Directory Search Results

Print List

#241002038

Range of single hole, single outlet (fixed) electronically controlled tap assemblies. Incorporating a solenoid valve activated via an infra-red sensor. The inlets to the control box incorporate stainless steel strainers and the outlet incorporates a plastic aerator. Maximum working pressure: 8 Bar Maximum operating temperature: 65°C

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Tap(s) with a non-touch methods of flow control and a single inlet.
WRAS Approval Number:
241002038
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
10mm Spigot x 1/2" BSP (F) adaptor connected to a ½” BSP (M) x ½” BSP (M) solenoid connected to stainless steel braided, PEX lined flexible hose assembly with a ½” BSP (F) captive nut
Marking:
Stern Logo on tap cover
Installation Requirements:
R001 R006 R009 R010
Expiry date:
31/10/2029
Model:
225610: Touch free B AB1953 & 225710: Touch free E AB1953
Product Images

Approval Holder:
Y. Stern Engineering (1989) Ltd
Company Name
Y. Stern Engineering (1989) Ltd
Address
15 Gan Rave Blvd. Yavne
Postcode
8122217
Country
Israel
Phone
+972 8 9326007
General Email
leah@sternfaucets.com

View All Listings by this Company

Print This Approval


#2303396

WC flushing cistern incorporating a side entry BS 1212-4 compact type float operated inlet valve providing a Type AG air gap with a dual flush drop valve for full flush volumes of up to 6 litres and a reduced flush of up to 4 litres. The cistern is operated by a manual push button and incorporates a servicing valve on the inlet supply. Maximum working pressure 10.0 bar. Cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2303396
Size:
½” BSP (M)
Marking:
Crosswater logo inside cistern. 6L waterline on adhesive label within cistern
Installation Requirements:
R001 R556 R581
Expiry date:
31/03/2028
Model:
WCF80X45R WCC46X39R WCF98X45R

Approval Holder:
Crosswater Ltd.
Company Name
Crosswater Ltd.
Address
Lake View House, Rennie Drive, Dartford.
Postcode
DA1 5FU
Country
United Kingdom
Phone
01322 475 739
General Email
david.cheshire@bathroombrands.com

View All Listings by this Company

Print This Approval


#2112372

Range of concealed WC flushing cisterns incorporating a side entry compact type float operated inlet valve providing a Type AG air gap with a dual flush drop valve for full flush volumes of up to 6 litres and a reduced flush of up to 4 litres. The cistern is operated by a manual push button and incorporates a servicing valve and flexible hose on the inlet supply. Maximum working pressure 10.0 bar. Cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2112372
Size:
½” BSP (M)
Marking:
Duravit on adhesive label bon body Duravit on flush plate Duravit, date of manufacture YYYY & Model on adhesive label inside cistern 6L waterline on casing within cistern
Installation Requirements:
R001 R556 R571
Expiry date:
31/12/2026
Model:
Durasystem range WD1034000080 WD1029000080

Approval Holder:
Duravit UK Ltd.
Company Name
Duravit UK Ltd.
Address
Unit 7 Stratus Park Brudenell Drive Brinklow Milton Keynes
Postcode
MK10 0DE

View All Listings by this Company

Print This Approval


#240602717

Range of wall hung concealed WC flushing cisterns with a BS 1212-4 float operated inlet valve providing a Type AG air gap arrangement and a dual flush outlet valve. The flush volume is operated by a push button assembly. Maximum working pressure - 10 Bar. Cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
240602717
Size:
½” BSP (M)
Marking:
Bagnodesign, WRAS and model name on cover, 6 litre line inside cistern
Installation Requirements:
R001 R280 R556 R581
Expiry date:
30/06/2029
Model:
BAGNODESIGN AQE-B695-D13-ESG1

Approval Holder:
BAGNODESIGN (SANIPEXGROUP)
Company Name
BAGNODESIGN (SANIPEXGROUP)
Address
Unit 1 Oakwell Park Trading Estate Birstall Leeds
Postcode
WF17 9LU
Country
United Kingdom
General Email
dan@sanipexgroup.com

View All Listings by this Company

Print This Approval


#241004044

Range of single hole, single outlet (fixed) over the rim (swivel nozzle) bidet combination tap assemblies (brass bodies - various finishes), incorporating a ceramic cartridge headworks with a lever type operating member. The spout outlet incorporates a metal aerator. The product is supplied with a lever type pop up waste. Maximum working pressure 3.5 bar. Maximum operating temperature 60°C.

Section:
0400 Combination Tap Assemblies - Bidet
Section Subtitle:
Single hole bidet tap(s) with a single outlet fixed spout with swivel nozzle.
WRAS Approval Number:
241004044
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
Stainless steel braided EPDM lined flexible hose assemblies incorporating 3/8” captive nut end connections.
Marking:
THG on body
Installation Requirements:
R001 R006 R010
Expiry date:
31/10/2029
Model:
6504/W - Single lever bidet mixer with waste. Series: G2H-Le 9 Howlite ; G2I-Le 9 Nero Marquina ; G2J-Faubourg Porcelaine blanche à manettes ; G2K-Faubourg Porcelaine blanche ; G2L-Faubourg Porcelaine noire ; G2M-Faubourg Porcelaine noire à manettes ; G2N-Froufrou ; G2P-Froufrou à manettes ; G2R-Frivole ; G2S-Frivole à manettes ; G2T-Faubourg Métal ; G2U-Faubourg Métal à manettes ; G58-Spirit à manettes ; G69-Spirit Finishes: A02 Polished Chrome - C47 Smoked Nickel - D16 White Lacquered - F31 Matte Soft Gold - H28 Antique Nickel - H56 Matte Nickel PVD - H67 Matte Umber PVD - A13 Smoked Brass - D01 Light Bronze Lacquered - D18 Matte Black lacquered - F33 Brown Bronze PVD - H49 Brass PVD -H60 Matte Blush PVD - B01 Polished Nickel - D05 Lacquered Matte Bronze - D21 Old Oil-Rubbed Bronze - F34 Matte Brown Bronze PVD - H52 Gold PVD - H62 Blush PVD - C01 Matte Nickel - D10 USA Oil-Rubbed Bronze - F01 Polished Gold - G01 Polished Nickel/Polished Gold - H53 Matte Gold PVD - H64 Graphite PVD - C02 Matte Chrome - D12 Polished Brass Lacquered - F07 Matte Gold - G02 Polished Chrome/Polished Gold - H55 Nickel PVD - H65 Matte Graphite PVD - C27 Unlacquered Brass - D15 Polished Black Lacquered - F30 Soft Gold - H03 Lacquered Antique Silver - H50 Matte Brass PVD - H66 Umber PVD
Product Images

Approval Holder:
THG Paris
Company Name
THG Paris
Address
35 rue Tournière Béthencourt sur Mer
Postcode
80130
Country
France
Phone
+33 3.22.60.20.80
General Email
cvallee@thg.fr

View All Listings by this Company

Print This Approval


#241004029

Ceramic cartridge headworks with a plastic body, incorporating silicone seals and NBR O-rings. The product is intended for insertion into specifically dimensioned tap assemblies. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:
0440 Headworks
Section Subtitle:
Headwork(s) for installation into specifically dimensioned taps or shower valve bodies.
WRAS Approval Number:
241004029
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
see model
Marking:
WRAS, MANDUN, date of manufacture: YYYY/MM/DD on body.
Installation Requirements:
R001
Expiry date:
31/10/2029
Model:
B35D: 35mm ceramic cartridge without distributor – 34.81mmOD. B35H: 35mm ceramic cartridge with distributor - 34.75mmOD. M35SFS: 35mm side-outlet ceramic cartridge with distributor - 34.90mmOD. M35LT-1: 35mm combined ceramic cartridge with distributor - 34.93mmOD. M35DS-3: 35mm side-outlet ceramic cartridge without distributor – 35.02mmOD. B40D: 40mm ceramic cartridge without distributor – 39.68mmOD. B40H: 40 mm ceramic cartridge with distributor – 39.76mmOD. M40SFS: 40mm side-outlet ceramic cartridge with distributor – 39.88mmOD. M40LT-1: 40mm combined ceramic cartridge with distributor – 39.88mmOD. B25D: 25mm ceramic cartridge without distributor – 24.86mmOD.
Product Images

Manufacturer:
Ningbo Fenghua Mandun Ceramic Cartridge Technology Co. Ltd.
Company Name
Ningbo Fenghua Mandun Ceramic Cartridge Technology Co. Ltd.
Address
Xiachen Economic Development Zone, Chunhu Town, Fenghua District, Ningbo, Zhejiang, China

View All Listings by this Company

Print This Approval


#250103001

Range of quarter turn Ceramic disc headworks with brass bodies incorporating NBR rubber seals. For insertion into specifically dimensioned bores Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:
0440 Headworks
Section Subtitle:
Headwork(s) for installation into specifically dimensioned taps or shower valve bodies.
WRAS Approval Number:
250103001
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
¾ “ BSP (M)
Marking:
Bristan on valve.
Installation Requirements:
R001
Expiry date:
31/01/2030
Model:
Short stem – Chrome: 19MC090R58.04 19MC090L33.04 Long stem – Chrome: 19MC090L32.04 19MC090R57.04 Long stem – Brushed Nickel: 19MC090L43.04 19MC090R66.04 Long stem – Vintage Gold: 19MC090L44.04 19MC090R67.04

Approval Holder:
Bristan Group Ltd.
Company Name
Bristan Group Ltd.
Address
Birch Coppice Business Park Dorden Tamworth
Postcode
B78 1SG
Country
Staffs
Phone
01827 254144
General Email
hmistry@bristan.com

View All Listings by this Company

Print This Approval


#241015001

Range of ceramic cartridge headworks with plastic bodies for insertion into specifically dimensioned tap assemblies. Some models incorporate a stainless-steel strainer. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:
0440 Headworks
Section Subtitle:
Headwork(s) for installation into specifically dimensioned taps or shower valve bodies.
WRAS Approval Number:
241015001
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
25G1: Ø 24.9mm, 35G1: Ø 34.7mm, 35S1: Ø 34.7mm, 40G1: Ø 39.8mm & 40S1: Ø 39.8mm.
Marking:
Chaoling and WRAS on body.
Installation Requirements:
R001
Expiry date:
31/10/2029
Model:
25G1, 35G1, 35S1, 40G1 & 40S1.

Approval Holder:
Zhejiang Chaoling Chinaware Valve Co. Ltd
Company Name
Zhejiang Chaoling Chinaware Valve Co. Ltd
Address
Dayangcheng Industry Park Daxi Town Wenling
Country
Zhejiang

View All Listings by this Company
Manufacturer:
Zhejiang Chaoling Chinaware Valve Co. Ltd
Company Name
Zhejiang Chaoling Chinaware Valve Co. Ltd
Address
Dayangcheng Industry Park Daxi Town Wenling
Country
Zhejiang

View All Listings by this Company

Print This Approval


#241004031

Single hole, single outlet (fixed) combination tap assembly (chromium plated brass), incorporating a single sequential cartridge headwork and single lever operating member. The spout outlet incorporates a plastic aerator. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole tap(s) with a single outlet and a fixed spout.
WRAS Approval Number:
241004031
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
Stainless steel braided PEX lined hose assembly incorporating ½” captive nut end connections
Marking:
I.Care on operating member.
Installation Requirements:
R001 R006 R010
Expiry date:
31/10/2029
Model:
1918: i.Care Doc M Mixer
Product Images

Approval Holder:
Balmorals London Ltd.
Company Name
Balmorals London Ltd.
Address
Delphina House, 24-26 Arcadia Avenue, London
Postcode
N3 2JU

View All Listings by this Company

Print This Approval


#250204001

Range of single hole, single outlet (fixed) combination tap assemblies, (brass bodies – various finishes). Incorporating a single sequential headwork with a single lever operating member. The spout outlet incorporates a plastic aerator and the product is supplied with a pop-up waste. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole tap(s) with a single outlet and a fixed spout.
WRAS Approval Number:
250204001
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Note:
No testing performed on pop up waste.
Size:
Stainless steel braided EPDM lined flexible hose assemblies incorporating ½” BSP (F) captive nut end connections. 15mm Copper tails
Marking:
Deva (brand of Methven) on operating member. DTC32A on body
Installation Requirements:
R001 R006 R010
Expiry date:
28/02/2030
Model:
SOL004 - Sequential Mono Basin Mixer. OSL004 - Sequential Mono Basin Mixer.

Approval Holder:
Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court Yew Tree Way Golborne Warrington
Postcode
WA3 3JE
Country
United Kingdom
Phone
0800 195 1602
General Email
raluca.olariu@uk.methven.com

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 646 of 854

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.