'MC-PROOF 4210 AE'. Site applied, grey coloured (once mixed), two-component polyol and prepolymer based coating. Mix Part A (grey liquid) with Part B (amber liquid) in a volume ratio of 1:1 and apply as per manufacturer's TDS '07.10.2025'. Cure for 24 hours@7°C. For use with water up to 60°C. This material is only approved for the mixing and curing conditions that appear on the approval. If the mix and/or cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:

5042 Coatings, Paints & Linings

Section Subtitle:

Site applied pipe and fittings coatings. Compliance with BS6920 relates to the conditions of cure specified in the listing. If the cure conditions are varied from those described below then compliance with BS6920 cannot be assummed without further testing. Where catalysts are required, only tested catalysts in the recommended concentrations should be used. Manufacturer's advice must be sought if any non standard mixing or curing conditions are being considered.

WRAS Approval Number:

2305567

Expiry date:

31/05/2028

Approval Holder:

Dow Chemical Company

Company Name

Dow Chemical Company

Address

5 Oakwater Park, Cheadle Royal Business Park, Cheadle

Postcode

SK8 3SR

View All Listings by this Company

‘TECHNYL ® SAFE D 219WFC V30 BK’ & ‘TECHNYL ® SAFE D 219WFC V50 BK’. Black coloured, injection moulded, glass fibre reinforced polyamide 6.10 materials. For use with water up to 85°C.

Section:

5180 Nylon

Section Subtitle:

Material only. Components made from materials listed in this section may be required to be submitted for audit tests.

WRAS Approval Number:

260155011

Expiry date:

31/01/2031

Approval Holder:

POLYTECHNYL S.A.S. Member of DOMO Chemicals

Company Name

POLYTECHNYL S.A.S. Member of DOMO Chemicals

Address

Usine de Belle Etoile, Avenue Albert Ramboz, 69190 SAINT-FONS

Country

France

View All Listings by this Company

'DF1212'. White coloured, extruded PTFE tape. For use with water up to 85°C.

Section:

5294 Polytetrafluoroethylene (PTFE)

Section Subtitle:

Components.

WRAS Approval Number:

2212578

Expiry date:

31/12/2027

Approval Holder:

Yuhuan Xiangrong Misheng Sealing Parts Co., Ltd.

Company Name

Yuhuan Xiangrong Misheng Sealing Parts Co., Ltd.

Address

Qinggang industrial Zone, Yuhuan, Zhejiang

Country

China

View All Listings by this Company

'SPIT EPCON C8+ XTREM'. Site applied, brick coloured (once mixed), chemical anchor resin supplied in a pre-weighed dual cartridge. Apply as per manufacturer's instructions dated 'NOV. 25'. Cure for 24 hours@21°C. For use with water up to 23°C. For use only as a resin anchor having been tested at a reduced surface area to volume ratio of 1,000mm² per 1 litre of water. This material is only approved for the curing conditions that appear on the approval. If the cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:

5311 Resin Anchors

Expiry date:

31/10/2030

Approval Holder:

ITW Construction Europe

Company Name

ITW Construction Europe

Address

150 Avenue de Lyon BP 104, 26501 Bourg-Les-Valence

Country

France

View All Listings by this Company

'KE-551E-U, KE-561E-U, KE-571E-U & KE-581E-U, natural'. Natural (appears white, translucent), extruded VMQ silicone rubber cylinders. Shore hardnesses 50, 60, 70 & 80 A respectively. Tested in-radius sizes between 0.9mm and 21.13mm. For use with water up to 85°C.

Section:

5410 Rubbers

Section Subtitle:

Silicone - components.

WRAS Approval Number:

251155029

Expiry date:

30/11/2030

Approval Holder:

Shin-Etsu Silicones Europe B.V.

Company Name

Shin-Etsu Silicones Europe B.V.

Address

Kasteler Straße 45, 65203 Wiesbaden

Country

Germany

View All Listings by this Company