Directory Search Results

Fittings Materials
Print List

#2306574

'PIMTAS PLASTIK PE 100 Pipes'. Extruded, PE100 pipes available in black and blue colours. For use with water up to 85°C.

Section:
5240 Polyethylene
Section Subtitle:
Components. All components listed in this section have been tested for water contact suitability of material only.
WRAS Approval Number:
2306574
Expiry date:
30/06/2028
Approval Holder:
Pimtas Plastik Insaat Malz. San. Ve Tic A.S.
Company Name
Pimtas Plastik Insaat Malz. San. Ve Tic A.S.
Address
Pelitli Neighborhood 4443, Street No: 5, 41400 Gebze, Kocaeli
Country
Turkey

View All Listings by this Company

Print This Approval

#2311565

'SCGC HDPE H1000PC'. Black coloured, extruded polyethylene material. For use with water up to 85°C.

Section:
5245 Polyethylene
Section Subtitle:
Material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2311565
Expiry date:
30/11/2028
Approval Holder:
Thai polyethylene Co., Ltd.
Company Name
Thai polyethylene Co., Ltd.
Address
10 I-1 Road, Map Ta Phut Industrial Estate, 21150 Maung, Rayong
Country
Thailand

View All Listings by this Company

Print This Approval

#2205578

‘METOLUX Metoset’. Site applied, grey coloured chemical anchor resin which is supplied in a pre-mixed cartridge. Apply as per manufacturer’s instructions 'version 2', dated 29.10.2023. Cure for 4 days@7°C. For use with water up to 23°C. This material is only approved for the curing conditions that appear on the approval. If the cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:
5311 Resin Anchors
Expiry date:
31/05/2027
Approval Holder:
Chemfix Products Ltd.
Company Name
Chemfix Products Ltd.
Address
Mill Street East, Dewsbury, West Yorkshire
Postcode
WF12 9BQ
Phone
+44(0)1924 453886

View All Listings by this Company

Print This Approval

#2312526

'WRWNR75D - HT'. Black coloured, natural rubber material manufactured by calendaring and moulding. Shore hardness 75 Shore D. Tested in-radius size 1.25mm. For use with water up to 50°C.

Section:
5320 Rubbers
Section Subtitle:
General - material only. Components made from materials listed in this section may be required to be submitted for audit.
WRAS Approval Number:
2312526
Expiry date:
31/12/2028
Approval Holder:
Western Rubber Works PVT. Ltd.
Company Name
Western Rubber Works PVT. Ltd.
Address
Plot No. R-73 & R-74, Rabale Midc Thane Belapur Road Navi Mumbai, Maharashtra, PIN: 400701
Country
India

View All Listings by this Company

Print This Approval

#2312537

'WRAS 61713 EB 78'. Black coloured, hard ebonite rubber material manufactured by calendaring and autoclave vulcanisation. Shore hardness 78D. Tested in-radius size 1.05mm. For use with water up to 60°C.

Section:
5320 Rubbers
Section Subtitle:
General - material only. Components made from materials listed in this section may be required to be submitted for audit.
WRAS Approval Number:
2312537
Expiry date:
31/12/2028
Approval Holder:
Arul Polymers Pvt Ltd.
Company Name
Arul Polymers Pvt Ltd.
Address
A-6C, SIDCO industrial Estate, Hosur-635126. Krishnagiri ( District). TamilNadu.
Country
India
General Email
development@arulrubbers.com

View All Listings by this Company

Print This Approval

#240155009

'WRAS 61813 E80'. Black coloured, hard ebonite rubber material manufactured by calendaring and autoclave vulcanisation. Shore hardness 80. Tested in-radius size 2.2mm. For use with water up to 60°C.

Section:
5320 Rubbers
Section Subtitle:
General - material only. Components made from materials listed in this section may be required to be submitted for audit.
WRAS Approval Number:
240155009
Expiry date:
31/01/2029
Approval Holder:
Arul Polymers Pvt Ltd.
Company Name
Arul Polymers Pvt Ltd.
Address
A-6C, SIDCO industrial Estate, Hosur-635126. Krishnagiri ( District). TamilNadu.
Country
India
General Email
development@arulrubbers.com

View All Listings by this Company

Print This Approval

#2312553

'60EP126p'. Black coloured, compression moulded EPDM 'O' rings. Shore hardness 60. Tested in-radius size 0.6mm. For use with water up to 85°C.

Section:
5360 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - components.
WRAS Approval Number:
2312553
Expiry date:
31/12/2028
Approval Holder:
Bode GmbH
Company Name
Bode GmbH
Address
Kirchweg 114, 24558 Henstedt-Ulzburg
Country
Germany
Phone
Tel: +49 4193 9821234 Fax: +49 4193 9822244

View All Listings by this Company

Print This Approval

#240755001

'EP02971PWRC'. Black coloured, compression moulded EPDM material. Shore hardness 72. Tested in-radius size 1.0mm. For use with water up to 85°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
240755001
Expiry date:
31/07/2029
Approval Holder:
Chang Horing Rubber Co., Ltd.
Company Name
Chang Horing Rubber Co., Ltd.
Address
No 38 Lu-Gong South 3 Road, Lu-Kang Town, Changhua Hsien
Country
Taiwan
Phone
+886 4 7810868

View All Listings by this Company

Print This Approval

#2312536

'SME001 EPDM'. Black coloured, compression moulded EPDM material. Shore hardness 60. In November 2024 'SME001 EPDM', a compression moulded EPDM rubber with a shore hardness of 75 was added to the approval so that a range with a hardness between 60 & 75 is covered by the approval. Tested in-radius size of 1.0mm and are for use with water up to 65°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2312536
Expiry date:
31/12/2028
Approval Holder:
SRI RAMKARTHIC POLYMERS PVT LTD
Company Name
SRI RAMKARTHIC POLYMERS PVT LTD
Address
D.NO 2/1 - 1&2 SF NO 237/1B&2A Thudiyalur Road, Kottaipalayam, Coimbatore, TA 641110
Country
India

View All Listings by this Company

Print This Approval

#240550005

'E59WKZ'. Black coloured, injection moulded EPDM rubber material. Shore hardness 58. Tested in-radius 1.0mm. For use with water up to 60°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
240550005
Expiry date:
31/05/2029
Approval Holder:
Duram Industries A.C. Ltd.
Company Name
Duram Industries A.C. Ltd.
Address
Kibbuts Ramat, Hakovesh, 44930
Country
Israel

View All Listings by this Company

Print This Approval


Show Per Page
5102050Show All

Back To Directory Sections

Page 599 of 1011

© WRAS 2025 | Update Cookie Consent

Site Developed By Duo

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.