Range of deck mounted, single hole, single outlet (fixed) electronically controlled tap assemblies (chromium plated brass). Flow is controlled with a solenoid valve activated via touch operation. Temperature is controlled using a manual single lever operating member. The spout outlets incorporate plastic aerators. The inlets incorporate an approved check valve cartridge; however the complete assemblies have not been fully tested to demonstrate they provide backflow protection, and a stainless steel strainer. Maximum working pressure 8.0 bar. Maximum operating temperature 65°C.

Section:

0684 Combination Tap Assemblies

Section Subtitle:

Tap(s) with a non-touch methods of flow control and a single inlet.

WRAS Approval Number:

240902027

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

Stainless steel braided PEX lined flexible hose assemblies with a 3/8" BSP captive nut end connector.

Marking:

Stern on body

Installation Requirements:

R001 R006 R010

Expiry date:

30/09/2029

Model:

Green Time 1000B AB1953 (two inlets, battery powered) Green Time 1000E AB1953 (two inlets, transformer powered) Green Time 1000 AB1953 (two inlets, transformer powered)

Approval Holder:

Y. Stern Engineering (1989) Ltd

Company Name

Y. Stern Engineering (1989) Ltd

Address

15 Gan Rave Blvd. Yavne

Postcode

8122217

Country

Israel

Phone

+972 8 9326007

General Email

leah@sternfaucets.com

View All Listings by this Company

Range of floor mounted single hole, single outlet (fixed), combination tap assembly (various plated brass), incorporating a ceramic cartridge headwork with a single lever operating member and a manual diverter to shower outlet with a dome type operating member. The spout outlet incorporates a plastic flow straightener. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.

Section:

0675 Combination Tap Assemblies

Section Subtitle:

Multi-hole tap(s) with a single outlet and a fixed spout, incorporating a self-cancelling diverter to a shower outlet.

WRAS Approval Number:

240902044

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

Stainless steel braided EPDM lined flexible hose assemblies incorporating ½” BSP (F) captive nut end connections.

Marking:

Lanbiao on operating member

Installation Requirements:

R001 R020

Expiry date:

30/09/2029

Model:

F9918-XX Where XX denotes the finish and can be replaced with any of the following: No Suffix = Chrome H = Black DYB = Matte White BZ = Perl White Painted HGTS = Red Bronze HTL = Yellow Bronze Brushed Q = Bronze QTSL = Bronze Brushed Bright WTS = Bronze Brushed Matte STS = Acid Copper Brushed SDMGJ = Water Plated Rose Gold N = Nickel Brushed Bright Light NP = Nickel Brushed TJ = Titanium Gold TJLS = Titanium Gold Brushed G = Gold GJS = Gold Brushed GJSY = Zirconium Gold Wire Drawing Matte PGJFY = Zirconium Gold Wire Drawing Matte Bright Light PLSJ = Brushed Gold LSJY = Brushed Gold Matte MGJ = Rose GHold MGJL = Rose Gold Brushed DMGJ = Light Rose Gold Brushed HTS = Red Bronze Brushed QHP = Grey LSQH = Grey Brushed LHMGJ = Brushed Yellow Rose Gold

Product Images

Approval Holder:

TAIZHOU LANBIAO SANITARY WARE CO., LTD

Company Name

TAIZHOU LANBIAO SANITARY WARE CO., LTD

Address

Xudou Villiage Qinggang Yuhuan Zhejiang

Postcode

317606

Country

China

Phone

18957382651

General Email

957989256@qq.com

View All Listings by this Company

Manufacturer:

TAIZHOU LANBIAO SANITARY WARE CO., LTD

Company Name

TAIZHOU LANBIAO SANITARY WARE CO., LTD

Address

Xudou Villiage Qinggang Yuhuan Zhejiang

Postcode

317606

Country

China

Phone

18957382651

General Email

957989256@qq.com

View All Listings by this Company

Range of ceramic cartridge headworks with a plastic body, incorporating silicone seals. The products are intended for insertion into specifically dimensioned tap assemblies. Maximum working pressure 17.5 bar. Maximum operating temperature 70°C.

Section:

0440 Headworks

Section Subtitle:

Headwork(s) for installation into specifically dimensioned taps or shower valve bodies.

WRAS Approval Number:

241002048

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See models

Marking:

S.C.C (Shinhan Ceramic logo) on body.

Installation Requirements:

R001

Expiry date:

31/10/2029

Model:

35 SMJR / CA0351368 - Ø35mm. 40 SMJR / CA0401105 - Ø40mm. 25 SMJF / CA0250049 - Ø25mm. Model added June 2025: 25 VJR / CA0250051 - Ø25mm.

Product Images

Approval Holder:

Shinhan Ceramic Co., Ltd.

Company Name

Shinhan Ceramic Co., Ltd.

Address

367, Sihwa venture-ro, Siheung-si, Gyeonggi-do, 5117

Country

Korea, Republic of

Phone

+82-31-498-3174

View All Listings by this Company

Thermostatic cartridge incorporating a plastic body and EPDM ‘O’-rings. For insertion into specifically dimensioned bores. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.

Section:

0442 Thermostatic cartridges

Section Subtitle:

Thermostatic cartridge(s) for installation into specifically dimensioned tap or shower valve bodies.

WRAS Approval Number:

241002004

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

30mm O.D.

Marking:

HG on body.

Installation Requirements:

R001

Expiry date:

31/10/2029

Model:

30615930.

Product Images

Approval Holder:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, Schiltach

Postcode

77761

Country

Germany

Phone

+49 170 4471 718

General Email

Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Range of single hole, single outlet (fixed) combination tap assemblies (brass bodies – various finishes) incorporating a ceramic cartridge headwork with single lever type operating member. The spout outlet incorporates a plastic flow straightener. Maximum working pressure 5.0 Bar. Maximum operating temperature 60°C.

Section:

0450 Combination Tap Assemblies

Section Subtitle:

Single hole tap(s) with a single outlet and a fixed spout.

WRAS Approval Number:

240904013

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Note:

Some products are supplied with lever type pop up waste – not verified by test. See below models.

Size:

Stainles steel braided PEX lined flexible hose assemblies incorporating a 3/8” BSP (F) captive nut end connections

Marking:

Villeroy & Boch on operating memeber

Installation Requirements:

R001 R006 R009 R010

Expiry date:

30/09/2029

Model:

TVW107001000XX Liberty - with waste set TVW122001000XX Empora TVW107001001XX Liberty TVW122008000XX Empora TVW107002000XX Liberty TVW107003000XX Liberty - with waste set TVW122002000XX Empora TVW107003001XX Liberty TVW122009000XX Empora TVW107004000XX Liberty TVW122003000XX Empora TVW107005000XX Liberty TVW122004000XX Empora TVW107006000XX Liberty TVW122005000XX Empora XX= Finishing 61= Chrome 64=Brushed Nickel 76=Brushed gold K5= Matt black

Product Images

Approval Holder:

Villeroy & Boch AG

Company Name

Villeroy & Boch AG

Address

Saaruferstraße 1-3 Mettlach

Postcode

66693

Country

Germany

Phone

+49 151 16775778

General Email

Finkler.Marc@villeroy-boch.com

View All Listings by this Company