Range of copper, bronze or DZR brass capillary solder ring fittings for use with copper pipe (manufactured to EN 1057). Maximum working pressure and operating temperatures: 8-28mm: 25.0 bar @ 30°C, 16.0 bar @ 100°C. 35-54mm: 25.0 bar @ 30°C, 16.0 bar @ 65°C and 10.0 bar @ 100°C.

Section:

1115 Fittings for use with Tube and Pipe

Section Subtitle:

Capillary, solder ring, lead free. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

240202065

Size:

See model.

Marking:

AL (abbreviation of Allpex Limited), size, LF, CR (DZR brass models only) and 1254 on body.

Installation Requirements:

R001

Expiry date:

28/02/2029

Model:

Copper fittings: SC10 - Straight Coupler: CxC: SC10-8: 8mm. SC10-10: 10mm. SC10-12: 12mm. SC10-15: 15mm. SC10-22: 22mm. SC10-28: 28mm. SC10-35: 35mm. SC10-42: 42mm. SC10-54: 54mm. SC10S - Slip Coupling: CxC: SC10S-15: 15mm. SC10S-22: 22mm. SC10S-28: 28mm. SC10S-35: 35mm. SC10S-42: 42mm. SC10S-54: 54mm. SC10X- Full Crossover: CxC: SC10X-15: 15mm. SC10X-22: 22mm. SC10XF - Part Crossover: FtgxC: SC10XF-15: 15mm. SC10XF-22: 22mm. SC11 - Reducing Coupler: CxC: SC11-108: 10mm x 8mm. SC11-158: 15mm x 8mm. SC11-1510: 15mm x 10mm. SC11-1512: 15mm x 12mm. SC11-2215: 22mm x 15mm. SC11-2815: 28mm x 15mm. SC11-2822: 28mm x 22mm. SC11-3515: 35mm x 15mm. SC11-3522: 35mm x 22mm. SC11-3528: 35mm x 28mm. SC11-4215: 42mm x 15mm. SC11-4222: 42mm x 22mm. SC11-4228: 42mm x 28mm. SC11-4235: 42mm x 35mm. SC11-5415: 54mm x 15mm. SC11-5422: 54mm x 22mm. SC11-5428: 54mm x 28mm. SC11-5435: 54mm x 35mm. SC11-5442: 54mm x 42mm. SC11F - Fitting Reducer: FtgxC: SC11F-108: 10mm x 8mm. SC11F-158: 15mm x 8mm. SC11F-1510: 15mm x 10mm. SC11F-1512: 15mm x 12mm. SC11F-2215: 22mm x 15mm. SC11F-2815: 28mm x 15mm. SC11F-2822: 28mm x 22mm. SC11F-3515: 35mm x 15mm. SC11F-3522: 35mm x 22mm. SC11F-3528: 35mm x 28mm. SC11F-4215: 42mm x 15mm. SC11F-4222: 42mm x 22mm. SC11F-4228: 42mm x 28mm. SC11F-4235: 42mm x 35mm. SC11F-5415: 54mm x 15mm. SC11F-5422: 54mm x 22mm. SC11F-5428: 54mm x 28mm. SC11F-5435: 54mm x 35mm. SC11F-5442: 54mm x 42mm. SC11FL- Long Fittinf Reducer: FtgxC: SC11FL-158: 15mm x 8mm. SC11FL-1510: 15mm x 10mm. SC11MI - Metric x Imp Coupler: CxC: SC11Ml-15D: 15mm x 1/2" O.D.. SC11Ml-22E: 22mm x 3/4" O.D.. SC11Ml-28F: 28mm x 1" O.D.. SC11Ml-35G: 35mm x 1.1/4" O.D.. SC16 - St Swivel Connector: Cxfi: SC16-15D: 15mm x 1/2" BSP Captive Nut. SC16-15E: 15mm x 3/4" BSP Captive Nut. SC16-22E: 22mm x 3/4" BSP Captive Nut. SC16C - ST Cylinder Connector: CxFi: SC16C-22F: 22mm x 3/4” BSP Captive Nut. SC16C-28F: 28mm x 1" BSP Captive Nut. SC17 - End Cap: SC17-8: 8mm. SC17-10: 10mm. SC17-12: 12mm. SC17-15: 15mm. SC17-22: 22mm. SC17-28: 28mm. SC17-35: 35mm. SC17-42: 42mm. SC17-54: 54mm. SC17A- Air vent cap: CxVent: SC17A-15: 15mm. SC17A-22: 22mm. SC17AF -Air vent Plug: fitting end: SC17AF-15: 15mm. SC20- Elbow: 90deg: CxC: SC20-8: 8mm. SC20-10: 10mm. SC20-12: 12mm. SC20-15: 15mm. SC20-22: 22mm. SC20-28: 28mm. SC20-35: 35mm. SC20-42: 42mm. SC20-54: 54mm. SC20F - Street Elbow: FtgxC: SC20F-15: 15mm. SC20F-22: 22mm. SC20F-28: 28mm. SC20F-35: 35mm. SC20F-42: 42mm. SC20F-54: 54mm. SC25 - Obtuse Elbow,135/45: CxC: SC25-15: 15mm. SC25-22: 22mm. SC25-28: 28mm. SC25-35: 35mm. SC25-42: 42mm. SC25-54: 54mm. SC25F - Fitting Obtuse Elbow: CxFtg: SC25F-15: 15mm. SC25F-22: 22mm. SC25F-28: 28mm. SC26 - Bent Swivel Connector: CxFi: SC26-15D: 15mm x 1/2" BSP Captive Nut. SC26-22E: 22mm x 3/4" BSP Captive Nut. SC26C - Bent Cylindrical Connector: CxFi: SC26C-22F: 22mm x 1” BSP Captive Nut. SC30 - Equal Tee: CxCxC: SC30-8: 8mm. SC30-10: 10mm. SC30-12: 12mm. SC30-15: 15mm. SC30-22: 22mm. SC30-28: 28mm. SC30-35: 35mm. SC30-42: 42mm. SC30-54: 54mm. SC31- Reducing Tee: CxCxC: SC31-151522: 15mm x 15mm x 22mm. SC31-221515: 22mm x 15mm x 15mm. SC31-221522: 22mm x 15mm x 22mm. SC31-222215: 22mm x 22mm x 15mm. SC31-222228: 22mm x 22mm x 28mm. SC31-281515: 28mm x 15mm x 15mm. SC31-281522: 28mm x 15mm x 22mm. SC31-281528: 28mm x 15mm x 28mm. SC31-282215: 28mm x 22mm x 15mm. SC31-282222: 28mm x 22mm x 22mm. SC31-282228: 28mm x 22mm x 28mm. SC31-282815: 28mm x 28mm x 15mm. SC31-282822: 28mm x 28mm x 22mm. SC31-352222: 35mm x 22mm x 22mm. SC31-353515: 35mm x 35mm x 15mm. SC31-353522: 35mm x 35mm x 22mm. SC31-353528: 35mm x 35mm x 28mm. SC31-423535: 42mm x 35mm x 35mm. SC31-424215: 42mm x 42mm x 15mm. SC31-424222: 42mm x 42mm x 22mm. SC31-424228: 42mm x 42mm x 28mm. SC31-424235: 42mm x 42mm x 35mm. SC31-544254: 54mm x 42mm x 54mm. SC31-545415: 54mm x 54mm x 15mm. SC31-545422: 54mm x 54mm x 22mm. SC31-545428: 54mm x 54mm x 28mm. SC31-545435: 54mm x 54mm x 35mm. SC31-545442: 54mm x 54mm x 42mm. Bronze fittings: SG12-Male Coupler: SG12-35G: 35mm x 1.1/4” BSPT (M). SG12-42H: 42mm x 1.1/2" BSPT (M). SG12-54I: 54mm x 2" BSPT (M). SG14-Female Coupler: SG14-35G: 35mm x 1.1/4" BSPT (F). SG14-42H: 42mm x 1.1/2" BSPT (F). SG14-54I: 54mm x 2" BSPT (F). DZR Brass fittings: SD12-Male Coupler: SD12-15D: 15mm x 1/2" BSPT (M). SD12-22E: 22mm x 3/4" BSPT (M). SD12-28F: 28mm x 1” BSPT (M). SD12F-Male Fitting Adaptor Ftg x Mi: SD12F-15D: 15mm x 1/2” BSPT (M). SD12F-22E: 22mm x 3/4" BSPT (M). SD12F-28F: 28mm x 1” BSPT (M). SD14-Female Coupler: SD14-15D: 15mm x 1/2" BSPT (F). SD14-22E: 22mm x 3/4" BSPT (F). SD14-28F: 28mm x 1" BSPT (F). SD14F-Female fittings adaptor: SD14F-15D: 15mm x 1/2” BSPT (F). SD14F-22D: 22mm x 1/2" BSPT (F). SD14F-22E: 22mm x 3/4" BSPT (F). SD14F-28F: 28mm x 1” BSPT (F). SD17-End cap: SD17-8: 8mm. SD22- Male Elbow: CxMi: SD22-15D: 15mm x 1/2" BSPT (M). SD22-22E: 22mm x 3/4" BSPT (M). SD22-28F: 28mm x 1" BSPT (M). SD24- Female Elbow: Cxfi: SD24-15D: 15mm x 1/2” BSPT (F). SD24-22D: 22mm x 1/2" BSPT (F). SD24-22E: 22mm x 3/4" BSPT (F). SD24-28F: 28mm x 1” BSPT (F). SD29-Wall Plate Elbow: SD29-15D: 15mm x 1/2" BSPT (F).

Product Images

Approval Holder:

Allpex Ltd.

Company Name

Allpex Ltd.

Address

261 Water Road, Abbeydale Industrial Estate, Wembley Middlesex

Postcode

HA0 1HX

Country

United Kingdom

Phone

00 44 208 810 4546

General Email

product@allpex.com

View All Listings by this Company

Range of copper brazed, stainless steel heat exchangers available with between 4 & 70 plates. Maximum working pressure 50 bar. Maximum operating temperature 100°C

Section:

1350 Heat Exchangers

Size:

½” BSP (M), ¾” BSP (M), 1” BSP (M)

Marking:

Adhesive label on body stating SWEP, Serial No., Model No., Type, Max Pressure & other tech info Qr code and number etched on plate body

Installation Requirements:

R001

Expiry date:

28/02/2029

Model:

8DW-M

Approval Holder:

SWEP International AB/SWEP Slovakia s.r.o.

Company Name

SWEP International AB/SWEP Slovakia s.r.o.

Address

Box 105, 26122, Landskrona

Country

Sweden

Phone

+46 418400406

View All Listings by this Company

Manufacturer:

SWEP International AB/SWEP Slovakia s.r.o.

Company Name

SWEP International AB/SWEP Slovakia s.r.o.

Address

Box 105, 26122, Landskrona

Country

Sweden

Phone

+46 418400406

View All Listings by this Company

CZ4000 range of in-line water meters with polyamide bodies and EPDM rubber `O` rings. The meters incorporate a plastic strainer. Maximum working pressure 16.0 Bar

Non-metallic materials and components comply with BS6920 at 50°C

Section:

1505 Water Meters

Size:

¾” BSP M Inlet x Outlet

Marking:

Contazara , Model, Pressure, CE and other information on faceplate.

Installation Requirements:

R001

Expiry date:

31/12/2028

Model:

CZ4000 Range DN 15 110mm DN 15 115mm DN 15 134mm DN 15 165mm DN 15 170mm DN 15 190mm DN 20 110mm DN 20 115mm DN 20 134mm DN 20 165mm DN 20 170mm DN 20 190mm

Approval Holder:

Contadores De Agua De Zaragoza S.A. (Contazara S.A.)

Company Name

Contadores De Agua De Zaragoza S.A. (Contazara S.A.)

Address

Carretera Castellon KM. 5 5 50720 Zaragoza Spain

View All Listings by this Company

Range of water meters with blue epoxy coated ductile iron bodies, plastic measurement chambers and vanes and NBR ‘O’-rings. Maximum working pressure 16.0 bar. Maximum operating temperature 50°C.

Section:

1505 Water Meters

Size:

Flanged inlet/outlet: DN40, 50, 65, 80, 100, 125, 150, 200, 250, 300, 350, 400.

Marking:

GAER, size, Model number and pressure rating and product info on dial face. Flow arrow & size on side of body,

Installation Requirements:

R001

Expiry date:

29/02/2028

Model:

WP-SDC GAER

Approval Holder:

Hidroglobal Tecnologia del Agua S.A.

Company Name

Hidroglobal Tecnologia del Agua S.A.

Address

C/ GARBÍ 3 Pol.Ind. Can Volart PARETS DEL VALLÈS

Postcode

08150

Country

Spain

Phone

+34 93 573 74 00

General Email

acalderon@regaber.com

View All Listings by this Company

Range of pressure reducing valve assemblies with brass bodies incorporating spherical stop valve, pressure gauge and double check valve cartridges, verified by test (suitable for backflow protection against Fluid Category 3). Models TVAP250001 & TVAP250005 also incorporate a water meter port. Maximum supply pressure 16 bar. Outlet pressure setting is adjustable in the range 1.5 to 6 bar. Maximum operating temperature 65°C

Section:

1510 Water Meter Manifolds

Size:

See Model

Marking:

Reliance logo, size, PN, DR cast into body Pressure, maximum temperature and reliance on body of PRV.

Installation Requirements:

R001

Expiry date:

28/02/2029

Model:

TVAP250001 ¾” BSP (F) x ¾” BSP (F) TVAP250005 1” BSP (F) x 1” BSP (F) TVAP250050 ¾” BSP (F) x ¾” BSP (F) TVAP250055 1” BSP (F) x 1” BSP (F)

Product Images

Approval Holder:

Reliance Worldwide Corporation

Company Name

Reliance Worldwide Corporation

Address

Horton Road, West Drayton

Postcode

UB7 8JL

Country

United Kingdom

Phone

+44 7730 052060

General Email

PETER.LANCASTER@RWC.COM

View All Listings by this Company

Water meter manifold assembly with gunmetal body, incorporating a servicing valve and a single check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Max operating pressure 16 bar Maximum operating temperature Cold water only

Section:

1510 Water Meter Manifolds

Size:

¾ BSP (F)

Marking:

Flow arrow inlet and outlet sizes and Company logo (e.g Waterfit, WF)

Installation Requirements:

R001

Expiry date:

28/02/2029

Model:

MK8000003184

Approval Holder:

Waterfit Ltd

Company Name

Waterfit Ltd

Address

PO Box 28 293 Birmingham New Road Dudley

Postcode

DY1 4SJ

Country

West Midlands

Phone

0121 5207987

General Email

enquiries@waterfit.co.uk

View All Listings by this Company

Range of DZR brass metering stations supplied with red and blue test points for upstream and downstream port identification. Maximum working pressure 25.0 bar. Maximum operating temperature 99°C.

Non-metallic materials and components comply with BS6920 at 85°C

Section:

1530 Miscellaneous Fittings

Size:

See models.

Marking:

Size, PN25, HNH Hatersley logo, flow arrow and model on body.

Installation Requirements:

R001 R120

Expiry date:

31/01/2029

Model:

Fig 1000, Fig 1000 (Low Flow) & Fig 1000M (Medium Flow): Inlet: ½” screwed ISO 228 parallel BSPP (F). Outlet: ½” taper threaded to BS EN 10266-2 BSPT (M). Fig 1000: Inlet: ¾”, 1”, 1¼”, 1½” or 2” taper threaded BS EN 10226-2 BSPT (F). Outlet: ¾”, 1”, 1¼”, 1½” or 2” taper threaded BS EN 10226-2 BSPT (M).

Product Images

Approval Holder:

Hattersley

Company Name

Hattersley

Address

11-15 Epsilon Terrace West Road Ipswich Suffolk

Postcode

IP3 9FJ

Country

United Kingdom

Phone

0766465023

General Email

tturner@cranebsu.com

View All Listings by this Company

Range of ancillary connections with brass bodies (various finishes). Maximum working pressure 5.0 bar. Maximum operating temperature 85°C.

Section:

1535 Miscellaneous

Section Subtitle:

Tap accessories.

WRAS Approval Number:

240402009

Marking:

Lefroy Brooks logo on nut except ‘PTE’ models that have Lefroy brooks logo on body.

Installation Requirements:

R001

Expiry date:

30/04/2029

Model:

XX 1903 YY: European eccentric wall mounted connections - ½” BSP (M) x 1” BSP captive nut. XX 2109 YY: Bath and shower mixer wall mounted return bends - ¾” BSP male x 1” BSP captive nut. XX 2118 YY: Extended reach bath and shower mixer return bends - ¾” BSP male x 1” BSP captive nut. XX 2119 YY: Extended reach cranked surface mounting bath & shower mixer legs - ¾” BSP male x 1” BSP captive nut. XX 2125 YY: Cranked surface mounting bath & shower mixer legs - ¾” BSP male x 1” BSP captive nut. XX 2114 YY: Bath and shower mixer floor mounted standpipes - 22mm copper stub x 1” BSP captive nut. EXT XX 2114 YY: Extended reach bath and shower mixer floor mounted standpipes - 22mm copper stub x 1” BSP captive nut. PTE008 YY: European exposed thermostatic shower valve inlet connection elbows - ½” x ¾” BSP (M) x ¾” captive nut outlet. PTE006 YY: Exposed thermostatic shower valve inlet connection elbows - 15mm compression x ¾” captive nut. ‘YY’ Denotes available surface finishes, these are: - CP - Polished Chrome - NK - Polished Nickel - BC - Brushed Chrome - BN - Brushed Nickel - PB - Polished Brass - BPB - Brushed Brass - AB - Aged Brass - TA - Taunton - AG - Antique Gold - HRG - Hard Rubbed Gold - CM - Champagne Gold - BCM - Brushed Champagne Gold - CO - Copper - MBC - Matt Black Chrome

Approval Holder:

Lefroy Brooks

Company Name

Lefroy Brooks

Address

Unit 3 Marston Industrial Estate Marston Road Wolverhampton

Postcode

WV2 4LX

Country

United Kingdom

Phone

01902 390 891

General Email

rob@lefroybrooks.co.uk

View All Listings by this Company

Range of ‘Pulsify’ shower hose, handset and riser rail sets (plastic bodies - various finishes). Maximum working pressure: Open outlet. Maximum operating temperature: 60.0°C

Section:

1650 Shower Outlets

Section Subtitle:

Shower head(s) and/or shower handset(s).

WRAS Approval Number:

240188002

Size:

TPE lined shower hose with PVC outer and ½” captive nut end connections.

Marking:

24 370 xx0: Shower Hose – Hansgrohe on conical nut. Shower Handset – Hansgrohe on body. Riser Rail – Hansgrohe on handset holder. 24 371 xx0: Shower Hose – Hansgrohe on conical nut. Shower Handset – Hansgrohe on body. Riser Rail – Hansgrohe on handset holder. 24 380 xx0: Shower Hose – Hansgrohe on conical nut. Shower Handset – Hansgrohe on body. Riser Rail – Hansgrohe on handset holder. 24 381 xx0: Shower Hose – Hansgrohe on conical nut. Shower Handset – Hansgrohe on body. Riser Rail – Hansgrohe on handset holder. 24 372 xx0: Shower Hose – Hansgrohe on conical nut. Shower Handset – Hansgrohe on body. Riser Rail – Hansgrohe on handset holder. 24 373 xx0: Shower Hose – Hansgrohe on conical nut. Shower Handset – Hansgrohe on body. Riser Rail – Hansgrohe on handset holder. 24 382 xx0: Shower Hose – Hansgrohe on conical nut. Shower Handset – Hansgrohe on body. Riser Rail – Hansgrohe on handset holder. 24 383 xx0: Shower Hose – Hansgrohe on conical nut. Shower Handset – Hansgrohe on body. Riser Rail – Hansgrohe on handset holder.

Installation Requirements:

R001 R040

Expiry date:

31/01/2029

Model:

24 370 xx0 - Hansgrohe Pulsify E - Shower set 100 1jet EcoSmart with shower bar - 65cm, 24 371 xx0 - Hansgrohe Pulsify E - Shower set 100 1jet EcoSmart+ with shower bar - 65cm, 24 380 xx0 - Hansgrohe Pulsify E - Shower set 100 1jet EcoSmart with shower bar - 90 cm, 24 381 xx0 - Hansgrohe Pulsify E - Shower set 100 1jet EcoSmart+ with shower bar - 90 cm. Models added May 2024: 24 372 xx0 - Hansgrohe Pulsify S - Shower set 100 1jet EcoSmart with shower bar - 65cm, 24 373 xx0 - Hansgrohe Pulsify S - Shower set 100 1jet EcoSmart+ with shower bar - 65cm, 24 382 xx0 - Hansgrohe Pulsify S - Shower set 100 1jet EcoSmart with shower bar - 90 cm, 24 383 xx0 - Hansgrohe Pulsify S - Shower set 100 1jet EcoSmart+ with shower bar - 90 cm. Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.

Product Images

Approval Holder:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, Schiltach

Postcode

77761

Country

Germany

Phone

+49 170 4471 718

General Email

Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Manufacturer:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, Schiltach

Postcode

77761

Country

Germany

Phone

+49 170 4471 718

General Email

Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Range of shower handsets and overhead shower with various finishes. Model HS149 incorporates a stainless steel strainer washer at the inlet. Maximum operating temperature 65°C.

Section:

1650 Shower Outlets

Section Subtitle:

Shower head(s) and/or shower handset(s).

WRAS Approval Number:

240708001

Size:

See models.

Marking:

Shower Handsets PPI on rear of handset Overhead Shower PPI on inlet

Installation Requirements:

R001 R040

Expiry date:

31/07/2029

Model:

HS148 – ½” BSP (M) HS148 MBK - ½” BSP (M) HS148 BGP - ½” BSP (M) HS318 - ½” BSP (M) HS318 MBK - ½” BSP (M) HS318 BGP - ½” BSP (M) HS149 - ½” BSP (F)

Approval Holder:

PPI Xiamen Industry Co., Ltd.

Company Name

PPI Xiamen Industry Co., Ltd.

Address

No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen

Postcode

361022

Country

China

General Email

heatheryang@xmppi.com

View All Listings by this Company

Manufacturer:

PPI Xiamen Industry Co., Ltd.

Company Name

PPI Xiamen Industry Co., Ltd.

Address

No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen

Postcode

361022

Country

China

General Email

heatheryang@xmppi.com

View All Listings by this Company