Range of spout outlets incorporating stainless steel bodies (various finishes) and a plastic aerator. Maximum operating temperature 60°C.

Section:

0682 Combination Tap Assemblies

Section Subtitle:

Spout outlet(s).

WRAS Approval Number:

2110305

Note:

Open outlet use only.

Size:

½” BSP (M)

Marking:

QTOO (brand of D Line) on rosette.

Installation Requirements:

R001 R040

Expiry date:

31/10/2026

Model:

QA3080xxx Spout 115mm, rose 80mm, 45 degree. QA3090xxx Spout 115mm, rose 90mm, 45 degree. QA3180xxx Spout 190mm, rose 80mm. QA3190xxx Spout 190mm, rose 90mm. QA3280xxx Spout 250mm, rose 80mm. QA3290xxx Spout 250mm, rose 90mm. QA3380xxx Spout 191mm, rose 80mm, 45 degree. QA3390xxx Spout 191mm, rose 90mm, 45 degree. Where xxx denotes the surface finish (which is a non-water contact part). It can be 1 to 3 digits, which can be any combination of numbers and/or letters, as examples: M = brushed stainless steel finish, PP1 = polished PVD gunmetal finish.

Product Images

Approval Holder:

D Line

Company Name

D Line

Address

Jylingevej 59, kld Copenhagen

Postcode

2720

Country

Denmark

Phone

+4572170138

General Email

rik@dline.com

View All Listings by this Company

‘Quattroselect’ range of chemical dosing units incorporating a lockable self-closing trigger assembly and a self-closing bottle filler assembly which control the flow. The products are supplied with an approved double check valve assembly at the inlet (suitable for backflow prevention against fluid category 3). Maximum working pressure 5.8 bar. Cold water use only.

Section:

0970 Dosing Equipment

Section Subtitle:

Fittings in this section have been judged only against the requirements of The Water Supply (Water Fittings) Regulations 1999 (England and Wales), The Water Supply (Water Fittings) (Scotland) Byelaws 2014 or The Water Supply (Water Fittings) Regulations (Northern Ireland) 2009. The decision of the Scheme to list them is not to be taken as any guide as to their effectiveness to do the job for which they have been designed

WRAS Approval Number:

2110700

Size:

¾” BSP (M)

Marking:

Quattroselect on hose trigger. Diversey on label on door panel. Quattroselect on front panel. Other product info inside door panel.

Installation Requirements:

R001 R160 R040

Expiry date:

31/10/2026

Proviso:

Not suitable for use with chemicals greater than a fluid category 3 risk.

Model:

1219424 – QuattroSelect Pouch air gap CW 1219425 – QuattroSelect Pouch safe gap CW 1211418 – QuattroSelect Pouch air gap

Approval Holder:

Diversey Europe Operations BV.

Company Name

Diversey Europe Operations BV.

Address

De Boelelaan 32, 1083 HJ Amsterdam, Netherlands

View All Listings by this Company

‘Numepress’ range of stainless-steel crimp fittings incorporating EPDM and ‘O’-rings. For use with stainless steel tube. Maximum working pressure 16.0 bar. Maximum operating temperature 95°C.

Section:

1100 Fittings and Pipe - Compatible Systems

Section Subtitle:

Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2011045

Size:

15, 18, 22, 28, 35, 42, 54, 76, 88, 108, 114, 139, 168mm. ½”, ¾”, 1”, 1 ¼”, 1 ½”, 2” BSP (M or F). DN50 to DN150 Flanged.

Marking:

Numepress, logo & size on body

Installation Requirements:

R001

Expiry date:

30/11/2025

Model:

F1 Coupling from 15 to 168.3 F2 Slip Coupling from 15 to 168.3 F3 90Q Female-Female Elbow from 15 to 168.3 F4 90Q Male - Female Elbow from 15 to 168.3 F5 45Q Female-Female Elbow from 15 to 168.3 F6 45Q Female - Male Elbow from 15 to 168.3 F7 Female Angle Adapter from 15 1/2" to 54 2" F8 Male Angle Adapter from 15 1/2" to 54 2" F9 Female Elbow with Wallnut from 15 1/2" to 22 3/4" Fl0 90Q Elbow with Plane Ends from 15 to 54 F11 Valve connector with swivel in stainless Steel from 15 1/2" to 76.121/2" F12 Female tee threaded adaptor from 15 1/2" to 108 2" F14 Reducer from 18-15 to 168.3-139.7 F15 Reducing tee from 18-15 to 168.3-139.7 F16 Equal Tee from 15 to 168.3 F17 Female adaptor from 15 3/ 8" to 88.9 3" F18 M ale adaptor from 15 3/8" to 108 4" F19 Flanges adaptor from 15 DN15 to 108 DNlO0 F20 Pre-formed pipe bridge from 15 to 28 F21 Plug from 15 to 108 F22 Air tuve Pipe Bridge from 15 to 28 F23 Pipe Bridge from 15 to 28 F24 3 Pieces adaptor from 15 to 60.3 F25 Female -Female pipe bridge from 15 to 28 F26 Female connector from 15 1/2" to 54 2" F27 Male connector from 15 1/2" to 54 2" F28 Press flanged adaptor from 54 DN50 to 168.3 DN150 F30 Cross or reduced cross from 15-15-15-15 to 168.3-168.3-168.3-168 .3 F33 45Q Male angle adaptor from 15 1/ 2" to 28 1" F34 90Q Female angle adaptor 15 3/ 8" to 35 1 1/ 4" F35 90Q Female angle adaptor with swivel nut from 15 1/2" to 54 2" F36 Male Tee threaded adaptor from 15 3/8" to 35 11/4" F37 Male threaded cross from 15 1/2" to 108-4" F38 Female threaded cross from 15 1/ 2" to 108 4" F39 90Q Male angle adaptor from 15 3/8" to 54 2" F41 Male union connector gas from 15 1/ 2" to 54 2" F42 Female Union connector gas from 15 1/2" to 54 2" F43 Grooved Transition from 3/4" to 2" F44 Van Stone flange from 1/2" to 2" F45 Union Gas Female threaded from 15 3/4" to 54 2" F46 Straight union with press fitting on both ends from 15 to 54 F47 Half coupling from 15 to 168.3 F48 30Q Female-Female elbow from 15 to 108 F49 30Q Elbow with plain ends from 15 to 54 F50 15Q Female-female elbow from 15 to 108 F51 60Q Female-female elbow from 15 to 108 F52 Flanges adaptor PN6 from 15 DN15 to 108 DN100 F53 Pipe penetration from 15 to 108 F54 Male plug from 16 to 168.3 F55 Weld Adaptor from 15 to 60.3 F56 75Q Female -Female elbow from 15 to 108 F57 l0Q Female-Female elbow from 15 to 108 F58 60Q Elbow with plain ends from 15 to 54 F59 lSQ Elbow with plain ends from 15 to 54 F60 Slip coupling with female thread from DN15 1/ 2" to DN54 F61 Transition for grooved coupling from DN28x33.7 to DN108x 11 4.3 F63 7SQ Elbow with plain ends from 15 to 54 F64 15Q Male -female elbow from 15 to 108 F65 Male-Female pipe penetration from 15 to 108 F66 30Q Male-female elbow from 15 to 108 F72 45Q Elbow with plain ends from 15 to 54 Pipe 15 x 0.6 mm Material 1.4401/1.4404 Pipe 18 x 0.7 mm Material 1.4401/1.4404 Pipe 22 x 0.7 mm Material 1.4401/1.4404 Pipe 28 x 0.8 mm Material 1.4401/1.4404 Pipe 35 x 1 mm Material 1.4401/1.4404 Pipe 42 x 1.1 mm Material 1.4401/1.4404 Pipe 54 x 1.2 mm Material 1.4401/1.4404 Pipe 76.1 x 1.5 mm Material 1.4 401/ 1.4404 Pipe 15 x 1 mm Material 1.4401/1.4404 Pipe 18 x 1 mm Material 1.4401/1.4404 Pipe 22 x 1.2 mm Material 1.4401/1.4404 Pipe 28 x 1.2 mm Material 1.4401/1.4404 Pipe 35 x 1.5 mm Material 1.4401/1.4404 Pipe 42 x 1.5 mm Material 1.4401/1.4404 Pipe 54 x 1.5 mm Material 1.4401/1.4404 Pipe 76.1 x 2 mm Material 1.4401/1.4404 Pipe 88.9 x 2 mm Material 1.4401/1.4404 Pipe 114.3 x 2 mm Material 1.4401/1.4404 Pipe 139.7 x 2 mm Material 1.4401/1.4404 Pipe 139.7 x 2.6 mm Material 1.4401/1.4404 Pipe 168.3 x 2 mm Material 1.4401/1.4404 Pipe 168.3 x 2.6 mm Material 1.4401/1.4404 Pipe 15 x 0.6 mm Material 1.4301/1.4307 Pipe 18 x 0.7 mm Material 1.4301/1.4307 Pipe 22 x 0.7 mm Material 1.4301/1.4307 Pipe 28 x 0.8 mm Material 1.4301/1.4307 Pipe 35 x 1 mm Material 1.4301/1.4307 Pipe 42 x 1.1 mm Material 1.4301/1.4307 Pipe 54 x 1 .2 mm rv,Material 1.4301/1.4307 Pipe 76.1 x 1.5 mm Material 1.4301/1.4307 Pipe 15 x 1 mm Material 1.4301/1.4307 Pipe 18 x 1 mm Material 1.4301/1.4307 Pipe 22 x 1. 2 mm Material 1.4301/1.4307 Pipe 28 x 1.2 mm Material 1.4301/1.4307 Pipe 35 x 1.5 mm Material 1.4301/1.4307 Pipe 42 x 1.5 mm Material 1.4301/1.4307 Pipe 54 x 1.5 mm Material 1.4301/1.4307 Pipe 76.1 x 2 mm Material 1.4301/1.4307 Pipe 88.9 x 2 mm Material 1.4301/1.4307 Pipe 108 x 2 mm Material 1.4301/1.4307 Pipe 114.3 x 2 mm Material 1.4301/1.4307 Pipe 139.7 x 2 mm Material 1.4301/1.4307 Pipe 139.7 x 2.6 mm Material 1.4301/1 .4307 Pipe 168.3 x 2 mm Material 1.4301/1.4307 Pipe 168.3 x 2.6 mm Material 1.4301/1.4307

Product Images

Approval Holder:

ISOTUBI SL

Company Name

ISOTUBI SL

Address

Pol. Ind. Santa Rita c/ Mecànica 6 08755 Castellbisbal ( Bcn ) SPAIN

Country

Spain

General Email

xavi.armengou@isotubi.com

View All Listings by this Company

Uponor S-Press (black and grey) composite fittings, Uponor S-Press composite PPSU reducers with S-Press PLUS composite PPSU nipples, Uponor RS fittings & Uponor S Press Metal Press fittings for use with for use with Uponor MLC pipe. Maximum working pressure and operating temperature: 10.0 bar@70°C Maximum working pressure and operating temperature: 16.0 bar @ Cold water use only.

Section:

1100 Fittings and Pipe - Compatible Systems

Section Subtitle:

Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2101908

Size:

Uponor MLC Pipe (40 – 110mm) Uponor S-Press composite PPSU fittings (40 – 75mm) Uponor S-Press composite PPSU reducers with S-Press PLUS composite PPSU nipples 20, 25, 32mm Uponor RS Fittings (63 – 110mm) Uponor S-Press Metal Press fittings (40 -75mm)

Marking:

Uponor or U on fitting. Uponor MLCP and product info on pipe.

Installation Requirements:

R001

Expiry date:

31/01/2026

Model:

S-Press composite fittings PPSU 1046401 Uponor S-Press composite coupling PPSU 40-40 1046402 Uponor S-Press composite coupling PPSU 50-50 1032881 Uponor S-Press composite coupling PPSU 63-63 1032882 Uponor S-Press composite coupling PPSU 75-75 1046406 Uponor S-Press composite reducer PPSU 50-40 1032883 Uponor S-Press composite reducer PPSU 63-40 1032884 Uponor S-Press composite reducer PPSU 63-50 1032885 Uponor S-Press composite reducer PPSU 75-50 1032886 Uponor S-Press composite reducer PPSU 75-63 1046386 Uponor S-Press composite elbow PPSU 40-40 1046387 Uponor S-Press composite elbow PPSU 50-50 1032877 Uponor S-Press composite elbow PPSU 63-63 1032878 Uponor S-Press composite elbow PPSU 75-75 1046388 Uponor S-Press composite elbow 45° PPSU 40-40 1046389 Uponor S-Press composite elbow 45° PPSU 50-50 1032879 Uponor S-Press composite elbow 45° PPSU 63-63 1032880 Uponor S-Press composite elbow 45° PPSU 75-75 1046390 Uponor S-Press composite tee PPSU 40-40-40 1046391 Uponor S-Press composite tee PPSU 50-50-50 1032887 Uponor S-Press composite tee PPSU 63-63-63 1032888 Uponor S-Press composite tee PPSU 75-75-75 1046400 Uponor S-Press composite tee reducer PPSU 50-40-50 1032891 Uponor S-Press composite tee reducer PPSU 63-40-63 1032893 Uponor S-Press composite tee reducer PPSU 75-40-75 1032894 Uponor S-Press composite tee reducer PPSU 75-50-75 S-Press composite fittings PPSU (40, 50, 63 and 75 mm) with reducers design (nipples) of S-Press PLUS PPSU composite fittings 20, 25 and 32 mm 1039941 Uponor S-Press reducer PPSU 40-25 1039942 Uponor S-Press reducer PPSU 40-32 1039943 Uponor S-Press reducer PPSU 50-32 1039962 Uponor S-Press tee red. PPSU 40-20-40 1039963 Uponor S-Press tee red. PPSU 40-25-32 1039964 Uponor S-Press tee red. PPSU 40-25-40 1039965 Uponor S-Press tee red. PPSU 40-32-32 1039966 Uponor S-Press tee red. PPSU 40-32-40 1039967 Uponor S-Press tee red. PPSU 50-25-40 1039968 Uponor S-Press tee red. PPSU 50-25-50 1039969 Uponor S-Press tee red. PPSU 50-32-50 1032889 Uponor S-Press composite tee reducer PPSU 63-25-63 1032890 Uponor S-Press composite tee reducer PPSU 63-32-63 1032892 Uponor S-Press composite tee reducer PPSU 75-32-75 Uponor RS adapters (40-110 mm) and Uponor RS adapters (16, 20, 25, 32) 1029138 Uponor RS elbow RS2-RS2 1029139 Uponor RS elbow RS3-RS3 1029140 Uponor RS elbow 45° RS2-RS2 1029141 Uponor RS elbow 45° RS3-RS3 1029142 Uponor RS tee RS2-RS2-RS2 1029143 Uponor RS tee RS3-RS3-RS3 1059397 Uponor RS adapter S-Press 16-RS2 1095818 Uponor RS adapter S-Press PLUS 20-RS2 1095819 Uponor RS adapter S-Press PLUS 25-RS2 1095820 Uponor RS adapter S-Press PLUS 32-RS2 1046940 Uponor RS adapter S-Press 40-RS2 1046941 Uponor RS adapter S-Press 50-RS2 1029125 Uponor RS adapter S-Press 63-RS2 1029126 Uponor RS adapter S-Press 75-RS2 1029127 Uponor RS adapter S-Press 90-RS3 1029128 Uponor RS adapter S-Press 110-RS3 1059403 Uponor RS adapter female thread Rp1/2"FT-RS2 1059404 Uponor RS adapter female thread Rp1/2"FT-RS3 1029134 Uponor RS adapter female thread Rp1"FT-RS2 1029136 Uponor RS adapter female thread Rp2 1/2"FT-RS2 1029135 Uponor RS adapter female thread Rp2"FT-RS2 1029137 Uponor RS adapter female thread Rp3"FT-RS3 1059402 Uponor RS adapter male thread R1 1/2"MT-RS2 1029132 Uponor RS adapter male thread R2 1/2"MT-RS2 1029131 Uponor RS adapter male thread R2"MT-RS2 1029133 Uponor RS adapter male thread R3"MT-RS3 1029144 Uponor RS coupling RS2-RS2 1029145 Uponor RS coupling RS3-RS3 1029146 Uponor RS reducer RS3-RS2 1059399 Uponor RS flange adapter RS2-DN65 (PN16) 1029130 Uponor RS flange adapter RS3-DN100 (PN16) 1029129 Uponor RS flange adapter RS3-DN80 (PN16) 1046477 Uponor RS spacer RS2-RS2 l=130mm 1046750 Uponor RS spacer RS2-RS2 l=5mm 1046478 Uponor RS spacer RS3-RS3 l=210mm 1046751 Uponor RS spacer RS3-RS3 l=5mm Uponor S-Press fitting 40, 50, 63, 75 mm 1046932 Uponor S-Press coupling 40-40 1046935 Uponor S-Press coupling 50-50 1046934 Uponor S-Press reducer 50-40 1046908 Uponor S-Press elbow 40-40 1046911 Uponor S-Press elbow 50-50 1046913 Uponor S-Press elbow 45° 40-40 1046914 Uponor S-Press elbow 45° 50-50 1046921 Uponor S-Press tee 40-40-40 1046928 Uponor S-Press tee 50-50-50 1046904 Uponor S-Press adapter female thread 40-Rp1 1/2"FT 1046903 Uponor S-Press adapter female thread 40-Rp1 1/4"FT 1046907 Uponor S-Press adapter female thread 50-Rp1 1/2"FT 1046901 Uponor S-Press adapter male thread 40-R1 1/4"MT 1046902 Uponor S-Press adapter male thread 40-R1 1/2"MT 1046905 Uponor S-Press adapter male thread 50-R1 1/2"MT 1046906 Uponor S-Press adapter male thread 50-R2"MT 1032895 Uponor S-Press adapter male thread 63-R2"MT 1032896 Uponor S-Press adapter male thread 75-R2 1/2"MT 1046937 Uponor S-Press adapter swivel nut 40-G1 1/2"SN 1060094 Uponor S-Press adapter swivel nut 40-G1 1/4"SN 1060095 Uponor S-Press adapter swivel nut 50-G1 1/2"SN 1046938 Uponor S-Press adapter swivel nut 50-G1 3/4"SN 1046939 Uponor S-Press adapter swivel nut 50-G2"SN 1046910 Uponor S-Press elbow adap. female thread 40-Rp1 1/2"FT 1046912 Uponor S-Press elbow adap. female thread 50-Rp1 1/2"FT 1046909 Uponor S-Press elbow adapter male thread 40-R1 1/4"MT 1046922 Uponor S-Press tee adapter female thread 40-Rp1/2"FT-40 1046923 Uponor S-Press tee adapter female thread 40-Rp3/4"FT-40 1046929 Uponor S-Press tee adapter female thread 50-Rp1"FT-50

Product Images

Approval Holder:

Uponor GmbH

Company Name

Uponor GmbH

Address

Industriestrasse 56, Hassfurt

Postcode

97437,

Country

Germany

Phone

0034916853600

General Email

mariaisabel.fernandez@uponor.com

View All Listings by this Company

Manufacturer:

Uponor GmbH

Company Name

Uponor GmbH

Address

Industriestrasse 56, Hassfurt

Postcode

97437,

Country

Germany

Phone

0034916853600

General Email

mariaisabel.fernandez@uponor.com

View All Listings by this Company

Range of Eco Duo copper press fittings with EPDM ‘O’-rings for use with Eco-Duo copper tube. The joints are achieved by means of a crimping tool. For above ground use only. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

1100 Fittings and Pipe - Compatible Systems

Section Subtitle:

Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2010342

Size:

See model

Marking:

Water-Kinetic logo and QR on pipework and fitting sleeve.

Installation Requirements:

R001

Expiry date:

31/10/2025

Model:

Eco-Duo Copper Pipe Outer: W1501CP 15mm - 3m length W1502CP 22mm - 3m length W1503CP 28mm - 3m length W1504CP 35mm - 3m length W1505CP 42mm – 3m length W1506CP 54mm – 3m length W1507CP 66.7mm – 3m length W1508CP 76.1mm – 3m length Eco-Duo 90 Degree Elbow: W1509CP for 15mm W1510CP for 22mm W1511CP for 28mm W1512CP for 35mm W1513CP for 42mm W1514CP for 54mm W1515CP for 66.7mm W1516CP for 76.1mm Eco-Duo 90 Degree Street Elbow: W1517CP for 15mm W1518CP for 22mm W1519CP for 28mm W1520CP for 35mm W1521CP for 42mm W1522CP for 54mm Eco-Duo Equal Tee: W1541CP for 15mm W1542CP for 22mm W1543CP for 28mm W1544CP for 35mm W1545CP for 42mm W1546CP for 54mm W1547CP for 66.7mm W1548CP for 76.1mm Eco-Duo Coupling Reducer: W1549CP for 22mm x 15mm W1550CP for 28mm x 22mm W1649CP for 28mm x 15mm W1650CP for 35mm x 28mm W1651CP for 42mm x 35mm W1652CP for 54mm x 42mm Eco-Duo Coupler Street Reducer: W1551CP for 28mm x 15mm W1552CP for 35mm x 22mm W1553CP for 35mm x 28mm W1554CP for 42mm x 22mm W1555CP for 42mm x 28mm W1556CP for 42mm x 35mm W1557CP for 54mm x 35mm W1558CP for 54mm x 42mm W1559CP for 66.7mm x 28mm W1560CP for 66.7mm x 35mm W1561CP for 66.7mm x 42mm W1562CP for 66.7mm x 54mm W1563CP for 76.1mm x 35mm W1564CP for 76.1mm x 42mm W1565CP for 76.1mm x 54mm W1566CP for 76.1mm x 66.7mm Eco-Duo Straight Coupling: W1567CP for 15mm W1568CP for 22mm W1569CP for 28mm W1570CP for 35mm W1571CP for 42mm W1572CP for 54mm W1573CP for 66.7mm W1574CP for 76.1mm Eco-Duo Copper Press Slip Coupler: W1584CP For 15mm W1585CP for 22mm W1586CP for 28mm W1587CP for 35mm W1588CP for 42mm W1589CP for 54mm W1590CP for 66.7mm W1591CP for 76.1mm Eco-Duo Tee Reduced Branch: W1594CP for 108x108x54 W1595CP for 108x108x66.7mm W1596CP for 108x108x76.1mm W1635CP for 22x22x15mm W1636CP for 28x28x15mm W1637CP 28x28x22mm W1638CP 35x35x15mm W1639CP 35x35x22mm W1640CP 35x35x28mm W1641CP for 42x42x15mm W1642CP for 42x42x22mm W1643CP for 42x42x28mm W1645CP for 54x54x22mm W1646CP for 54x54x28mm W1647CP for 54x54x35mm W1648CP for 54x54x42mm Eco-Duo Confluence Tee: W1575CP for 22mm W1576CP for 28mm W1577CP for 35mm W1578CP for 42mm W1579CP for 54mm W1580CP for 66.7mm W1581CP for 76.1mm

Product Images

Approval Holder:

Water-Kinetics

Company Name

Water-Kinetics

Address

Lomond House 7 Greenbank Road Darvel

Postcode

KA17 0NN

View All Listings by this Company

Manufacturer:

Water-Kinetics

Company Name

Water-Kinetics

Address

Lomond House 7 Greenbank Road Darvel

Postcode

KA17 0NN

View All Listings by this Company