Fixed filling loop assembly comprising of a lever operated brass spherical valve, an angled non-verifiable double check valve/spherical valve assembly (suitable for backflow protection against fluid category 3), brass adaptors and a copper connecting elbow fitting. Maximum working pressure 10.0 bar. Cold water use only.

Section:

1015 Filling Loop

Size:

½” BSP captive nut (F)

Marking:

IDC, PN, date of manufacture (MM-YY), flow arrow & CR on body of double check valve/spherical valve.

Installation Requirements:

R001

Expiry date:

30/04/2029

Model:

1BTA001

Product Images

Approval Holder:

Ningbo IDC International Trading Co. Ltd.

Company Name

Ningbo IDC International Trading Co. Ltd.

Address

Floor 43, Building A, International Trade Center, Ningbo Chamber of Commerce, No. 558 of Taikangzhong Road, Yinzhou District, Ningbo

Country

China

View All Listings by this Company

Range of in-line carbon block water filters and housings with polypropylene bodies. Maximum working pressure 8.0 bar. Cold water use only.

Section:

1050 Filters and Housings

Size:

¼” pushfit or 3/8” pushfit inlet connection.

Marking:

Model & technical info on adhesive label on body

Installation Requirements:

R001 R008 R120 R150 R170

Expiry date:

28/02/2029

Model:

¼” pushfit inlet connection: AQF-FF11B MB-F11B AQF-FF11F AQF-FF13 AQF-FF27 MB-F27 AQU-WF02 3/8” pushfit inlet connection: MB-W01

Approval Holder:

Qingdao Ecopure filter Co., Ltd

Company Name

Qingdao Ecopure filter Co., Ltd

Address

No. 13, Yishengbai Rd. Environmental Protection Industry Zone, Jimo

Country

Qingdao,

View All Listings by this Company

Range of inline filter cartridges with plastic or chromium plated brass bodies. Models 02-803231, 02-803235 & 02-803236 incorporate a plastic flow regulator, stainless steel filter and and an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides adequate backflow protection. Model 02-000242 is a replacement filter for 02-803236 Chrome In-line filter. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:

1055 Filter Cartridges

WRAS Approval Number:

2312330

Note:

These products have not been tested or approved for claims of antimicrobial properties made by the approval holder. IRN R008 applies to model 02-000242 only.

Size:

½” BSP (M)

Marking:

T-Safe. Flow arrow and PN on body of plastic units.

Installation Requirements:

R001 R008 R120 R150 R170 R290

Expiry date:

31/12/2028

Proviso:

The models listed on this approval fall under the scope of the GB Biocidal Products Regulations (GB BPR) by either incorporating or producing an active substance and/or incorporating a treated article. The products have been judged only against the requirements of The Water Supply (Water Fittings) Regulations 1999 (England and Wales), The Water Supply (Water Fittings) (Scotland) Byelaws 2014 or The Water Supply (Water Fittings) Regulations (Northern Ireland) 2009. The decision of the Scheme to list them is not to be taken as any guide as to their effectiveness to do the job for which the active substance and/or treated article is present. WRAS accepts no liability for the material meeting the requirements of the GB Biocidal Products Regulations.

Model:

02-803231 Medical In-Line filter. 02-803235 Sterile Medical In-Line filter. 02-803236 Chrome In-line filter. 02-000242 Replacement filter for 02-803236 Chrome In-line filter.

Approval Holder:

T-safe A/S

Company Name

T-safe A/S

Address

Gydevang 1, Alleroed

Postcode

3450

Country

Denmark

Phone

+45 61610518

General Email

moj@t-safe.com

View All Listings by this Company

Range of M type press copper crimp fittings with EPDM ‘O’-rings for use with copper tube manufactured to EN 1057. The joints are achieved by means of a crimping tool. For above ground use. Maximum working pressure: 16.0 bar. Maximum operating temperature: 85°C

Section:

1100 Fittings and Pipe - Compatible Systems

Section Subtitle:

Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

240404010

Size:

see models

Marking:

YS, size etched on body. (Note: For 66.7mm models it will be marked as 67mm, for 76.1mm models it will be marked as 76mm, for 88.9mm it will be marked as 89mm)

Installation Requirements:

R001

Expiry date:

30/04/2029

Model:

STRAIGHT COUPLING CxC: 6270.15 - 15mm 6270.22 - 22mm 6270.28 - 28mm 6270.35 - 35mm 6270.42 - 42mm 6270.54 - 54mm 6270.67 - 66.7mm 6270.76 - 76.1mm 6270.89 - 88.9mm 6270.108 - 108mm SLIP COUPLING C x C: 6270L.15 - 15mm 6270L.22 - 22mm 6270L.28 - 28mm 6270L.35 - 35mm 6270L.42 - 42mm 6270L.54 - 54mm 6270L.67 - 66.7mm 6270L.76 - 76.1mm 6270L.89 - 88.9mm 6270L.108 - 108mm REDUCING COUPLING C x C: 6240.2215 - 22mm x 15mm 6240.2815 - 28mm x 15mm 6240.2822 - 28mm x 22mm 6240.3515 - 35mm x 15mm 6240.3522 - 35mm x 22mm 6240.3528 - 35mm x 28mm 6240.4215 - 42mm x 15mm 6240.4222 - 42mm x 22mm 6240.4228 - 42mm x 28mm 6240.4235 - 42mm x 35mm 6240.5415 - 54mm x 15mm 6240.5422 - 54mm x 22mm 6240.5428 - 54mm x 28mm 6240.5435 - 54mm x 35mm 6240.5442 - 54mm x 42mm 6240.6728 - 66.7mm x 28mm 6240.6735 - 66.7mm x 35mm 6240.6742 - 66.7mm x 42mm 6240.6754 - 66.7mm x 54mm 6240.7635 - 76.1mm x 35mm 6240.7642 - 76.1mm x 42mm 6240.7654 - 76.1mm x 54mm 6240.7667 - 76.1mm x 66.7mm 6240.8942 - 88.9mm x 42mm 6240.8954 - 88.9mm x 54mm 6240.8967 - 88.9mm x 66.7mm 6240.8976 - 88.9mm x 76.1mm 6240.10842 - 108mm x 42mm 6240.10854 - 108mm x 54mm 6240.10867 - 108mm x 66.7mm 6240.10876 - 108mm x 76.1mm 6240.10889 - 108mm x 88.9mm FITTING REDUCER F x C: 6243.2215 - 22mm x 15mm 6243.2815 - 28mm x 15mm 6243.2822 - 28mm x 22mm 6243.3515 - 35mm x 15mm 6243.3522 - 35mm x 22mm 6243.3528 - 35mm x 28mm 6243.4215 - 42mm x 15mm 6243.4222 - 42mm x 22mm 6243.4228 - 42mm x 28mm 6243.4235 - 42mm x 35mm 6243.5415 - 54mm x 15mm 6243.5422 - 54mm x 22mm 6243.5428 - 54mm x 28mm 6243.5435 - 54mm x 35mm 6243.5442 - 54mm x 42mm 6243.6728 - 66.7mm x 28mm 6243.6735 - 66.7mm x 35mm 6243.6742 - 66.7mm x 42mm 6243.6754 - 66.7mm x 54mm 6243.7635 - 76.1mm x 35mm 6243.7642 - 76.1mm x 42mm 6243.7654 - 76.1mm x 54mm 6243.7667 - 76.1mm x 66.7mm 6243.8942 - 88.9mm x 42mm 6243.8954 - 88.9mm x 54mm 6243.8967 - 88.9mm x 66.7mm 6243.8976 - 88.9mm x 76.1mm 6243.10842 - 108mm x 42mm 6243.10854 - 108mm x 54mm 6243.10867 - 108mm x 66.7mm 6243.10876 - 108mm x 76.1mm 6243.10889 - 108mm x 88.9mm 90DEG ELBOW C x C: 6002.15 - 15mm 6002.22 - 22mm 6002.28 - 28mm 6002.35 - 35mm 6002.42 - 42mm 6002.54 - 54mm 6002.67 - 66.7mm 6002.76 - 76.1mm 6002.89 - 88.9mm 6002.108 - 108mm 90DEG STREET ELBOW F x C: 6001.15 15mm 6001.22 22mm 6001.28 28mm 6001.35 35mm 6001.42 42mm 6001.54 54mm 6001.67 66.7mm 6001.76 76.1mm 6001.89 88.9mm 6001.108 108mm 45DEG ELBOW C x C: 6041.15 - 15mm 6041.22 - 22mm 6041.28 - 28mm 6041.35 - 35mm 6041.42 - 42mm 6041.54 - 54mm 6041.67 - 66.7mm 6041.76 - 76.1mm 6041.89 - 88.9mm 6041.108 - 108mm 45DEG STREET ELBOW F x C: 6040.15 - 15mm 6040.22 - 22mm 6040.28 - 28mm 6040.35 - 35mm 6040.42 - 42mm 6040.54 - 54mm 6040.67 - 66.7mm 6040.76 - 76.1mm 6040.89 - 88.9mm 6040.108 - 108mm CAP C x C: 6301.15 - 15mm 6301.22 - 22mm 6301.28 - 28mm 6301.35 - 35mm 6301.42 - 42mm 6301.54 - 54mm 6301.67 - 66.7mm 6301.76 - 76.1mm 6301.89 - 88.9mm 6301.108 - 108mm EQUAL TEE C x C: 6130.15 - 15mm 6130.22 - 22mm 6130.28 - 28mm 6130.35 - 35mm 6130.42 - 42mm 6130.54 - 54mm 6130.67 - 66.7mm 6130.76 - 76.1mm 6130.89 - 88.9mm 6130.108 - 108mm PART CROSSOVER F x C: 6086.15 - 15mm 6086.22 - 22mm CROSSOVER C x C: 6085.15 - 15mm 6085.22 - 22mm REDUCER ELBOW 6090.2215 - 22mm x 15mm 6090.2815 - 28mm x 15mm 6090.2822 - 28mm x 22mm REDUCING TEE: 6130R.221515 - 22mm x 15mm x 15mm 6130R.222215 - 22mm x 22mm x 15mm 6130R.282222 - 28mm x 22mm x 22mm 6130R.282822 - 28mm x 28mm x 22mm 6130R.281522 - 28mm x 15mm x 22mm 6130R.282815 - 28mm x 28mm x 15mm 6130R.352222 - 35mm x 22mm x 22mm 6130R.353522 - 35mm x 35mm x 22mm 6130R.353528 - 35mm x 35mm x 28mm 6130R.423535 - 42mm x 35mm x 35mm 6130R.152215 - 15mm x 22mm x 15mm 6130R.222822 - 22mm x 28mm x 22mm 6130R.221522 - 22mm x 15mm x 22mm 6130R.281528 - 28mm x 15mm x 28mm 6130R.282228 - 28mm x 22mm x 28mm 6130R.351535 - 35mm x 15mm x 35mm 6130R.352235 - 35mm x 22mm x 35mm 6130R.352835 - 35mm x 28mm x 35mm 6130R.421542 - 42mm x 15mm x 42mm 6130R.422242 - 42mm x 22mm x 42mm 6130R.422842 - 42mm x 28mm x 42mm 6130R.423542 - 42mm x 35mm x 42mm 6130R.541554 - 54mm x 15mm x 54mm 6130R.542254 - 54mm x 22mm x 54mm 6130R.542854 - 54mm x 28mm x 54mm 6130R.543554 - 54mm x 35mm x 54mm 6130R.544254 - 54mm x 42mm x 54mm 6130R.672867 - 66.7mm x 28mm x 66.7mm 6130R.673567 - 66.7mm x 35mm x 66.7mm 6130R.674267 - 66.7mm x 42mm x 66.7mm 6130R.675467 - 66.7mm x 54mm x 66.7mm 6130R.762276 - 76.1mm x 22mm x 76.1mm 6130R.762876 - 76.1mm x 28mm x 76.1mm 6130R.763576 - 76.1mm x 35mm x 76.1mm 6130R.764276 - 76.1mm x 42mm x 76.1mm 6130R.765476 - 76.1mm x 54mm x 76.1mm 6130R.766776 - 76.1mm x 66.7mm x 76.1mm 6130R.894289 - 88.9mm x 42mm x 88.9mm 6130R.895489 - 88.9mm x 54mm x 88.9mm 6130R.896789 - 88.9mm x 66.7mm x 88.9mm 6130R.897689 - 88.9mm x 76.1mm x 88.9mm 6130R.10854108 - 108mm x 54mm x 108mm 6130R.10867108 - 108mm x 66.7mm x 108mm 6130R.10876108 - 108mm x 76.1mm x 108mm 6130R.10889108 - 108mm x 88.9mm x 108mm

Product Images

Approval Holder:

Linhai Yongsheng Pipe Co., Ltd

Company Name

Linhai Yongsheng Pipe Co., Ltd

Address

NO 7-270 FENXI VILLAGE DUQIAO LINHAI

Country

Zhejiang

Phone

0086-576-85528969

View All Listings by this Company

Manufacturer:

Linhai Yongsheng Pipe Co., Ltd

Company Name

Linhai Yongsheng Pipe Co., Ltd

Address

NO 7-270 FENXI VILLAGE DUQIAO LINHAI

Country

Zhejiang

Phone

0086-576-85528969

View All Listings by this Company

Range of press fittings and pipe. Fittings incorporate EPDM ‘O’-rings Maximum working pressure 10 bar. Maximum operating temperature 95°C

Section:

1100 Fittings and Pipe - Compatible Systems

Section Subtitle:

Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2304373

Size:

SEE MODEL

Marking:

Manufacturers logo, TH and size on fitting. Logo and product info on pipe.

Installation Requirements:

R001

Expiry date:

30/04/2028

Model:

M-1-0101-TH 16mm M-1-0103-TH 20mm M-1-0109-TH 26mm M-1-0105-TH 32mm M-1-0106-TH 40mm M-1-0107-TH 50mm M-1-0202-TH 20 x 16mm M-1-0223-TH 26 x 16mm M-1-0225-TH 26 x 20mm M-1-0207-TH 32 x 20mm M-1-0227-TH 32 x 26mm M-1-0211-TH 40 x 20mm M-1-0228-TH 40 x 26mm M-1-0213-TH 40 x 32mm M-1-0229-TH 50 x 26mm M-1-0216-TH 50 x 32mm M-1-0217-TH 50 x 40mm M-1-0301-TH 1/2"M x 16mm M-1-0302-TH 3.4" M x 16mm M-1-0305-TH 1/2" M x 20mm M-1-0306-TH 3/4" M x 20mm M-1-0307-TH 1" M x 20mm M-1-0326-TH 1/2"M x 26mm M-1-0327-TH 3/4"M x 26mm M-1-0328-TH 1" M x 26mm M-1-0313-TH 1"M x 32mm M-1-0314-TH 1 1/4" x 32mm M-1-0317-TH 1 1/4" M x 40mm M-1-0320-TH 1 1/2" M x 50mm M-1-0321-TH 2" M x 50mm M-1-0401-TH 1/2" F x 16mm M-1-0402-TH 3/4" F x 16mm M-1-0408-TH 3/4" F x 20mm M-1-0409-TH 1" F x 20mm M-1-0422-TH 1/2" F x 26mm M-1-0423-TH 3/4" F x 26mm M-1-0424-TH 1" F x 26mm M-1-0415-TH 1" F x 32mm M-1-0408-TH 3/4" F x 20mm M-1-0422-TH 1 1/4" F x 40mm M-1-0419-TH 1 1/2" F x 50mm M-1-3101-TH 1/2" C x 16mm M-1-3104-TH 3/4" C x 20mm M-1-3102-TH 3/4" C x 16mm M-1-3110-TH 3/4" C x 26mm M-1-3111-TH 1" X x 26mm M-1-3113-TH 1" C x 32mm M-1-3301-TH 1/2" C x 16mm M-1-3304-TH 3/4" C x 20mm M-1-3302-TH 15mm C x 16mm M-1-3305-TH 22mm C x 20mm M-1-3401-TH 16mm x1/2" M-1-3402-TH 16mm x 15mm M-1-3403-TH 20mm x 3/4" M-1-3404-TH 20mm x 22mm M-1-3405-TH 26mm x 22mm M-1-3406-TH 26mm x 28mm M-1-3407-TH 26mm x 3/4" M-1-3408-TH 26mm x 1" M-1-3409-TH 32mm x 28mm M-1-0501-TH 16mm M-1-0503-TH 20mm M-1-0509-TH 26mm M-1-0505-TH 32mm M-1-0506-TH 40mm M-1-0507-TH 50mm M-1-3201-TH 16mm x 100mm M-1-3202-TH 16mm x 300mm M-1-0801-TH 1/2" M x 16mm M-1-0805-TH 1/2" M x 20mm M-1-0806-TH 3/4M x 20mm M-1-0813-TH 1" M x 20mm M-1-0816-TH 3/4" M x 26mm M-1-0817-TH 1"M x 26mm M-1-0812-TH 1"M x 32mm M-1-0814-TH 1 1/4" M x 32mm M-1-0901-TH 1/2" F x 16mm M-1-0901CP-TH 1/2" x 16mm CP M-1-0905-TH 1/2" F x 20mm M-1-0906-TH 3/4" F x 20mm M-1-0913-TH 1" F x 20mm M-1-0914-TH 1/2" F x 26mm M-1-0915-TH 3/4" F x 26mm M-1-0916-TH 1" F x 26mm M-1-0912-TH 1"F x 32mm M-1-0917-TH 1 1/4" x 32mm M-1-1101-TH 16mm M-1-1103-TH 20mm M-1-1109-TH 26mm M-1-1105-TH 32mm M-1-1106-TH 40mm M-1-1107-TH 50mm M-1-1202-TH 16 x 16 x 20 M-1-1210-TH 20 x 16 x 16 M-1-1219-TH 20 x 16 x 20 M-1-1207-TH 20 x 20 x 16 M-1-1253-TH 20 x 20 x 26 M-1-1260-TH 26 x 16 x 16 M-1-1246-TH 26 x 16 x 20 M-1-1241-TH 26 x 16 x 26 M-1-1248-TH 26 x 26 x 20 M-1-1243-TH 26 x 20 x 26 M-1-1261-TH 26 x 26 x 16 M-1-1249-TH 26 x 26 x 20 M-1-1259-TH 26 x 26 x 32 M-1-1240-TH 32 x 16 x 32 M-1-1242-TH 32 x 20 x 32 M-1-1262-TH 32 x 26 x 20 M-1-1258-TH 32 x 26 x 26mm M-1-1245-TH 32 x 26 x 32 M-1-1215-TH 32 x 32 x 16 M-1-1217-TH 32 x 32 x 20 M-1-1257-TH 32 x 32 x 26 M-1-1229-TH 40 x 40 x 20 M-1-1261-TH 40 x 40 x 26 M-1-1231-TH 40 x 40 x 32 M-1-1262-TH 50 x 50 x 26 M-1-1234-TH 50 x 50 x 32 M-1-1235-TH 50 x 50 x 40 M-1-1001-TH 1/2" F x 16mm M-1-1004-TH 1/2" F x 20mm M-1-3501 1/2" x 16mm M-1-3502 1/2" x 16mm CP M-1-3503 15mm x 16mm M-1-3504 15mm x 16mm CP M-1-3505 3/4" x 20mm M-1-3506 1" x 26mm M-1-3507 22mm x 20mm M-1-3508 28mm x 26mm M-1-3601-TH 1/2" x 16mm M-1-3602-TH 15mm x 16mm M-1-3603-TH 3/4" x 20mm M-1-3701-TH 16mm x 15mm M-1-3702-TH 20mm x 22mm M-1-3703-TH 26mm x 28mm M-1-3801-TH 16mm x 1/2" M-1-3802-TH 20mm x 3/4" M-1-3803-TH 26mm x 1" M-1-1301-TH 16 x 16 x 1/2"F M-1-1306-TH 20 x 20 x 3/4" F M-1-1331-TH 26 x 26 x 1" F M-1-1313-TH 32 x 32 x 1" F M-1-2601-TH 16mm M-1-2603-TH 20mm M-1-2606-TH 26mm M-1-2605-TH 32mm M-6-2901-TH 16mm

Approval Holder:

Zhejiang Mingshi Xingxin Hvac Technology Co., Ltd.

Company Name

Zhejiang Mingshi Xingxin Hvac Technology Co., Ltd.

Address

No.1-7 Fengye Road Diankou Town Zhuji City

Country

Zhejiang Province

Phone

0086-575-89006963

General Email

manager@ms-piping.com

View All Listings by this Company

‘SR’ range of capillary solder ring copper fittings for use with copper tube EN1057, for above ground use only. Maximum working pressure: 25.0 bar. Maximum operating temperature: 85°C.

Section:

1115 Fittings for use with Tube and Pipe

Section Subtitle:

Capillary, solder ring, lead free. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

240404012

Size:

see models

Marking:

YS, size etched on body

Installation Requirements:

R001

Expiry date:

30/04/2029

Model:

SR STRAIGHT COUPLING C x C: SR5270.08 - 8mm, SR5270.10 - 10mm, SR5270.12 - 12mm, SR5270.15 - 15mm, SR5270.22 - 22mm, SR5270.28 - 28mm, SR5270.35 - 35mm, SR5270.42 - 42mm, SR5270.54 - 54mm. SR SLIP COUPLING C x C: SR5270S.08 - 8mm, SR5270S.10 - 10mm, SR5270S.15 - 15mm, SR5270S.22 - 22mm, SR5270S.28 - 28mm, SR5270S.35 - 35mm, SR5270S.42 - 42mm, SR5270S.54 - 54mm. SR REDUCING COUPLING C x C: SR5240.1008 - 10mm x 8mm, SR5240.1508 - 15mm x 8mm, SR5240.1510 - 15mm x 10mm, SR5240.1512 - 15mm x 12mm, SR5240.2210 - 22mm x 10mm, SR5240.2212 - 22mm x 12mm, SR5240.2215 - 22mm x 15mm, SR5240.2810 - 28mm x 10mm, SR5240.2812 - 28mm x 12mm, SR5240.2815 - 28mm x 15mm, SR5240.2822 - 28mm x 22mm, SR5240.3512 - 35mm x 12mm, SR5240.3515 - 35mm x 15mm, SR5240.3522 - 35mm x 22mm, SR5240.3528 - 35mm x 28mm, SR5240.4215 - 42mm x 15mm, SR5240.4222 - 42mm x 22mm, SR5240.4228 - 42mm x 28mm, SR5240.4235 - 42mm x 35mm, SR5240.5415 - 54mm x 15mm, SR5240.5422 - 54mm x 22mm, SR5240.5428 - 54mm x 28mm, SR5240.5435 - 54mm x 35mm, SR5240.5442 - 54mm x 42mm. SR 90DEG ELBOW C x C: SR5090.08 - 8mm, SR5090.10 - 10mm, SR5090.12 - 12mm, SR5090.15 - 15mm, SR5090.22 - 22mm, SR5090.28 - 28mm, SR5090.35 - 35mm, SR5090.42 - 42mm, SR5090.54 - 54mm. SR 90DEG STREET ELBOW F x C: SR5092.15 - 15mm, SR5092.22 - 22mm, SR5092.28 - 28mm, SR5092.35 - 35mm, SR5092.42 - 42mm, SR5092.54 - 54mm. SR 45DEG ELBOW C x C: SR5041.15 - 15mm, SR5041.22 - 22mm, SR5041.28 - 28mm, SR5041.35 - 35mm, SR5041.42 - 42mm, SR5041.54 - 54mm. SR 45DEG STREET ELBOW C x C: SR5040.15 - 15mm, SR5040.22 - 22mm, SR5040.28 - 28mm, SR5040.35 - 35mm, SR5040.42 - 42mm, SR5040.54 - 54mm. SR FITTING REDUCER F x C: SR5243.1008 - 10mm x 8mm, SR5243.1508 - 15mm x 8mm, SR5243.1510 - 15mm x 10mm, SR5243.1512 - 15mm x 12mm, SR5243.2210 - 22mm x 10mm, SR5243.2212 - 22mm x 12mm, SR5243.2215 - 22mm x 15mm, SR5243.2810 - 28mm x 10mm, SR5243.2812 - 28mm x 12mm, SR5243.2815 - 28mm x 15mm, SR5243.2822 - 28mm x 22mm, SR5243.3512 - 35mm x 12mm, SR5243.3515 - 35mm x 15mm, SR5243.3522 - 35mm x 22mm, SR5243.3528 - 35mm x 28mm, SR5243.4215 - 42mm x 15mm, SR5243.4222 - 42mm x 22mm, SR5243.4228 - 42mm x 28mm, SR5243.4235 - 42mm x 35mm, SR5243.5415 - 54mm x 15mm, SR5243.5422 - 54mm x 22mm, SR5243.5428 - 54mm x 28mm, SR5243.5435 - 54mm x 35mm, SR5243.5442 - 54mm x 42mm. SR EF CAP C x C: SR5301.10 - 10mm, SR5301.12 - 12mm, SR5301.15 - 15mm, SR5301.22 - 22mm, SR5301.28 - 28mm, SR5301.35 - 35mm, SR5301.42 - 42mm, SR5301.54 - 54mm. SR EQUAL TEE C x C: SR5130.08 - 8mm, SR5130.10 - 10mm, SR5130.12 - 12mm, SR5130.15 - 15mm, SR5130.22 - 22mm, SR5130.28 - 28mm, SR5130.35 - 35mm, SR5130.42 - 42mm, SR5130.54 - 54mm. SR PART CROSSOVER F x C: SR5086.12 - 12mm, SR5086.15 - 15mm, SR5086.22 - 22mm. SR CROSSOVER C x C: SR5085.12 - 12mm, SR5085.15 - 15mm, SR5085.22 - 22mm. SR REDUCING TEE: SR5130R.151510 - 15mm x 15mm x 10mm, SR5130R.151522 - 15mm x 15mm x 22mm, SR5130R.221515 - 22mm x 15mm x 15mm, SR5130R.221522 - 22mm x 15mm x 22mm, SR5130R.222215 - 22mm x 22mm x 15mm, SR5130R.282815 - 28mm x 28mm x 15mm, SR5130R.282822 - 28mm x 28mm x 22mm, SR5130R.281528 - 28mm x 15mm x 28mm, SR5130R.281515 - 28mm x 15mm x 15mm, SR5130R.282215 - 28mm x 22mm x 15mm, SR5130R.281522 - 28mm x 15mm x 22mm, SR5130R.282222 - 28mm x 22mm x 22mm, SR5130R.282228 - 28mm x 22mm x 28mm, SR5130R.353515 - 35mm x 35mm x 15mm, SR5130R.353522 - 35mm x 35mm x 22mm, SR5130R.353528 - 35mm x 35mm x 28mm, SR5130R.352835 - 35mm x 28mm x 35mm, SR5130R.424215 - 42mm x 42mm x 15mm, SR5130R.424222 - 42mm x 42mm x 22mm, SR5130R.424228 - 42mm x 42mm x 28mm, SR5130R.424235 - 42mm x 42mm x 35mm, SR5130R.545415 - 54mm x 54mm x 15mm, SR5130R.545422 - 54mm x 54mm x 22mm, SR5130R.545428 - 54mm x 54mm x 28mm, SR5130R.545435 - 54mm x 54mm x 35mm, SR5130R.545442 - 54mm x 54mm x 42mm, SR5130R.544254 - 54mm x 42mm x 54mm. SR STR TAP CONNECTOR: SR5240G.15X1/2 - 15mm x 1/2", SR5240G.15X3/4 - SR STR TAP CONNECTOR 15mm x 3/4", SR5240G.22X3/4 - SR STR TAP CONNECTOR 22mm x 3/4". SR BENT TAP CONNECGTOR: SR5002G.15X1/2 - 15mm x 1/2", SR5002G.15X3/4 - 15mm x 3/4", SR5002G.22X3/4 - 22mm x 3/4", SR5002G.22X1 - 22mm x 1", SR5002G.28X1 - 28mm x 1". SR REDUCER ELBOW: SR5090.2215 - 22mm x 15mm. SR METRIC/IMPERIAL ADAPTOR: SR5270A.15X1/2 - 15mm x ½”, SR5270A.22X3/4 - 22mm x ¾”, SR5270A.28X1 - 28mm x 1".

Product Images

Approval Holder:

Linhai Yongsheng Pipe Co., Ltd

Company Name

Linhai Yongsheng Pipe Co., Ltd

Address

NO 7-270 FENXI VILLAGE DUQIAO LINHAI

Country

Zhejiang

Phone

0086-576-85528969

View All Listings by this Company

Manufacturer:

Linhai Yongsheng Pipe Co., Ltd

Company Name

Linhai Yongsheng Pipe Co., Ltd

Address

NO 7-270 FENXI VILLAGE DUQIAO LINHAI

Country

Zhejiang

Phone

0086-576-85528969

View All Listings by this Company

“DZRCOM” range of DZR brass compression fittings for use with copper pipe (manufactured to EN 1057). The tank connectors incorporate a NBR gasket. The straight tap connectors incorporate a blue fibre gasket. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

1150 Fittings for use with Tube and Pipe

Section Subtitle:

Compression, metal, for use with copper tube - above ground use only.

WRAS Approval Number:

240404038

Size:

See model.

Marking:

Lawton or Lawton tube logo, size and EN1254-2 on nut. CR on body.

Installation Requirements:

R001

Expiry date:

30/04/2029

Model:

DZR Coupler: DZRCOMCP010 - 10mm x 10mm, DZRCOMCP015 - 15mm x 15mm, DZRCOMCP022 - 22mm x 22mm, DZRCOMCP028 - 28mm x 28mm, DZRCOMCP035 - 35mm x 35mm, DZRCOMCP042 - 42mm x 42mm, DZRCOMCP054 - 54mm x 54mm. DZR Reducer Coupler: DZRCOMCP01510 - 15mm x 10mm, DZRCOMCP02215 - 22mm x 15mm. DZR Female Iron Coupling: DZRCOMCPFI0151/2 - 15mm x 1/2"F, DZRCOMCPFI0223/4 - 22mm x 3/4" F, DZRCOMCPFI0221 - 22mm x 1" F, DZRCOMCPFI0281 - 28mm x 1"F, DZRCOMCPFI03511/4 - 35mm x 1 1/4"F, DZRCOMCPFI04211/2 - 42mm x 1 1/2"F, DZRCOMCPFI0542 - 54mm x 2"F. DZR Male Iron Coupling: DZRCOMCPMI0061/4 - 6mm x 1/4"M, DZRCOMCPMI0081/4 - 8mm x 1/4"M, DZRCOMCPMI0103/8 - 10mm x 3/8"M, DZRCOMCPMI0151/2 - 15mm x 1/2"M, DZRCOMCPMI0153/4 - 15mm x 3/4"M, DZRCOMCPMI0223/4 - 22mm x 3/4"M, DZRCOMCPMI0221 - 22mm x 1"M, DZRCOMCPMI0283/4 - 28mm x 3/4"M, DZRCOMCPMI0281 - 28mm x 1"M, DZRCOMCPMI03511/4 - 35mm X 1 1/4" M, DZRCOMCPMI04211/2 - 42mm X 1 1/2" M, DZRCOMCPMI0542 - 54mm X 2" M. DZR Elbow: DZRCOMEL015 - 15mm x 15mm, DZRCOMEL022 - 22mm x 22mm, DZRCOMEL028 - 28mm x 28mm, DZRCOMEL035 - 35mm x 35mm, DZRCOMEL042 - 42mm x 42mm, DZRCOMEL054 - 54mm x 54mm. DZR Female Iron elbow: DZRCOMELFI0151/2 - 15mm x 1/2"F, DZRCOMELFI0223/4 - 22mm x 3/4"F, DZRCOMELFI0221 - 22mm x 1"F, DZRCOMELFI0281 - 28mm x 1"F, DZRCOMELFI03511/4 - 35mm x 1 1/4"F, DZRCOMELFI04211/2 - 42mm x 1 1/2"F, DZRCOMELFI0542 - 54mm x 2"F. DZR Male Iron elbow: DZRCOMELMI0151/2 - 15mm x 1/2"M, DZRCOMELMI0223/4 - 22mm x 3/4"M, DZRCOMELMI0221 - 22mm x 1"M, DZRCOMELMI0281 - 28mm x 1"M, DZRCOMELMI03511/4 - 35mm x 1 1/4"M, DZRCOMELMI04211/2 - 42mm x 1 1/2"M, DZRCOMELMI0542 - 54mm x 2"M. DZR Equal Tee: DZRCOMTE015 - 15mm x 15mm x 15mm, DZRCOMTE022 - 22mm x 22mm x 22mm, DZRCOMTE028 - 28mm x 28mm x 28mm, DZRCOMTE035 - 35mm x 35mm x 35mm, DZRCOMTE042 - 42mm x 42mm x 42mm, DZRCOMTE054 - 54mm x 54mm x 54mm. DZR Reducer Tee: DZRCOMTE0221515 - 22mm x 15mm x 15mm, DZRCOMTE0221522 - 22mm x 15mm x 22mm, DZRCOMTE0222215 - 22mm x 22mm x 15mm, DZRCOMTE0282815 - 28mm x 28mm x 15mm, DZRCOMTE0282822 - 28mm x 28mm x 22mm. DZR Female Tee: DZRCOMTEFI015151/2 - 15mm x 15mm x 1/2” F, DZRCOMTEFI022221/2 - 22mm x 22mm x 1/2” F, DZRCOMTEFI022223/4 - 22mm x 22mm x 3/4” F. DZR End Cap: DZRCOMEC015 - 15mm, DZRCOMEC022 - 22mm, DZRCOMEC028 - 28mm, DZRCOMEC035 - 35mm, DZRCOMEC042 - 42mm, DZRCOMEC054 - 54mm. DZR Tank Connector: DZRCOMTC015 - 15mm, DZRCOMTC022 - 22mm, DZRCOMTC028 - 28mm, DZRCOMTC035 - 35mm, DZRCOMTC042 - 42mm, DZRCOMTC054 - 54mm. DZR Wall Plate Elbow: DZRCOMELWL0151/2 - 15mm x 1/2"F Three Leg, DZRCOMELWL0223/4 - 22mm x 3/4"F Three Leg. DZR Straight Tap Connector: DZRCOMSTC0151/2 - 15mm x 1/2"F, DZRCOMSTC0223/4 - 22mm x 3/4"F. DZR Male Iron Coupler Extended Taper Thread: DZRCOMETTCPMI0153/4 - 15mm x 3/4”, DZRCOMETTCPMI0223/4 - 22mm x 3/4”.

Product Images

Approval Holder:

The Lawton Tube Company Ltd.

Company Name

The Lawton Tube Company Ltd.

Address

Torrington Avenue, Tile Hill, Coventry

Postcode

CV4 9AB

Phone

+44 24 7646 6203 or 024 7646 6203

View All Listings by this Company

IDC ‘BDGxxx’ range of press fittings with brass or nickel plated brass bodies (see model) incorporating EPDM ‘O’-rings and stainless steel crimp sleeves for use with PEX/AL/PEX multilayer pipe (manufactured to EN ISO 21003). The BDG241 and BDG257 prefix models incorporate an EPDM gasket on the captive nut end connection. Pressfit jointing is achieved by either a U or TH crimping profile. Compression connections are for use with copper pipe 12-28mm (manufactured to EN1057) or Irish copper pipe 14.7-27.4mm (manufactured to EN1057). For above ground use only. Maximum working pressure 10.0 bar. 20, 25 & 26mm pressfit sizes cold water use only. Threaded, compression and 16 & 32mm pressfit sizes maximum operating temperature 95°C. From June 2025: The 20, 25 & 26mm pressfit sizes (TH profile only) maximum operating temperature 95°C.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

240404712

Size:

Pressfit: 16, 20, 25, 26 & 32mm. Compression: 12mm, 14.7mm, 15mm, 18mm, 21mm, 22mm, 27.4mm & 28mm. Threaded: ⅜”, ½”, ¾” & 1” BSP (M)/(F) or captive nut.

Marking:

IDC logo: E mark (~E~ within circle), profile type (U or TH), size and PN on fitting body.

Installation Requirements:

R001

Expiry date:

30/04/2029

Model:

Models include a suffix to denote profile and whether brass or nickel plated. -U = brass with U profile. -TH = brass with TH profile. -P-U = nickel plated brass with U profile. -P-TH = nickel plated with TH profile. BDG245 - Straight PEX x PEX (press x press): BDG2450101: 16mm x 16mm, BDG2450301: 20mm x 20mm, BDG2450401: 25mm x 25mm, BDG2450501: 26mm x 26mm, BDG2450601: 32mm x 32mm. BDG244 - Reduce Straight PEX x PEX (press x press): BDG2440101: 20mm x 16mm, BDG2440201: 25mm x 16mm, BDG2440301: 26mm x 16mm, BDG2440601: 25mm x 20mm, BDG2440701: 26mm x 20mm, BDG2440800: 32mm x 16mm, BDG2440702: 32mm x 20mm, BDG2440802: 32mm x 26mm. BDG242 - Straight PEX x Male (press x male): BDG2420101: 16mm x 3/8"M, BDG2420201: 16mm x 1/2"M, BDG2420202: 16mm x 3/4"M, BDG2420501: 20mm x 1/2"M, BDG2420601: 20mm x 3/4"M, BDG2420602: 20mm x 1"M, BDG2420701: 25mm x 3/4"M, BDG2420702: 25mm x 1"M, BDG2420802: 26mm x 1/2"M, BDG2420803: 26mm x 3/4"M, BDG2420804: 26mm x 1"M, BDG2420900: 32mm x 3/4"M, BDG2420901: 32mm x 1"M. BDG243 - Straight PEX x Female (press x female): BDG2430100: 16mm x 3/8"F, BDG2430101: 16mm x 1/2"F, BDG2430102: 16mm x 3/4"F, BDG2430301: 20mm x 1/2"F, BDG2430401: 20mm x 3/4"F, BDG2430402: 20mm x 1"F, BDG2430501: 25mm x 3/4"F, BDG2430601: 25mm x 1"F, BDG2430701: 26mm x 3/4"F, BDG2430801: 26mm x 1"F, BDG2430901: 32mm x 1"F. BDG246 - Stop end (press): BDG246001: 16mm, BDG246003: 20mm, BDG246004: 25mm, BDG246005: 26mm, BDG246006: 32mm. BDG253 - Straight Compression x PEX (compression x press): BDG2530400: 12mmC x 16mm, BDG2530401: 15mmC x 16mm, BDG2530403: 15mmC x 20mm, BDG2530503: 18mmC x 20mm, BDG2530504: 18mmC x 25mm, BDG2530603: 22mmC x 20mm, BDG2530803: 28mmC x 20mm, BDG2530804: 28mmC x 25mm, BDG2530805: 28mmC x 26mm, BDG2530806: 28mmC x 32mm, BDG2531401: 1/2"C x 16mm, BDG2531603: 3/4"C x 20mm, BDG2531605: 3/4"C x 26mm, BDG2531805: 1"C x 26mm, BDG2531806: 1"C x 32mm. BDG241 - Tap connector PEX x Swivel Female (press x captive nut female): BDG2410101: 16 x 3/8"F, BDG2410201: 16 x 1/2"F, BDG2410202: 16 x 3/4"F, BDG2410501: 20 x 1/2"F, BDG2410601: 20 x 3/4"F, BDG2410701: 25 x 3/4"F, BDG2410801: 25 x 1"F, BDG2410803: 26 x 3/4"F, BDG2410804: 26 x 1"F, BDG2410901: 32 x 1"F. BDG249 - Elbow (press): BDG2490101: 16mm, BDG2490201: 20mm, BDG2490301: 25mm, BDG2490401: 26mm, BDG2490501: 32mm. BDG449 - Elbow 45° (press): BDG4490301: 25mm, BDG4490401: 26mm, BDG4490501: 32mm. BDG256 - Elbow PEX x Male (press x male): BDG2560103: 16mm x 3/8"M, BDG2560104: 16mm x 1/2"M, BDG2560106: 16mm x 3/4"M, BDG2560304: 20mm x 1/2"M, BDG2560306: 20mm x 3/4"M, BDG2560308: 20mm x 1"M, BDG2560406: 25mm x 3/4"M, BDG2560408: 25mm x 1"M, BDG2560506: 26mm x 3/4"M, BDG2560508: 26mm x 1"M, BDG2560608: 32mm x 1"M. BDG247 - Elbow PEX x Female (press x female): BDG2470100: 16mm x 3/8"F, BDG2470101: 16mm x 1/2"F, BDG2470102: 16mm x 3/4"F, BDG2470301: 20mm x 1/2"F, BDG2470302: 20mm x 3/4"F, BDG2470303: 20mm x 1"F, BDG2470401: 25mm x 3/4”F, BDG2470402: 25mm x 1”F, BDG2470501: 26mm x 3/4"F, BDG2470502: 26mm x 1"F, BDG2470600: 32mm x 3/4"F, BDG2470601: 32mm x 1"F. BDG248 - Wall Plate PEX x Female (press x female): BDG2480101: 16 x 1/2"F, BDG2480301: 20 x 1/2"F, BDG2480401: 20 x 3/4"F, BDG2480402: 25x 3/4"F, BDG2480403: 25 x 1"F, BDG2480501: 26 x 3/4"F, BDG2480502: 26 x 1"F. BDG257 - Elbow Tap connector PEX x Swivel Female (press x captive nut female): BDG2570103: 16 x 3/8"F, BDG2570104: 16 x 1/2"F, BDG2570106: 16 x 3/4"F, BDG2570304: 20 x 1/2"F, BDG2570306: 20 x 3/4"F, BDG2570401: 25 x 3/4"F, BDG2570402: 25 x 1"F, BDG2570506: 26 x 3/4"F, BDG2570508: 26 x 1"F, BDG2570608: 32 x 1"F. BDG255 - Equal Tee (press): BDG2550101: 16mm, BDG2550301: 20mm, BDG2550401: 25mm, BDG2550501: 26mm, BDG2550601: 32mm. BDG254 - Reduce Tee PEX(Left) x PEX(Right) x PEX(Middle) (press x press x press): BDG2540101: 16 x 20 x 16, BDG2541001: 20 x 16 x 16, BDG2541101: 20 x 16 x 20, BDG2541201: 20 x 20 x 16, BDG2541202: 20 x 26 x 16, BDG2541402: 20 x 26 x 20, BDG2541403: 20 x 32 x 32, BDG2541501: 25 x 16 x 16, BDG2541601: 25 x 16 x 20, BDG2541701: 25 x 16 x 25, BDG2541801: 25 x 20 x 16, BDG2541901: 25 x 20 x 20, BDG2542001: 25 x 20 x 25, BDG2542101: 25 x 25 x 20, BDG2541300: 26 x 16 x 16, BDG2542300: 26 x 16 x 20, BDG2542500: 26 x 20 x 16, BDG2542301: 26 x 16 x 26, BDG2542401: 26 x 20 x 20, BDG2542501: 26 x 20 x 26, BDG2542502: 26 x 26 x 16, BDG2542503: 26 x 26 x 20, BDG2542800: 32 x 20 x 26, BDG2542602: 32 x 32 x 26, BDG2542504: 26 x 32 x 26, BDG2542802: 32 x 32 x 20, BDG2542803: 32 x 16 x 32, BDG2542801: 32 x 20 x 32, BDG2542601: 32 x 26 x 26, BDG2542701: 32 x 26 x 32. BDG250 - Reduce Tee PEX(Left) x PEX(Right) x Male(Middle) (press x male x press): BDG2500101: 16 x 1/2"M x 16, BDG2500301: 20 x 1/2"M x 20, BDG2500302: 20 x 3/4"M x 20, BDG2500401: 25 x 3/4"M x 25, BDG2500402: 25 x 1"M x 25, BDG2500500: 26 x 1/2"M x 26, BDG2500501: 26 x 3/4"M x 26, BDG2500502: 26 x 1"M x 26, BDG2500600: 32 x 1/2"M x 32, BDG2500601: 32 x 3/4"M x 32, BDG2500701: 32 x 1"M x 32. BDG251 - Reduce Tee PEX(Left) x PEX(Right) x Female(Middle) (press x female x press): BDG2510101: 16 x 1/2"F x 16, BDG2510301: 20 x 1/2"F x 20, BDG2510302: 20 x 3/4"F x 20, BDG2510303: 26 x 1/2"F x 26, BDG2510304: 26 x 3/4"F x 20, BDG2510306: 26 x 3/4"F x 26, BDG2510308: 26 x 1"F x 26, BDG2510401: 25x3/4"F x 25, BDG2510402: 25x1"F x 25, BDG2510500: 32 x 1/2"F x 32, BDG2510501: 32 x 3/4"F x 32, BDG2510502: 32 x 1"F x 32.

Product Images

Approval Holder:

IDC Plumbing & Heating Technology (Beijing) Co., Ltd.

Company Name

IDC Plumbing & Heating Technology (Beijing) Co., Ltd.

Address

3rd Floor, Unit 2, Building 2, Section A Zhaowei Science & Technology Park No. 14, Jiuxianqiao Road Chaoyang District Beijing

Postcode

100015

Country

China

Phone

008610 51659550 ext 312

General Email

Jerry.tang@idcgroup.com.cn

View All Listings by this Company

Manufacturer:

IDC FLUID CONTROL CO., LTD.

Company Name

IDC FLUID CONTROL CO., LTD.

Address

Mechanical & Electrical Industrial Zone Yuhuan City Zhejiang Province

Country

China

General Email

View All Listings by this Company

Range of end feed copper fittings for use with copper tube manufactured to EN1057, for above ground use only. Maximum working pressure 25.0 bar. Maximum operating temperature 85℃.

Section:

1210 Fittings for use with Tube and Pipe

Section Subtitle:

End feed, for use with copper tube. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

240404011

Size:

see models

Marking:

YS, size etched on body.

Installation Requirements:

R001

Expiry date:

30/04/2029

Model:

EF STRAIGHT COUPLING C x C: 5270.08 - 8mm 5270.10 - 10mm 5270.12 - 12mm 5270.15 - 15mm 5270.22 - 22mm 5270.28 - 28mm 5270.35 - 35mm 5270.42 - 42mm 5270.54 - 54mm EF SLIP COUPLING C x C: 5270S.08 - 8mm 5270S.10 - 10mm 5270S.12 - 12mm 5270S.15 - 15mm 5270S.22 - 22mm 5270S.28 - 28mm 5270S.35 - 35mm 5270S.42 - 42mm 5270S.54 - 54mm EF REDUCING COUPLING C x C: 5240.1008 - 10mm x 8mm 5240.1508 - 15mm x 8mm 5240.1510 - 15mm x 10mm 5240.1512 - 15mm x 12mm 5240.2210 - 22mm x 10mm 5240.2212 - 22mm x 12mm 5240.2215 - 22mm x 15mm 5240.2810 - 28mm x 10mm 5240.2812 - 28mm x 12mm 5240.2815 - 28mm x 15mm 5240.2822 - 28mm x 22mm 5240.3512 - 35mm x 12mm 5240.3515 - 35mm x 15mm 5240.3522 - 35mm x 22mm 5240.3528 - 35mm x 28mm 5240.4215 - 42mm x 15mm 5240.4222 - 42mm x 22mm 5240.4228 - 42mm x 28mm 5240.4235 - 42mm x 35mm 5240.5415 - 54mm x 15mm 5240.5422 - 54mm x 22mm 5240.5428 - 54mm x 28mm 5240.5435 - 54mm x 35mm 5240.5442 - 54mm x 42mm EF 90DEG ELBOW C x C: 5090.08 - 8mm 5090.10 - 10mm 5090.12 - 12mm 5090.15 - 15mm 5090.22 - 22mm 5090.28 - 28mm 5090.35 - 35mm 5090.42 - 42mm 5090.54 - 54mm EF 90DEG STREET ELBOW F x C: 5092.08 - 8mm 5092.10 - 10mm 5092.12 - 12mm 5092.15 - 15mm 5092.22 - 22mm 5092.28 - 28mm 5092.35 - 35mm 5092.42 - 42mm 5092.54 - 54mm EF 45DEG ELBOW C x C: 5041.08 - 8mm 5041.10 - 10mm 5041.12 - 12mm 5041.15 - 15mm 5041.22 - 22mm 5041.28 - 28mm 5041.35 - 35mm 5041.42 - 42mm 5041.54 - 54mm EF 45DEG STREET ELBOW F x C: 5040.08 - 8mm 5040.10 - 10mm 5040.12 - 12mm 5040.15 - 15mm 5040.22 - 22mm 5040.28 - 28mm 5040.35 - 35mm 5040.42 - 42mm 5040.54 - 54mm EF FITTING REDUCER F x C: 5243.1008 - 10mm x 8mm 5243.1508 - 15mm x 8mm 5243.1510 - 15mm x 10mm 5243.1512 - 15mm x 12mm 5243.2210 - 22mm x 10mm 5243.2212 - 22mm x 12mm 5243.2215 - 22mm x 15mm 5243.2810 - 28mm x 10mm 5243.2812 - 28mm x 12mm 5243.2815 - 28mm x 15mm 5243.2822 - 28mm x 22mm 5243.3512 - 35mm x 12mm 5243.3515 - 35mm x 15mm 5243.3522 - 35mm x 22mm 5243.3528 - 35mm x 28mm 5243.4215 - 42mm x 15mm 5243.4222 - 42mm x 22mm 5243.4228 - 42mm x 28mm 5243.4235 - 42mm x 35mm 5243.5415 - 54mm x 15mm 5243.5422 - 54mm x 22mm 5243.5428 - 54mm x 28mm 5243.5435 - 54mm x 35mm 5243.5442 - 54mm x 42mm EF CAP C x C: 5301.10 - 10mm 5301.12 - 12mm 5301.15 - 15mm 5301.22 - 22mm 5301.28 - 28mm 5301.35 - 35mm 5301.42 - 42mm 5301.54 - 54mm EF EQUAL TEE C x C: 5130.08 - 8mm 5130.10 - 10mm 5130.12 - 12mm 5130.15 - 15mm 5130.22 - 22mm 5130.28 - 28mm 5130.35 - 35mm 5130.42 - 42mm 5130.54 - 54mm EF PART CROSSOVER F x C: 5086.12 - 12mm 5086.15 - 15mm 5086.22 - 22mm EF REDUCING TEE C x C: 5130R.151510 - 15mm x 15mm x 10mm 5130R.151512 - 15mm x 15mm x 12mm 5130R.151522 - 15mm x 15mm x 22mm 5130R.221515 - 22mm x 15mm x 15mm 5130R.221522 - 22mm x 15mm x 22mm 5130R.222215 - 22mm x 22mm x 15mm 5130R.222228 - 22mm x 22mm x 28mm 5130R.282815 - 28mm x 28mm x 15mm 5130R.282822 - 28mm x 28mm x 22mm 5130R.281528 - 28mm x 15mm x 28mm 5130R.281515 - 28mm x 15mm x 15mm 5130R.282215 - 28mm x 22mm x 15mm 5130R.281522 - 28mm x 15mm x 22mm 5130R.282222 - 28mm x 22mm x 22mm 5130R.282228 - 28mm x 22mm x 28mm 5130R.353515 - 35mm x 35mm x 15mm 5130R.353522 - 35mm x 35mm x 22mm 5130R.353528 - 35mm x 35mm x 28mm 5130R.352235 - 35mm x 22mm x 35mm 5130R.352835 - 35mm x 28mm x 35mm 5130R.352815 - 35mm x 28mm x 15mm 5130R.352822 - 35mm x 28mm x 22mm 5130R.352828 - 35mm x 28mm x 28mm 5130R.424215 - 42mm x 42mm x 15mm 5130R.424222 - 42mm x 42mm x 22mm 5130R.424228 - 42mm x 42mm x 28mm 5130R.424235 - 42mm x 42mm x 35mm 5130R.423542 - 42mm x 35mm x 42mm 5130R.423528 - 42mm x 35mm x 28mm 5130R.423535 - 42mm x 35mm x 35mm 5130R.545415 - 54mm x 54mm x 15mm 5130R.545422 - 54mm x 54mm x 22mm 5130R.545428 - 54mm x 54mm x 28mm 5130R.545435 - 54mm x 54mm x 35mm 5130R.545442 - 54mm x 54mm x 42mm 5130R.544254 - 54mm x 42mm x 4mm 5130R.544242 - 54mm x 42mm x 42mm EF 90DEG BEND C x C: 5002.08 - 8mm 5002.10 - 10mm 5002.12 - 12mm 5002.15 - 15mm 5002.22 - 22mm 5002.28 - 28mm 5002.35 - 35mm 5002.42 - 42mm 5002.54 - 54mm EF CROSSOVER C x C: 5085.12 - 12mm 5085.15 - 15mm 5085.22 - 22mm EF 180DEG RETURN BEND C x C: 5060.10 - 10mm 5060.12 - 12mm 5060.15 - 15mm 5060.22 - 22mm 5060.28 - 28mm 5060.35 - 35mm 5060.42 - 42mm 5060.54 - 54mm METRIC IMPERIAL ADAPTOR: 5270G.15X1/2 - 15mm x 1/2" 5270G.22X3/4 - 22mm x 3/4" 5270G.28X1 - 28mm x 1" 5270G.35X1-1/4 - 35mm x 1-1/4" EF REDUCER ELBOW C x C: 5090.22X15 - 22mm x 15mm EF 90DEG STREET BEND F x C: 5001.08 - 8mm 5001.10 - 10mm 5001.12 - 12mm 5001.15 - 15mm 5001.22 - 22mm 5001.28 - 28mm 5001.35 - 35mm 5001.42 - 42mm 5001.54 - 54mm EF STR TAP CONNECTOR: 5240G.15X1/2 - 15mm x 1/2" 5240G.15X3/4 - 15mm x 3/4" 5240G.22X3/4 - 22mm x 3/4" 5240G.22X1 - 22mm x 1" 5240G.28X1 - 28mm x 1" EF BENT TAP CONNECTOR: 5002A.15X1/2 - 15mm x 1/2" 5002A.15X3/4 - 15mm x 3/4" 5002A.22X3/4 - 22mm x 3/4" 5002A.22X1 - 22mm x 1" 5002A.28X1 - 28mm x 1" EF LONG FITTING: L5243.1508 - 15mm x 8mm L5243.1510 - 15mm x 10mm

Product Images

Approval Holder:

Linhai Yongsheng Pipe Co., Ltd

Company Name

Linhai Yongsheng Pipe Co., Ltd

Address

NO 7-270 FENXI VILLAGE DUQIAO LINHAI

Country

Zhejiang

Phone

0086-576-85528969

View All Listings by this Company

Manufacturer:

Linhai Yongsheng Pipe Co., Ltd

Company Name

Linhai Yongsheng Pipe Co., Ltd

Address

NO 7-270 FENXI VILLAGE DUQIAO LINHAI

Country

Zhejiang

Phone

0086-576-85528969

View All Listings by this Company

Range of dual flush syphonic WC flush valves. Cold water use only.

Section:

1305 Flushing Mechanisms

Section Subtitle:

WC. Except where specified, flushing valves within this section have only completed a limited number of the performance and endurance tests as stated in the "Regulators Specification for WC suites installed after 1st January 2001". The flush volume of valves within this section have not been verified by test. When installed in combination with a WC cistern and pan, further performance tests will be required.

WRAS Approval Number:

240402703

Size:

1 1/2” BSP (M)

Marking:

ECOTECH and Model on top of cap

Installation Requirements:

R001 R571 R581

Expiry date:

30/04/2029

Model:

B4620 B4621

Product Images

Approval Holder:

ECO (Xiamen) Technology INC.

Company Name

ECO (Xiamen) Technology INC.

View All Listings by this Company

Manufacturer:

ECO (Xiamen) Technology INC.

Company Name

ECO (Xiamen) Technology INC.

View All Listings by this Company