'Endoprene 888.55'. Factory applied, two-component, beige coloured polyurethane coating. Mix and apply as per manufacturer's Data Sheet 'Doc. 089' dated '01/07/2011'. Cure for 8 days@20°C. For use with water up to 23°C. This material is only approved for the curing conditions that appear on the approval. If the cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:

5030 Coatings, Paints & Linings

Section Subtitle:

Factory applied pipe & fittings coatings.

WRAS Approval Number:

2206539

Expiry date:

30/06/2027

Approval Holder:

BS Coatings

Company Name

BS Coatings

Address

Allee Paul Sabatier, BP 88, 27940 Aubevoye

Country

France

Phone

+ 33 32773077

View All Listings by this Company

‘Belzona 1341 available in Blue & Grey’. Site applied, two-component epoxy coatings consisting of a base and solidifier. Mix and apply as per manufacturer’s instructions for use ‘FN10139’, publication no. ’07-03-19’. Cure coat 1 for 4 hours at a temperature of between 10°C and 30°C. Cure coat 2 as per in accordance with ‘full mechanical loading or water in manufacturer’s instructions for use ‘FN10139’, publication no. ’07-03-19’. For use with water up to 23°C. This material is only approved for the curing conditions that appear on the approval. If the cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:

5042 Coatings, Paints & Linings

Section Subtitle:

Site applied pipe and fittings coatings. Compliance with BS6920 relates to the conditions of cure specified in the listing. If the cure conditions are varied from those described below then compliance with BS6920 cannot be assummed without further testing. Where catalysts are required, only tested catalysts in the recommended concentrations should be used. Manufacturer's advice must be sought if any non standard mixing or curing conditions are being considered.

WRAS Approval Number:

2301504

Expiry date:

31/01/2028

Approval Holder:

Belzona Limited

Company Name

Belzona Limited

Address

Claro Road, Harrogate, Yorks.

Postcode

HG1 4AY

Phone

+44 1423 567641 Fax: 01423 505967

View All Listings by this Company

'BÜFA®-ISO-Gelcoat 3000-H 572-9735 & Synolite 5410-P-4'. Grey coloured, unsaturated polyester gelcoat with a hand-laid unsaturated polyester resin and fibreglass laminate. Apply and cure in accordance with manufacturer's user guides 'Q-035, issue 1' & 'BUKUG 1001, issue 1' dated 19/08/2020. For use with water up to 23°C.

Section:

5125 Glass Reinforced Plastics (GRP)

Section Subtitle:

Material only. Components made from materials listed in this section may be required to be submitted for audit tests.

WRAS Approval Number:

2111542

Expiry date:

30/11/2026

Approval Holder:

BÜFA Composite Systems GmbH & Co. KG

Company Name

BÜFA Composite Systems GmbH & Co. KG

Address

Hohe Looge 2-8, 26180 Rastede

Country

Germany

View All Listings by this Company

`TUB05`. Extruded, dual layered hose consisting of a clear PE liner and black coloured EPDM outer layer. Shore hardness 85. For use with water up to 85°C.

Section:

5140 Hoses & Tubing

Expiry date:

31/08/2026

Approval Holder:

Industrial Disflex Iberica, SL

Company Name

Industrial Disflex Iberica, SL

Address

Carrer Comerç, 4, Pol. Ind. Comte de Sert, 08755 – Castellbisbal, Barcelona

Country

Spain

View All Listings by this Company

'OP-90601' (orange coloured) & 'IP-90604' (light orange coloured). Injection moulded polyester materials. For use with water up to 50°C.

Section:

5217 Polyester

Section Subtitle:

Material only. Components made from materials listed in this section may be required to be submitted for audit tests.

WRAS Approval Number:

2210511

Expiry date:

31/10/2027

Approval Holder:

Hitech Industries FZCO

Company Name

Hitech Industries FZCO

Address

Jebel Ali Free Zone, Near Roundabout 10, PO Box 16819

Country

Dubai

View All Listings by this Company