04=F15*1 05=M3/8 06=M1/2 07=M3/4 08=M15 09=M12 10=M10 11=M8 12=Pushfit 11mm ID or 11mm OD Note: Connection 01, 02, 04, 05, 06, 08, 09, 10, 11, 12 applicable for DN6. Connection 01, 02, 03, 04, 05, 06, 07, 08, 09, 10, 11, 12 applicable for DN8. Connection 01, 02, 03, 04, 05, 06, 07, 08 applicable for DN10. Connection 02, 03, 06, 07 applicable for DN14. 1st XXX: Hose inner size: 006= DN6, 008= DN8, 010= DN10, 014= DN14. 2nd XXX: Hose length: 15CM - 200CM. HL-N-XX-XX-XXX-XXX N=Nylon Pull out Hose. XX: Connection sizes: 01=F3/8 02=F1/2 08=M15 09=M12 10=M10 11=M8 12=Pushfit 11mm OD 1st XXX: Hose inner size: 006= DN6, 008= DN8. 2nd XXX: Hose length: 15CM - 200CM.

Approval Holder:

Kaiping City Hualing Hoses Co Ltd

Company Name

Kaiping City Hualing Hoses Co Ltd

Address

No. 42 Jinshan Road Shagang Industrial Park Shuikou Town

Country

Kaiping City

View All Listings by this Company

Manufacturer:

Kaiping City Hualing Hoses Co Ltd

Company Name

Kaiping City Hualing Hoses Co Ltd

Address

No. 42 Jinshan Road Shagang Industrial Park Shuikou Town

Country

Kaiping City

View All Listings by this Company

Range of stainless steel braided hoses with EPDM liner and NBR or fibre gaskets. DN13 and DN19 Maximum working pressure 10 bar. Maximum operating temperature 65°C. DN25 Maximum working pressure 10 bar. Cold water use only.

Section:

1863 Tubes

Section Subtitle:

Elastomeric.

WRAS Approval Number:

240704037

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

see model

Marking:

APL, Date of manufacture (YYYY) and WRAS stamped on ferrule.

Installation Requirements:

R001

Expiry date:

31/07/2029

Model:

H786 13mm stainless steel braided hose 3/4" F STR x 3/4" F BENT 1.5m H782 13mm stainless steel braided hose 3/4" F STR x 3/4" F BENT 1.25m H783 13mm stainless steel braided hose 3/4" F STR x 3/4" F BENT 1.0m H784 13mm stainless steel braided hose 3/4" F STR x 3/4" F BENT 0.75m H785 13mm stainless steel braided hose 3/4" F STR x 3/4" F BENT 0.5m H980 13mm stainless steel braided hose 3/4" F BENT x 3/4" F BENT 1.5m H979 13mm stainless steel braided hose 3/4" F BENT x 3/4" F BENT 1.25m H978 13mm stainless steel braided hose 3/4" F BENT x 3/4" F BENT 1.0m H977 13mm stainless steel braided hose 3/4" F BENT x 3/4" F BENT 0.75m H976 13mm stainless steel braided hose 3/4" F BENT x 3/4" F BENT 0.5m H775 19mm stainless steel braided hose 3/4" F STR x 3/4" F BENT 1.5m H769 19mm stainless steel braided hose 3/4" F STR x 3/4" F BENT 1.25m H772 19mm stainless steel braided hose 3/4" F STR x 3/4" F BENT 1.0m H773 19mm stainless steel braided hose 3/4" F STR x 3/4" F BENT 0.75m H774 19mm stainless steel braided hose 3/4" F STR x 3/4" F BENT 0.5m H981 19mm stainless steel braided hose 3/4" F BENT x 3/4” F BENT 1.5m H829 19mm stainless steel braided hose 3/4" F BENT x 3/4" F BENT 1.25m H830 19mm stainless steel braided hose 3/4" F BENT x 3/4" F BENT 1.0m H831 19mm stainless steel braided hose 3/4" F BENT x 3/4" F BENT 0.75m H832 19mm stainless steel braided hose 3/4" F BENT x 3/4" F BENT 0.5m H984 25mm stainless steel braided hose 1” F STR x 1” F BENT 1.5m H767 25mm stainless steel braided hose 1” F STR x 1” F BENT 1.25m H833 25mm stainless steel braided hose 1” F STR x 1” F BENT 1.0m H768 25mm stainless steel braided hose 1” F STR x 1” F BENT 0.75m H989 25mm stainless steel braided hose 1” F BENT x 1” F BENT 1.5m H988 25mm stainless steel braided hose 1” F BENT x 1” F BENT 1.25m H987 25mm stainless steel braided hose 1” F BENT x 1” F BENT 1.0m H986 25mm stainless steel braided hose 1” F BENT x 1” F BENT

Product Images

Approval Holder:

Aquamatic Products Limited

Company Name

Aquamatic Products Limited

Address

3A & 3B Dakota Business Park, Dakota Way, Burscough, West Lancashire

Postcode

L40 8AF

View All Listings by this Company

Manufacturer:

Aquamatic Products Limited

Company Name

Aquamatic Products Limited

Address

3A & 3B Dakota Business Park, Dakota Way, Burscough, West Lancashire

Postcode

L40 8AF

View All Listings by this Company

Range of stainless steel or brass double interlocking, TPS lined flexible hose assemblies (various finishes) incorporating EPDM gaskets. Maximum operating temperature 60°C. Open Outlet Use Only

Section:

1863 Tubes

Section Subtitle:

Elastomeric.

WRAS Approval Number:

240602065

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See model

Marking:

Dolphin logo on end connections

Installation Requirements:

R001

Expiry date:

30/06/2029

Model:

Model Code: Dolphin Blue DB30abb.ccc.d.eee a’ indentifies the material type of the metal interlocked hose and threaded end connectors; these codes can be: o DB303bb. for brass material o DB304bb. for stainless steel material  ‘bb’ identifies the type of fitting/threaded connector at either end of the hose ranging from DB30a1. to DB30a11. Can be either one or two digits.  ‘ccc’ identifies the length range of the metal interlocked hose from 500mm ‘DB30abb.050’ to 2000mm ‘DB30abb.200’  ‘d’ identifies the external finish to the metal parts from ‘DB30abb.ccc.1 to DB30ab.ccc.9’: o ‘.1’ denotes brushed/satin polished o ‘.2’ denotes mirror polished o ‘.3’ denotes brushed/satin polished with PVD coating o ‘.4’ denotes mirror polished with PVD coating o ‘.5’ denotes powder coated o ‘.6 - .9’ to denote other material and finish options that may be available in the future  ‘eee’ indicates the colour of PVD or powder coat that has been applied from ‘DB30abb.ccc.d.00’ to ‘DB30abb.ccc.d.999’. Can be either two or three digits.

Product Images

Approval Holder:

Dolphin Solutions Limited

Company Name

Dolphin Solutions Limited

Address

Southpoint Compass Park Bodiam East Sussex

Postcode

TN32 5BS

Country

United Kingdom

View All Listings by this Company

Range of automatic air venting valves with plastic bodies and EPDM ‘O’-rings. Maximum working pressure 6.0 bar. Maximum operating temperature 99°C.

Section:

1980 Valves

Section Subtitle:

Air venting. Fittings in this section are suitable for above ground installations only.

WRAS Approval Number:

240504023

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See models.

Marking:

Caleffi logo moulded on cap.

Installation Requirements:

R001 R200

Expiry date:

31/05/2029

Model:

49513: 20.9mm pushfit manifold, C502433 CST: ⅜” BSP (M), C502600 CST: 19.9mm pushfit manifold, C502601 CST: 20.9mm pushfit manifold, C502604 PLY: 17.7mm pushfit manifold, C502630 CST: ⅜” BSP (M), C502631 CST: ⅜” BSP (M), C502633 CST: ⅜” BSP (M), C502640 CST: ½” BSP (M), C502644 CST: ½” BSP (M), C502634 CST: ⅜” BSP (M).

Product Images

Approval Holder:

Caleffi S.p.A

Company Name

Caleffi S.p.A

Address

Strada Regionale 229 n. 25 Fontaneto d'Agogna (NO)

Postcode

28010

Country

Italy

Phone

+39 0322 8491

General Email

gary.perry@caleffi.com

View All Listings by this Company

Manufacturer:

Caleffi S.p.A

Company Name

Caleffi S.p.A

Address

Strada Regionale 229 n. 25 Fontaneto d'Agogna (NO)

Postcode

28010

Country

Italy

Phone

+39 0322 8491

General Email

gary.perry@caleffi.com

View All Listings by this Company

Range of wall mounted, thermostatic blending valves, (brass bodies various finishes), incorporating a quarter turn ceramic disc headwork controlling the flow. Temperature is controlled independently via a thermostatic cartridge with a manual override button incorporating dome or lever type operating members, each inlet incorporates a stainless-steel strainer and an approved check valve cartridge; however, the complete product has not been fully tested to demonstrate it provides backflow protection. The product is supplied with shower handset, hose and riser rail. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:

2010 Shower Valves

Section Subtitle:

Shower valve(s) with thermostatic temperature control

WRAS Approval Number:

240788005

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

3/4" BSP (M) x 1/2" BSP (M) offset unions

Marking:

Blending valve - Hansgrohe on body. Shower hose - Hansgrohe on captive nut. Shower handset - Hansgrohe on faceplate. Riser rail - Hansgrohe on handset holder.

Installation Requirements:

R001 R010 R040

Expiry date:

31/07/2029

Model:

24 261 xx0 - hansgrohe | Pulsify Select S - Shower system105 3jet Relaxation EcoSmart with Ecostat Fine and shower bar 90 cm, 24 262 xx0 - hansgrohe | Pulsify Select S - Shower system 105 3jet Relaxation EcoSmart with Ecostat Fine and shower bar 65 cm, 24 271 xx0 - hansgrohe | Pulsify Select S - Shower system 105 3jet Relaxation EcoSmart with Ecostat Element and shower bar 90 cm, 24 272 xx0 - hansgrohe | Pulsify Select S - Shower system 105 3jet Relaxation EcoSmart with Ecostat Element and shower bar 65 cm. Model added July 2024: 24 243 xx0 - hansgrohe | Pulsify Select S - Shower system 105 3jet Relaxation EcoSmart with Ecostat Life and shower bar 65 cm.

Approval Holder:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, Schiltach

Postcode

77761

Country

Germany

Phone

+49 170 4471 718

General Email

Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Manufacturer:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, Schiltach

Postcode

77761

Country

Germany

Phone

+49 170 4471 718

General Email

Ludovic.hauer@hansgrohe.com

View All Listings by this Company