`Water block` range of self-closing valves with either a natural (white), blue or grey plastic body and a gear driven volume-controlled operation device. The product incorporates a stainless-steel strainer. The product is designed to stop the flow of water once a preset value (in litres) has been reached. User intervention is then required to reset it. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.

Section:

2335 Valves

Section Subtitle:

Stop, plastic, self-closing.

WRAS Approval Number:

250202701

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Note:

R008 only applies to the natural (white) body version. The self-closing function once a pre-set value has been reached has not been assessed and is not considered to be covered by the scope of this approval.

Size:

¾” BSP (F) inlet and ¾” BSP (M) outlet.

Marking:

Eltek, Flow arrow, Water block and Minimum flow rate on body.

Installation Requirements:

R001 R008

Expiry date:

28/02/2030

Model:

100041XX. Where ‘xx’ denotes the setting notches regulation and packaging type to either a ‘0’ or ‘9’.

Approval Holder:

Eltek SpA

Company Name

Eltek SpA

Address

Strada Valenza 5/A Casale Monferrato

Postcode

15033

Country

Italy

Phone

+39 0142 335511

General Email

f.ruzzafante@eltekgroup.it

View All Listings by this Company

Range of pilot operated electronic flow control valves having flow control facility intended to be controlled via solenoid valves, with auxiliary components including stainless steel tubing, cock valves, needle valve and a stainless-steel strainer. Maximum working pressure 16.0 Bar. Maximum operating temperature 60.0°C.

Section:

2337 Valves

Section Subtitle:

Stop, electrical pilot operated control.

WRAS Approval Number:

241202706

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

Flanged - DN40 (1.5”), DN50 (2”), DN65 (21/2”), DN80 (3”), DN100 (4”), DN 150 (6”), DN200 (8”) DN 250 (10”), DN 300 (12”), DN400 (16”).

Marking:

BERMAD, DN, flow arrow and size on body. Model number and PN on data plate

Installation Requirements:

R001

Expiry date:

31/12/2029

Model:

700EN/ES Series Control Valves, Models: 718 EN/ES Electronic Control Valves

Product Images

Approval Holder:

Bermad CS Ltd

Company Name

Bermad CS Ltd

Address

Kibbutz Evron 2280800, Israel

View All Listings by this Company

Range of double regulating valves available with DZR brass, lead free brass or bronze bodies (see models). Products incorporate a non-rising spindle headwork. Products also include two test ports. Maximum working pressure 25.0 bar. Maximum operating temperature 85°C.

Section:

2348 Valves

Section Subtitle:

Balancing.

WRAS Approval Number:

241108011

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

1/2” Rc or Rp NPT and BSPP (F x F) (DN15) – 2” Rc or Rp NPT and BSPP BSP (F x F) (DN50).

Marking:

ALBION & WRAS on cap PN, DN, CR, size & Flow arrow on body

Installation Requirements:

R001 R120

Expiry date:

30/11/2029

Model:

DZR Brass: ART62 DN15 ART62 DN20 ART62 DN25 ART62 DN32 ART62 DN40 ART62 DN50 Bronze: ART362 DN15 ART362 DN20 ART362 DN25 ART362 DN32 ART362 DN40 ART362 DN50 . Lead free brass: ART62A DN15 ART62A DN20 ART62A DN25 ART62A DN32 ART62A DN40 ART62A DN50

Approval Holder:

Albion Valves (UK) Limited

Company Name

Albion Valves (UK) Limited

Address

9a Fallbank Industrial Estate Dodworth Barnsley

Postcode

S75 3LS

Country

United Kingdom

Phone

01226 729900

General Email

samjed@albionvalvesuk.com

View All Listings by this Company

Range of manually operated balancing valves with DZR brass bodies. Maximum working pressure: 20.0 Bar. Maximum operating temperature: 85.0°C.

Section:

2348 Valves

Section Subtitle:

Balancing.

WRAS Approval Number:

241202023

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See Models

Marking:

V&G Logo, CR, WRAS, size, flow arrow, pressure and date of manufacture YY/MM on body

Installation Requirements:

R001

Expiry date:

31/12/2029

Model:

23.00022.G15.CP5R-7000 (1/2” BSP (F)), 23.00022.G20.CP5R-7000 (3/4” BSP (F)), 23.00022.G25.CP5R-7000 (1” BSP (F)).

Product Images

Approval Holder:

Zhejiang Valogin Technology Co Ltd

Company Name

Zhejiang Valogin Technology Co Ltd

Address

Qinggang Technological Ind. Zone, Yuhuan, Taizhou Zhejiang

Country

China

Phone

+86 (0)574 8907 1560

View All Listings by this Company

Range of UV disinfection units with stainless steel bodies and quartz tube. Maximum working pressure 8.0 bar. Cold water use only.

Section:

2411 Disinfection Equipment

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

9.5mm Spigot. ¾” Male BSP & 1” Male BSP.

Marking:

Daro UV Systems on body

Installation Requirements:

R001 R150 R170

Expiry date:

31/10/2029

Model:

ECO series comprising of models: ECO 08, ECO 1, ECO 2, ECO 3 & ECO 5.

Product Images

Approval Holder:

Daro UV Systems

Company Name

Daro UV Systems

Address

Unit 9 Ballingdon Hill Industrial Estate, Sudbury, Suffolk

Postcode

CO10 1GE

Country

United Kingdom

Phone

01787370187

General Email

info@darouv.co.uk

View All Listings by this Company

'CELCON F20-03 BKM'. Black coloured, injection moulded POM material. For use with water up to 85°C.

Section:

5015 Acetal

Section Subtitle:

Material only. Components made from materials listed in this section may be required to be submitted for audit tests.

WRAS Approval Number:

2109568

Expiry date:

30/09/2026

Approval Holder:

Celanese Europe B.V.

Company Name

Celanese Europe B.V.

Address

The New Atrium, 6th floor, Strawinskylaan 3105, 1077 ZX, Amsterdam

Country

Netherlands

View All Listings by this Company

'CELCON F10-01 T2, F10-02, F10-03H, F20-03M, F25-03 & F30-03M'. The following grades were added to the approval in April 2023: ‘CELCON F30-34, F10-01, F10-03HM, F20-03, F25-03M & F30-03’. Natural, unpigmented (white in appearance), injection moulded POM materials. All the grades listed can be coloured using the following masterbatch CELCON MB-S315F (black coloured masterbatch). All are for use with water up to 85°C.

Section:

5015 Acetal

Section Subtitle:

Material only. Components made from materials listed in this section may be required to be submitted for audit tests.

WRAS Approval Number:

2303561

Expiry date:

31/03/2028

Approval Holder:

Celanese Europe B.V.

Company Name

Celanese Europe B.V.

Address

The New Atrium, 6th floor, Strawinskylaan 3105, 1077 ZX, Amsterdam

Country

Netherlands

View All Listings by this Company

'CELCON F10-03H BBK & CELCON F10-03H BK'. Black coloured, injection moulded POM materials. For use with water up to 85°C. 'CELCON F10-52H'. Natural (appears white), injection moulded POM material. For use with water up to 40°C.

Section:

5015 Acetal

Section Subtitle:

Material only. Components made from materials listed in this section may be required to be submitted for audit tests.

WRAS Approval Number:

2309553

Expiry date:

30/09/2028

Approval Holder:

Celanese Europe B.V.

Company Name

Celanese Europe B.V.

Address

The New Atrium, 6th floor, Strawinskylaan 3105, 1077 ZX, Amsterdam

Country

Netherlands

View All Listings by this Company

'FORMOCON FM090'. White coloured, injection moulded POM material. For use with water up to 85°C.

Section:

5015 Acetal

Section Subtitle:

Material only. Components made from materials listed in this section may be required to be submitted for audit tests.

WRAS Approval Number:

241255014

Expiry date:

31/12/2029

Approval Holder:

Formosa Plastics Corporation

Company Name

Formosa Plastics Corporation

Address

3 Chung-Yang Industrial Park, Hsin-Kang, Chiayi Hsien

Country

Taiwan

View All Listings by this Company

'FORMOCON FM270'. White coloured, injection moulded POM material. For use with water up to 85°C.

Section:

5015 Acetal

Section Subtitle:

Material only. Components made from materials listed in this section may be required to be submitted for audit tests.

WRAS Approval Number:

241255015

Expiry date:

31/12/2029

Approval Holder:

Formosa Plastics Corporation

Company Name

Formosa Plastics Corporation

Address

3 Chung-Yang Industrial Park, Hsin-Kang, Chiayi Hsien

Country

Taiwan

View All Listings by this Company