Directory Search Results

Print List

#240902020

Range of TPE shower hoses (various finishes) with EPDM seals. Open outlet use only. Maximum operating temperature 60.0°C

Section:
1860 Tubes
Section Subtitle:
Plastic hoses.
WRAS Approval Number:
240902020
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
½” BSP (F) Captive nut
Marking:
Axor on nut
Installation Requirements:
R001
Expiry date:
30/09/2029
Model:
28 282 xx0 28 284 xx0 28 286 xx0 Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
Product Images

Approval Holder:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Country
Germany
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company
Manufacturer:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Country
Germany
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Print This Approval


#240988004

Range of stainless steel inter-locked shower hoses incorporating PVC linings in various finishes. Maximum operating temperature 65°C.

Section:
1863 Tubes
Section Subtitle:
Elastomeric.
WRAS Approval Number:
240988004
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Note:
Open outlet use only
Size:
See model
Marking:
PPI, WRAS & year of manufacture (yyyy) on ferrule
Installation Requirements:
R001 R040
Expiry date:
30/09/2029
Model:
SHS(D)(C)-A-B-L-F (SHS(08/10)(P/B/S)–Connection A - Connection B– Length - different finish) SHS – The name of our Stainless Steel Shower Tube D(08/10) – 08=DN8 or 10=DN10 C(P/B/S) – P=Plastics Core Only DN8, B=Brass Core or S=Stainless Steel Core A-B – Connection A and Connection B (from 01 to 10) 01 = F1/2 knurled nut, 02 = F1/2 hex nut , 03 = F1/2 Conical Connection Shell knurled nut, 04 = F1/2 Conical Connection Housing with O-ring nut, 05 = F1/2 Conical Connection Shell without O-ring nut, 06 = F1/2 Conical Connection, 07 = T connection, 08 = M15×1 connection, 09 = M22×1connection(L=20-30)and 10=F1/2 cone-shaped connection anti winding (Connections 01, 02, 04, 05, 06, 07, 08, 09 & 10 applicable for DN8 hoses and Connection 01, 02, 03 & 06 applicable for DN10 hoses) L (XXX) Length (15cm to 200cm): 015=15cm 200=200cm F (XXX) different finish (Chrome Finish No suffix), Chrome = No suffix, Brushed brass = BGP, PVD Gold = PVD, Brushed Nickel = BN1, Gun Metal = GMG and Electrolytic Polished = EP1 For example: "SHS08B-01-04-150 would be DN8, Brass Core,F1/2 x F1/2 Conical Connection Housing with O-ring nut , 150cm long, Chrome Finish" and "SHS10S-01-05-150-PVD would be DN10,Stainless Steel Core,F1/2 xF1/2 Conical Connection Shell without O-ring nut, 150cm long, PVD Gold Finish."
Product Images

Approval Holder:
PPI Xiamen Industry Co., Ltd.
Company Name
PPI Xiamen Industry Co., Ltd.
Address
No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen
Postcode
361022
Country
China
General Email
heatheryang@xmppi.com

View All Listings by this Company
Manufacturer:
PPI Xiamen Industry Co., Ltd.
Company Name
PPI Xiamen Industry Co., Ltd.
Address
No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen
Postcode
361022
Country
China
General Email
heatheryang@xmppi.com

View All Listings by this Company

Print This Approval


#240902704

Range of unvented storage cylinders. The secondary circuit is factory fitted with a temperature and pressure relief valve set at 6.0 bar at 95˚C and an expansion relief valve set at 4.5 bar. The product is supplied with a safety group consisting of a pressure reducing valve set at 3.0 bar, and an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection). Also supplied with an expansion vessel and tundish. Maximum working pressures: Secondary circuit: 4.0 Bar Primary Circuit: 3.0 Bar Solar circuit: 6.0 Bar Maximum operating temperature 99.0°C

Section:
1890 Unvented Heating Apparatus
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
Secondary circuit: 22mm compression. Primary circuit: 22/28mm compression. Solar coil: 22/28mm compression
Marking:
Gledhill, model name, date of manufacture (DD/MM/YYYY), Capacity, max pressure, max temp and other technical information on label on body of cylinder.
Installation Requirements:
R001 R140 R360
Expiry date:
30/09/2029
Model:
PLUDR090 PLUDR120 PLUDR150 PLUDR180 PLUDR210 PLUDR250 PLUDR300 PLUDR090SL PLUDR120SL PLUDR150SL PLUDR180SL PLUDR210SL PLUDR180S PLUDR210S PLUDR250S PLUDR300S PLUDR400S PLUDR180SSL PLUDR210SSL PLUIN090 PLUIN120 PLUIN150 PLUIN180 PLUIN210 PLUIN250 PLUIN300 PLUIN400 PLUIN060SL PLUIN090SL PLUIN120SL PLUIN150SL PLUIN180SL PLUIN210SL PLUIN180S PLUIN210S PLUIN250S PLUIN300S PLUIN400S PLUIN180SSL PLUIN210SSL Note: PLU - Plus – Gledhill plus Build Spec PRO - Pro - Gledhill professional build spec DR- Dir – Direct IN - Ind – Indirect HP – Heat pump S - Sol – Solar H - Horiz – Horizontal SH – Solar Horizontal DUO – CYL/BUF – Cylinder and buffer combination PP – Pre Plumb – Pre-plumbed SP- System plus SR -System ready EE – external expansion UV – unvented SL - Slim – Slimline
Product Images

Approval Holder:
Gledhill Building Products Ltd
Company Name
Gledhill Building Products Ltd
Address
Sycamore Estate Blackpool
Postcode
FY4 3RL
Phone
(01253) 474439

View All Listings by this Company
Manufacturer:
Gledhill Building Products Ltd
Company Name
Gledhill Building Products Ltd
Address
Sycamore Estate Blackpool
Postcode
FY4 3RL
Phone
(01253) 474439

View All Listings by this Company

Print This Approval


#240902705

Range of unvented storage cylinders. The secondary circuit is factory fitted with a temperature and pressure relief valve set at 6.0 bar at 95˚C and an expansion relief valve set at 4.5 bar. The product is supplied with a safety group consisting of a pressure reducing valve set at 3.0 bar, and an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Also supplied with an expansion vessel and tundish. Maximum working pressures: Secondary circuit: 4.0 Bar Primary Circuit: 3.0 Bar Solar circuit: 6.0 Bar Maximum operating temperature 99.0°C

Section:
1890 Unvented Heating Apparatus
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
Secondary circuit: 22mm compression. Primary circuit: 22/28mm compression. Solar coil: 22/28mm compression
Marking:
Gledhill, model name, date of manufacture (DD/MM/YYYY), Capacity, max pressure, max temp and other technical information on label on body of cylinder.
Installation Requirements:
R001 R140 R360
Expiry date:
30/09/2029
Model:
PLUIN180H PLUIN210H PLUIN250H PLUIN300H PLUIN180SH PLUIN210SH PLUIN250SH PLUIN300SH Note: PLU - Plus – Gledhill plus Build Spec PRO - Pro - Gledhill professional build spec DR- Dir – Direct IN - Ind – Indirect HP – Heat pump S - Sol – Solar H - Horiz – Horizontal SH – Solar Horizontal DUO – CYL/BUF – Cylinder and buffer combination PP – Pre Plumb – Pre-plumbed SP- System plus SR -System ready EE – external expansion UV – unvented SL - Slim – Slimline

Approval Holder:
Gledhill Building Products Ltd
Company Name
Gledhill Building Products Ltd
Address
Sycamore Estate Blackpool
Postcode
FY4 3RL
Phone
(01253) 474439

View All Listings by this Company
Manufacturer:
Gledhill Building Products Ltd
Company Name
Gledhill Building Products Ltd
Address
Sycamore Estate Blackpool
Postcode
FY4 3RL
Phone
(01253) 474439

View All Listings by this Company

Print This Approval


#240902706

Range of unvented storage cylinders. The secondary circuit is factory fitted with a temperature and pressure relief valve set at 6.0 bar at 95˚C and an expansion relief valve set at 4.5 bar. The product is supplied with a safety group consisting of a pressure reducing valve set at 3.0 bar, and an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Supplied with an expansion vessel and tundish. Maximum working pressures: Secondary circuit: 4.0 Bar Primary Circuit: 3.0 Bar Solar circuit: 6.0 Bar Maximum operating temperature 99.0°C

Section:
1890 Unvented Heating Apparatus
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
Secondary circuit: 22mm compression. Primary circuit: 22/28mm compression. Solar coil: 22/28mm compression
Marking:
Gledhill, model name, date of manufacture (DD/MM/YYYY), Capacity, max pressure, max temp and other technical information on label on body of cylinder.
Installation Requirements:
R001 R140 R360
Expiry date:
30/09/2029
Model:
PLUHP180 PLUHP210 PLUHP250 PLUHP300 PLUHP400 PLUHP180S PLUHP210S PLUHP250S PLUHP300S PLUHP400S PLUHP180SL PLUHP210SL PLUHP200DUO PLUHP300DUO PLUHP200DUOPP PLUHP300DUOPP Note: PLU - Plus – Gledhill plus Build Spec PRO - Pro - Gledhill professional build spec DR- Dir – Direct IN - Ind – Indirect HP – Heat pump S - Sol – Solar H - Horiz – Horizontal SH – Solar Horizontal DUO – CYL/BUF – Cylinder and buffer combination PP – Pre Plumb – Pre-plumbed SP- System plus SR -System ready EE – external expansion UV – unvented SL - Slim – Slimline

Approval Holder:
Gledhill Building Products Ltd
Company Name
Gledhill Building Products Ltd
Address
Sycamore Estate Blackpool
Postcode
FY4 3RL
Phone
(01253) 474439

View All Listings by this Company
Manufacturer:
Gledhill Building Products Ltd
Company Name
Gledhill Building Products Ltd
Address
Sycamore Estate Blackpool
Postcode
FY4 3RL
Phone
(01253) 474439

View All Listings by this Company

Print This Approval


#240902707

Range of unvented storage cylinders. The secondary circuit is factory fitted with a temperature and pressure relief valve set at 6.0 bar at 95˚C and an expansion relief valve set at 4.5 bar. The product is supplied with a safety group consisting of a pressure reducing valve set at 3.0 bar, and an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Supplied with an expansion vessel and tundish. Maximum working pressures: Secondary circuit: 4.0 Bar Primary Circuit: 3.0 Bar Solar circuit: 6.0 Bar Maximum operating temperature 99.0°C

Section:
1890 Unvented Heating Apparatus
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
Secondary circuit: 22mm compression. Primary circuit: 22/28mm compression. Solar coil: 22/28mm compression
Marking:
Gledhill, model name, date of manufacture (DD/MM/YYYY), Capacity, max pressure, max temp and other technical information on label on body of cylinder.
Installation Requirements:
R001 R140 R360
Expiry date:
30/09/2029
Model:
PRODR090 PRODR120 PRODR150 PRODR180 PRODR210 PRODR250 PRODR300 PROIN090 PROIN120 PROIN150 PROIN180 PROIN210 PROIN250 PROIN300 PROIN120PP PROIN150PP PROIN180PP PROIN210PP PROIN250PP PROIN300PP PROIN120PPSP PROIN150PPSP PROIN180PPSP PROIN210PPSP PROIN250PPSP PROIN300PPSR PROIN120PPSR PROIN150PPSR PROIN180PPSR PROIN210PPSR PROIN250PPSR PROIN300PPSR Note: PLU - Plus – Gledhill plus Build Spec PRO - Pro - Gledhill professional build spec DR- Dir – Direct IN - Ind – Indirect HP – Heat pump S - Sol – Solar H - Horiz – Horizontal SH – Solar Horizontal DUO – CYL/BUF – Cylinder and buffer combination PP – Pre Plumb – Pre-plumbed SP- System plus SR -System ready EE – external expansion UV – unvented SL - Slim – Slimline

Approval Holder:
Gledhill Building Products Ltd
Company Name
Gledhill Building Products Ltd
Address
Sycamore Estate Blackpool
Postcode
FY4 3RL
Phone
(01253) 474439

View All Listings by this Company
Manufacturer:
Gledhill Building Products Ltd
Company Name
Gledhill Building Products Ltd
Address
Sycamore Estate Blackpool
Postcode
FY4 3RL
Phone
(01253) 474439

View All Listings by this Company

Print This Approval


#240904718

Range of Compress 5800i AW vertical cased and insulated indirect unvented stainless steel hot water storage cylinders fitted with a Caleffi 309508 CST temperature and pressure relief valve set at 10 bar & 90°C, and supplied with a Caleffi inlet control group consisting of in-line pressure reducing valve (set at 3.5 bar) and pressure relief valve (set at 6 bar) and incorporates an approved check valve cartridge (verified by test suitable for backflow protection against Fluid Category 2). The cyclinders also supplied with an 18L expansion vessel and Intatec filling loop assembley (FL12041510). Maximum working pressure 10 bar. Maximum operating temperature 80°C.

Section:
1890 Unvented Heating Apparatus
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
22mm compression.
Marking:
Bosch, Model, Serial No, Pressure ratings, Capacity and other technical information on adhesive label on control box.
Installation Requirements:
R001 R140 R360
Expiry date:
30/09/2029
Model:
7 731 600 271 CS5800iAW 180 MCP (Slimline) 7 731 600 272 CS5800iAW 210 MP 7 731 600 273 CS5800iAW 250 MP
Product Images

Approval Holder:
Worcester Bosch
Company Name
Worcester Bosch
Address
Cotswold Way Warndon Worcester
Postcode
WR4 9SW
Country
United Kingdom
Phone
+44 1905 752761
General Email
ian.sharp@uk.bosch.com

View All Listings by this Company
Manufacturer:
Worcester Bosch
Company Name
Worcester Bosch
Address
Cotswold Way Warndon Worcester
Postcode
WR4 9SW
Country
United Kingdom
Phone
+44 1905 752761
General Email
ian.sharp@uk.bosch.com

View All Listings by this Company

Print This Approval


#240902061

Range of single/double orifice air venting valves with blue epoxy coated ductile iron bodies, and a stainless-steel float ball. Incorporating EPDM washers. Maximum working pressure 16.0 Bar. Maximum operating temperature 80.0°C.

Section:
1980 Valves
Section Subtitle:
Air venting. Fittings in this section are suitable for above ground installations only.
WRAS Approval Number:
240902061
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
½”, ¾”, 1”, 1 ¼”, 1 ½”, 2”, 3” - BSP (F). DN80, DN100 & DN150 - Flanged.
Marking:
AFFCO logo, DN, PN, date of manufacture (MM/YYYY) and other technical data on data plate on body.
Installation Requirements:
R001
Expiry date:
30/09/2029
Model:
S824
Product Images

Approval Holder:
AFFCO Flow Control (Shanghai) Co. Ltd.
Company Name
AFFCO Flow Control (Shanghai) Co. Ltd.
Address
Fengxian District, No.99, Desheng Road, Fengcheng Town Shanghai City, China

View All Listings by this Company
Manufacturer:
AFFCO Flow Control (Shanghai) Co. Ltd.
Company Name
AFFCO Flow Control (Shanghai) Co. Ltd.
Address
Fengxian District, No.99, Desheng Road, Fengcheng Town Shanghai City, China

View All Listings by this Company

Print This Approval


#241204706

Range of air venting valves with blue epoxy coated ductile iron bodies and a plastic float. Maximum working pressure16.0 bar. Cold water use only.

Section:
1980 Valves
Section Subtitle:
Air venting. Fittings in this section are suitable for above ground installations only.
WRAS Approval Number:
241204706
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
DN50, DN80, DN100, DN150, DN200, DN250
Marking:
Bermad, size, model, PN, serial number on body.
Installation Requirements:
R001 R535
Expiry date:
30/09/2029
Model:
C70-2" C70-3" C70-4" C70-6" C70-8" C70-10"

Approval Holder:
Bermad CS Ltd
Company Name
Bermad CS Ltd
Address
Kibbutz Evron 2280800, Israel

View All Listings by this Company
Manufacturer:
Bermad CS Ltd
Company Name
Bermad CS Ltd
Address
Kibbutz Evron 2280800, Israel

View All Listings by this Company

Print This Approval


#240904012

Range of wall mounted concealed, manual blending valves with a brass body (various finishes), incorporating a ceramic cartridge headwork with a single lever type operating member. Maximum working pressure 5.0 Bar. Maximum operating temperature 60°C.

Section:
2000 Shower Valves
Section Subtitle:
Shower valve(s) with manual temperature control.
WRAS Approval Number:
240904012
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
½” BSP (F)
Marking:
Villeroy & Boch logo on operating memeber
Installation Requirements:
R001 R040
Expiry date:
30/09/2029
Model:
TVS107001000XX Liberty XX= Finishing 61= Chrome 64=Brushed Nickel 76=Brushed gold K5= Matt black
Product Images

Approval Holder:
Villeroy & Boch AG
Company Name
Villeroy & Boch AG
Address
Saaruferstraße 1-3 Mettlach
Postcode
66693
Country
Germany
Phone
+49 151 16775778
General Email
Finkler.Marc@villeroy-boch.com

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 624 of 854

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.