Water Regulations Approval Scheme Ltd

Directory Search Results

WRAS Approval Number: #2310384

FloPlast "Supreme" range of fittings for use with PE pipes (manufactured to EN12201-2). Supplied with a plastic pipe support liner For above and below ground use. Maximum working pressure 16.0 bar. Cold water use only.

Section:: 1160 Fittings for use with Tube and Pipe
Section Subtitle:: Compression, plastic, for use with plastic tube. Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:: 2310384
Size:: see model
Marking:: Supreme, made in Italy, size and PN on fitting nut.
Installation Requirements:: R001
Expiry date:: 31/10/2028
Model:: 90° Increasing Tee S070020025 20x25x20 S070025032 25x32x25 90° Reducing Tee S075025020 25x25x20 S075032025 32x32x25 S075040032 40x40x32 S075050032 50x50x32 S075050040 50x50x40 S075063050 63x63x50 S075075063 75x75x63 S075090075 90x90x75 S075110090 110x110x90 S075110063 110x63x110 90° Tee S080020020 20x20x20 S080025025 25x25x25 S080032032 32x32x32 S080040040 40x40x40 S080050050 50x50x50 S080063063 63x63x63 S080075075 75x75x75 S080090090 90x90x90 S080110110 110x110x110 90° Tee with Female Thread S085020012 20X20X1/2" S085020034 20X20X3/4" S085025012 25X25X1/2" S085025034 25X25X3/4" S085025100 25X25X1" S085032012 32X32X1/2" S085032034 32X32X3/4" S085032100 32X32X1" S085032114 32X32X1"1/4 S085040100 40X40X1" S085040114 40X40X1"1/4 S085040112 40X40X1"1/2 S085050114 50X50X1"1/4 S085050112 50x50x1"1/2 S085050200 50x50x2" S085063112 63x63x1"1/2 S085063200 63x63x2" S085063212 63x63x2"1/2 S085075200 75x75x2" S085075212 75x75x2"1/2 S085075300 75x75x3" S085090212 90x90x2"1/2 S085090300 90x90x3" S085110300 110x110x3" S085110400 110x110x4" 90° Tee with Male Thread S090020012 20x20x1/2" S090020034 20x20x3/4" S090025012 25x25x1/2" S090025034 25x25x3/4" S090025100 25x25x1" S090032012 32x32x1/2" S090032034 32x32x3/4" S090032100 32x32x1" S090032114 32x32x1"1/4 S090040100 40x40x1" S090040114 40x40x1"1/4 S090040112 40x40x1"1/2 S090050114 50x50x1"1/4 S090050112 50x50x1"1/2 S090050200 50x50x2" S090063112 63x63x1"1/2 S090063200 63x63x2" S090063212 63x63x2"1/2 S090075212 75x75x2"1/2 S090075300 75x75x3" S090090300 90x90x3" S090110401 110x110x4" Male Adaptor S095020012 20x1/2" S095020034 20x3/4" S095020100 20x1" S095025012 25x1/2" S095025034 25x3/4" S095025100 25x1" S095032012 32x1/2" S095032034 32x3/4" S095032100 32x1" S095032114 32x1"1/4 S095032112 32x1"1/2 S095040100 40x1" S095040114 40x1"1/4 S095040112 40x1"1/2 S095040200 m40x2" S095050114 50x1"1/4 S095050112 50x1"1/2 S095050200 50x2" S095063114 63x1"1/4 S095063112 m63x1"1/2 S095063200 63x2" S095063212 63x2"1/2 S095075200 75x2" S095075212 75x2"1/2 S095075300 75x3" S095090200 90x2" S095090212 90x2"1/2 S095090300 90x3" S095090400 90x4" S095110200 110x2" S095110300 110x3" S095110400 110x4" Female Adaptor S100020012 20x1/2" S100020034 20x3/4" S100025012 25x1/2" S100025034 25x3/4" S100025100 25x1" S100032012 32x1/2" S100032034 32x3/4" S100032100 32x1" S100032114 32x1"1/4 S100040100 40x1" S100040114 40x1"1/4 S100040112 40x1"1/2 S100050114 50x1"1/4 S100050112 50x1"1/2 S100050200 50x2" S100063112 63x1"1/2 S100063200 63x2" S100063212 63x2"1/2 S100075200 75x2" S100075212 75x2"1/2 S100075300 75x3" S100090200 90x2" S100090212 90x2"1/2 S100090300 90x3" S100090400 90x4" S100110200 110x2" S100110300 110x3" S100110400 110x4" Coupling S105020000 20 S105025000 25 S105032000 32 S105040000 40 S105050000 50 S105063000 63 S105075000 75 S105090000 90 S105110000 110
Repair Coupling S106020000 20 S106025000 25 S106032000 32 S106040000 40 S106050000 50 S106063000 63 S106075000 75 S106090000 90 S106110000 110 Reducing Coupling S110025020 25x20 S110032020 32x20 S110032025 32x25 S110040025 40x25 S110040032 40x32 S110050032 50x32 S110050040 50x40 S110063032 63x32 S110063040 63x40 S110063050 63x50 S110075050 75x50 S110075063 75x63 S110090063 90x63 S110090075 90x75 S110110063 110x63 S110110075 110x75 S110110090 110x90 Plug S115020000 20 S115025000 25 S115032000 32 S115040000 40 S115050000 50 S115063000 63 S115075000 75 S115090000 90 S115110000 110 90° Elbow S120020000 20 S120025000 25 S120032000 32 S120040000 40 S120050000 50 S120063000 63 S120075000 75 S120090000 90 S120110000 110 90° Elbow with Female Thread S125020012 20x1/2" S125020034 20x3/4" S125025012 25x1/2" S125025034 25x3/4" S125025100 25x1" S125032012 32x1/2" S125032034 32x3/4" S125032100 32x1" S125032114 32x1"1/4 S125040100 40x1" S125040114 40x1"1/4 S125040112 40x1"1/2 S125050114 50x1"1/4 S125050112 50x1"1/2 S125050200 50x2" S125063112 63x1"1/2 S125063200 63x2" S125063212 63x2"1/2 S125075212 75x2"1/2 S125075300 75x3" S125090300 90x3" S125090400 90x4" S125110400 110x4" 90° Elbow with Male Thread S130020012 20x1/2" S130020034 20x3/4" S130025012 25x1/2" S130025034 25x3/4" S130025100 25x1" S130032012 32x1/2" S130032034 32x3/4" S130032100 32x1" S130032114 32x1"1/4 S130040100 40x1" S130040114 40x1"1/4 S130040112 40x1"1/2 S130050114 50x1"1/4 S130050112 50x1"1/2 S130050200 50x2" S130063112 63x1"1/2 S130063200 63x2" S130063212 63x2"1/2 S130075212 75x2"1/2 S130075300 75x3" S130090300 90x3" S130090400 90x4" S130110400 110x4" Victaulic S134063200 63x2" S134110400 110x4" Flange Adaptor S135040112 40x1"1/2 S135050112 50x1"1/2 S135050200 50x2" S135063200 63x2" S135075212 75x2"1/2 S135075300 75x3" S135090300 90x3" S135090400 90x4" S135110400 110x4" Wall Plate Elbow S127020012 20x1/2" S127025034 25x3/4" 90° Elbow - Female Outlet 90° S128025012 25X25X1/2" S128032012 32X32X1/2" S128032034 32X32X3/4" Pipe Liner 772900020 20 772900025 25 772900032 32 772900040 40 772900050 50 772900063 63

Approval Holder:: FloPlast Ltd

Company Name
FloPlast Ltd
Address
Eurolink Business Park Castle road Sittingbourne
Postcode
ME20 3FP
Country
United Kingdom
Phone
01795431731
General Email
henyb@floplast.co.uk

View All Listings by this Company
Manufacturer:: Sab SpA

Company Name
Sab SpA
Address
Via Salvo D'acquiso, 61048 Sant'Angelo In Vado (PU)
Country
Italy
General Email

View All Listings by this Company

WRAS Approval Number: #2310389

Range of Talbot pushfit fittings with polyprolylene or acetal bodies and EPDM o-rings for use with MDPE PE80 pipe (BS EN 12201). For use above and below ground use. Maximum working pressure 16 bar. Cold water use only.

Section:: 1180 Fittings for use with Tube and Pipe
Section Subtitle:: Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:: 2310389
Size:: See models for pushfit fittings. Copper compression fittings – 15mm & 22mm for use with copper (EN1057).
Marking:: Talbot, size and pressure rating moulded on body.
Installation Requirements:: R001
Expiry date:: 31/10/2028
Model:: Adaptor Male Thread - Type 1 Solid Body 20mm – 63mm: E6581; E6580; E6579; E6582; E9128; E3515; E3516; E10423. Adaptor Male Thread - Type 2 Cone and body 20mm – 32mm: E2729; E2371; E2732. Adaptor Female Thread - Type 1 Solid Body 20mm – 63mm: E11082; E5095; E3578; E5092; E5096; E3517; E8532; E6588; E8534; E8535; E8536. Adaptor Female Thread - Type 2 Cone and body 20mm – 32mm: E2730; E2735; E5094: E5098; E2736; E8625. Adaptor Female – Copper - Type 1 Solid Body 20mm for Above ground use ONLY: E4145. Adaptor Female – Copper - Type 2 Cone and Body 20mm - 25mm for Above ground use ONLY: E4147; E5182. Tank Connector - Type 1 Solid Body 25mm: E7248. Connector Body - Type 1 Solid Body 20mm – 63mm: E3520; E3521; E2831; E3522; E3523; E3995; E3524; E3525; E7283; E3996. Connector – Body Type 2 Cone and Body 20mm – 32mm: E2822; E2825; E2826; E2829; E2833. Equal Tee Connector - Type 1 Solid Body 20mm – 63mm: E3537; E3538; E3033; E3363; E3038; E3039; E3998; E3997. Equal Tee Connector - Type 2 Cone and Body 20mm – 32mm: E3032; E3037; E3042; E3036; E3040; E3041. Tee Connector P/f x F/Thread - Type 1 Solid Body 20mm – 63mm: E3035; E3043; E3044; E3045; E4355; E4356. Bend / Elbow Connector Body - Type 1 Solid Body 20mm – 63mm: E7734; E9010; E3518; E3519. Bend / Elbow Connector Body - Type 2 Cone and Body 20mm – 32mm: E2781; E2783; E2784. Elbow Connector Body P/F x F/Thread - Type 1 Solid Body 20mm – 63mm: E6151; E6152; E6153; E6154; E4353; E4354; E2787. Elbow Connector Body P/F x F/Thread - Type 2 Cone and Body 20mm – 32mm: E2782; E2789; 2788. Elbow Connector Body P/F x M/Thread - Type 1 Solid Body 25mm – 32mm: E4670; E4671. Stop End - Type 1 Solid Body 20mm – 63mm: E3364; E3365; E3366; E5097; E4375. Wall Plate Elbow - Type 1 Solid Body 20mm – 32mm: E2798; E2799; E2800. Repair Connector Straight - Type 1 Solid Body 20mm – 32mm: E7782; E7777; E7778.

Approval Holder:: Atlantic Plastics Ltd.

Company Name
Atlantic Plastics Ltd.
Address
Coytraherne Close, Brackla, Bridgend
Postcode
CF31 2AX
Country
United Kingdom
Phone
01656672628
General Email
rhodgkiss@atplas.co.uk

View All Listings by this Company
Manufacturer:: Atlantic Plastics Ltd.

Company Name
Atlantic Plastics Ltd.
Address
Coytraherne Close, Brackla, Bridgend
Postcode
CF31 2AX
Country
United Kingdom
Phone
01656672628
General Email
rhodgkiss@atplas.co.uk

View All Listings by this Company

WRAS Approval Number: #2311028

Range of WC dual flush drop valves with ABS bodies and silicone seals. The valves are operated via a two push button assembly for either full or reduced flush and incorporate an internal overflow. Cold water use only.

Section:: 1305 Flushing Mechanisms
Section Subtitle:: WC. Except where specified, flushing valves within this section have only completed a limited number of the performance and endurance tests as stated in the "Regulators Specification for WC suites installed after 1st January 2001". The flush volume of valves within this section have not been verified by test. When installed in combination with a WC cistern and pan, further performance tests will be required.
WRAS Approval Number:: 2311028
Size:: 2” BSP (M)
Marking:: LAB logo and model on body
Installation Requirements:: R001 R571 R580 R581
Expiry date:: 30/11/2028
Model:: B218M B228 B2650

Product Images

Approval Holder:: Lab (Xiamen) Sanitary Fittings Inc

Company Name
Lab (Xiamen) Sanitary Fittings Inc
Address
No. 41 Siming Industrial Park Tong An Industrial Center Xiamen, Fujian
Country
361100 China
Phone
0086 592 6501561

View All Listings by this Company
Manufacturer:: Lab (Xiamen) Sanitary Fittings Inc

Company Name
Lab (Xiamen) Sanitary Fittings Inc
Address
No. 41 Siming Industrial Park Tong An Industrial Center Xiamen, Fujian
Country
361100 China
Phone
0086 592 6501561

View All Listings by this Company

WRAS Approval Number: #2311323

Single flush WC outlet valves with an ABS plastic body (WC01), operated via a mains powered infra red sensor assembly (WC03). Cold water use only.

Section:: 1305 Flushing Mechanisms
Section Subtitle:: WC. Except where specified, flushing valves within this section have only completed a limited number of the performance and endurance tests as stated in the "Regulators Specification for WC suites installed after 1st January 2001". The flush volume of valves within this section have not been verified by test. When installed in combination with a WC cistern and pan, further performance tests will be required.
WRAS Approval Number:: 2311323
Size:: 1 ½” BSP(M) SIZE ADDED OCTOBER 2024 2” BSP
Marking:: DVS, website, telephone no on sensor rosette.
Installation Requirements:: R001 R571 R572
Expiry date:: 30/11/2028
Model:: WCO1 (flush valve) To be installed using the following kit: WCO3 (flush valve kit)

Product Images

Approval Holder:: KWC DVS Ltd.

Company Name
KWC DVS Ltd.
Address
Kemmings Close, Long Road, Paignton, Devon
Postcode
TQ4 7TW
Country
United Kingdom
Phone
01246 458 900
General Email
richard.lamb@kwc.com

View All Listings by this Company

WRAS Approval Number: #2311324

Range of syphonic flush valves with plastic bodies. Cold water only

Section:: 1305 Flushing Mechanisms
Section Subtitle:: WC. Except where specified, flushing valves within this section have only completed a limited number of the performance and endurance tests as stated in the "Regulators Specification for WC suites installed after 1st January 2001". The flush volume of valves within this section have not been verified by test. When installed in combination with a WC cistern and pan, further performance tests will be required.
WRAS Approval Number:: 2311324
Size:: ½” BSP
Marking:: Derwent Macdee
Installation Requirements:: R001 R571 R572
Expiry date:: 30/11/2028
Model:: DSD1538 DSD1683 DSD7125 DSD8225 DSD9225 140108 140037

Product Images

Approval Holder:: Wirquin Ltd

Company Name
Wirquin Ltd
Address
Unit 3 Alpha Court Thorne Doncaster
Postcode
DN8 5TZ
Country
United Kingdom
Phone
01302 312252
General Email
mick.kirby@wirquin.co.uk

View All Listings by this Company
Manufacturer:: Wirquin Ltd

Company Name
Wirquin Ltd
Address
Unit 3 Alpha Court Thorne Doncaster
Postcode
DN8 5TZ
Country
United Kingdom
Phone
01302 312252
General Email
mick.kirby@wirquin.co.uk

View All Listings by this Company

WRAS Approval Number: #2310061

WC. Except where specified, flushing valves within this section have only completed a limited number of the performance and endurance tests as stated in the "Regulators Specification for WC suites installed after 1st January 2001". The flush volume of valves within this section have not be verified by test. When installed in combination with a WC cistern and pan, further performance tests will be required.

Section:: 1305 Flushing Mechanisms
Section Subtitle:: WC. Except where specified, flushing valves within this section have only completed a limited number of the performance and endurance tests as stated in the "Regulators Specification for WC suites installed after 1st January 2001". The flush volume of valves within this section have not been verified by test. When installed in combination with a WC cistern and pan, further performance tests will be required.
WRAS Approval Number:: 2310061
Note:: Direct connection to inlet valve not permitted.
Size:: 2” BSP (M)
Marking:: Rongji. Date of manufacture (YYYY/MM/DD) on body
Installation Requirements:: R001 R571 R580 R581
Expiry date:: 31/10/2028
Model:: A2120

Approval Holder:: Xiamen R&J Precision Technology Co., Ltd.

Company Name
Xiamen R&J Precision Technology Co., Ltd.
Address

View All Listings by this Company
Manufacturer:: Xiamen R&J Precision Technology Co., Ltd.

Company Name
Xiamen R&J Precision Technology Co., Ltd.
Address

View All Listings by this Company

WRAS Approval Number: #2310323

Range of manually operated and sensor operated dual flush WC outlet valves. Cold water use only.

Section:: 1305 Flushing Mechanisms
Section Subtitle:: WC. Except where specified, flushing valves within this section have only completed a limited number of the performance and endurance tests as stated in the "Regulators Specification for WC suites installed after 1st January 2001". The flush volume of valves within this section have not been verified by test. When installed in combination with a WC cistern and pan, further performance tests will be required.
WRAS Approval Number:: 2310323
Size:: 1 ½” BSP (M), 2” BSP (M).
Marking:: Wirquin moulded on body.
Installation Requirements:: R001 R571 R580 R581
Expiry date:: 31/10/2028
Model:: JOLLYFLUSH – 81811129, JOLLYFLUSH – 10120446, JOLLYTRONIC – 10120021.

Product Images

Approval Holder:: Wirquin Ltd

Company Name
Wirquin Ltd
Address
Unit 3 Alpha Court Thorne Doncaster
Postcode
DN8 5TZ
Country
United Kingdom
Phone
01302 312252
General Email
mick.kirby@wirquin.co.uk

View All Listings by this Company

WRAS Approval Number: #2311062

Range of plate heat exchangers with stainless steel plate bodies and copper brazing. Maximum working pressure: 45 Bar. Maximum operating temperature: 99 °C.

Section:: 1350 Heat Exchangers
Size:: See models.
Marking:: Hrale logo, Model, pressure and product info on adhesive label.
Installation Requirements:: R001
Expiry date:: 30/11/2028
Model:: B3-5, B3-6, B3-9 - ¼” BSP (F) or ⅜” welded pipe connections. B3-12, B3-13, B3-14, B3-15, B3-23, B3-36 & B3-42 - ¾” BSP (M) or 7/8” welded pipe connections. B3-14 DW, B3-16, B3-18 & B3-20 - 1” BSP (M) or 7/8” welded pipe connection. B3-26, B3-27, B3-52, B3-52 DW, B3-60, B3-40, B3-68 & B3-80 - 1 ¼” BSP (M) or 1 ⅜” welded pipe connections. B3-32, B3-32 DW & B3-35 - 1” BSP (M) or 1 1/8” welded pipe connections. B3-63, B3-95, B3-95 DW, B3-115 – 2 ½” BSP (M) or 2 ⅜” welded pipe connections. B3-105 – 3” BSP (M) or 3” welded pipe connections. B3-30 – 1” BSP (M) or 1” welded pipe connections.

Product Images

Approval Holder:: Ningbo Hrale Plate Heat Exchanger Co., Ltd.

Company Name
Ningbo Hrale Plate Heat Exchanger Co., Ltd.
Address
No. 98, Binwan Road, Binhai New Area, Fenghua, Ningbo, China

View All Listings by this Company

WRAS Approval Number: #2311004

Range of water meters with brass bodies and plastic turbines. The inlet incorporates a plastic filter. Maximum working pressure 16.0 bar. Maximum operating temperatures - SJ-SDC plus DN15-25 models: 50°C, SJ-SDC plus DN32-40 models: 85°C.

Section:: 1505 Water Meters
Size:: See model.
Marking:: SJ-SDC plus DN15-25 models: NWM, MWM logo and product info on dial. Flow arrow on body. SJ-SDC plus DN32-40 models added February 2024: NWM, NWM logo, max pressure, max temperature, and product info on dial. Flow arrow on body.
Installation Requirements:: R001
Expiry date:: 30/11/2028
Model:: SJ-SDC plus DN15: ¾” BSP (M), SJ-SDC plus DN 20: 1” BSP (M), SJ-SDC plus DN 25: 1¼” BSP (M). Models added February 2024: SJ-SDC plus DN 32: 1½” BSP (M), SJ-SDC plus DN 40: 2” BSP (M).

Product Images

Approval Holder:: Ningbo Water Meter (Group) Co., Ltd

Company Name
Ningbo Water Meter (Group) Co., Ltd
Address
No 355 Hongxing Road Jiangbei District Ningbo
Country
China

View All Listings by this Company

WRAS Approval Number: #2401709

Range of water meters with plastic bodies and plastic or brass threads (see models). Maximum working pressure 16.0 Bar Cold water use only.

Section:: 1505 Water Meters
WRAS Approval Number:: 2401709
Note:: The product can be marked with either Honeywell or Elster on the cap.
Size:: ¾” BSP (M) (DN15 models) 1” BSP (M) (DN20 models)
Marking:: Honeywell or Elster on cover. Honeywell and product info of meter face. Flow arrow on body.
Installation Requirements:: R001
Expiry date:: 31/01/2029
Model:: V200P (DN15, Polymer Threads) V200P (DN15, Brass Threads) V200P (DN20, Polymer Threads) V200P (DN20, Brass Threads)

Approval Holder:: Elster Water Metering Limited

Company Name
Elster Water Metering Limited
Address
130 Camford Way Sundon Park Luton
Postcode
LU3 3AN
Country
United Kingdom
Phone
01582 846 400
General Email
matthew.ward@honeywell.com

View All Listings by this Company