Directory Search Results

Print List

#240502011

Three hole, single outlet (swivel) combination tap assembly (brass body - various finishes), incorporating quarter turn ceramic disc headworks with dome type operating members. The spout outlets incorporate a plastic aerator. The product is supplied with stainless steel braided PEX lined flexible hose assemblies, for use between the valves and spout. Also supplied with a lever type pop up waste. Maximum working pressure 10.0 Bar. Maximum operating temperature 60.0°C.

Section:
0660 Combination Tap Assemblies
Section Subtitle:
Three hole tap(s) with a single outlet and a swivel spout.
WRAS Approval Number:
240502011
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Note:
No testing performed on pop up waste.
Size:
1/2" BSP (M).
Marking:
GROHE SPA on body
Installation Requirements:
R001 R006 R009 R010
Expiry date:
31/05/2029
Model:
20.595.xxx. Where xxx denotes finish, can be replaced by: 000 – Chrome DC0 – Supersteel DA0 – Warm sunset AL0 – Brushed hard graphite A00 – hard graphit BE0 – polished nickel DL0 – brushed warm sunset EN0 – brushed nickel GN0 – brushed cool sunrise GL0 – cool sunrise
Product Images

Approval Holder:
Grohe AG
Company Name
Grohe AG
Address
Industriepark Edelburg Hemer
Postcode
58675
Country
Germany
Phone
02372 930
General Email
marc.engelhardt@lixil.com

View All Listings by this Company

Print This Approval


#240502060

Range of wall mounted concealed four-hole, single outlet (fixed) combination tap assemblies (brass body with chrome plated or matt black finish trim set), incorporating a ceramic cartridge headwork with a single lever operating member and a self-cancelling diverter to shower outlet. The spout inlet has a compression connection for use with copper pipe (manufactured to EN 1057) and incorporates a plastic aerator on the outlet. The product is supplied with a wall mounted shower outlet elbow with integral handset holder, shower hose and a shower handset. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
0680 Combination Tap Assemblies
Section Subtitle:
Multi hole tap(s) with a single outlet and a swivel spout , incorporating a self-cancelling diverter to a shower outlet with a Type HC backflow protection device (verified by test - suitable for backflow protection against Fluid Category 3).
WRAS Approval Number:
240502060
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
½" BSP (F).
Marking:
LOTA logo on body.
Installation Requirements:
R001 R030
Expiry date:
31/05/2029
Model:
63059-5001 (Chrome). 63059-516801 (Matt black finish).
Product Images

Approval Holder:
Xiamen lota international co. ltd
Company Name
Xiamen lota international co. ltd
Address
No. 61 Xing Nan Road Jimei District Xiamen
Postcode
361022
Country
China
General Email
liwenjuan@lota.com.cn

View All Listings by this Company
Manufacturer:
Xiamen lota international co. ltd
Company Name
Xiamen lota international co. ltd
Address
No. 61 Xing Nan Road Jimei District Xiamen
Postcode
361022
Country
China
General Email
liwenjuan@lota.com.cn

View All Listings by this Company

Print This Approval


#240502046

Wall mounted spout with a brass body (various finishes) and a brass rough kit incorporating a stainless-steel strainer and a plastic flow regulator on the inlet of the spout. Open outlet use only. Maximum operating temperature: 60.0°C (10 942 xx0) and 80.0°C (10 941 180)

Section:
0682 Combination Tap Assemblies
Section Subtitle:
Spout outlet(s).
WRAS Approval Number:
240502046
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
¾” BSP (M) (10 942 xx0) and ¾” BSP (F) (10 941 180)
Marking:
AXOR on body.
Installation Requirements:
R001 R040
Expiry date:
31/05/2029
Model:
10 942 xx0 (Spout) 10 941 180 (Rough Kit) Where xx0 denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
Product Images

Approval Holder:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Country
Germany
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company
Manufacturer:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Country
Germany
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Print This Approval


#240408005

Range of stainless-steel braided convoluted hose assemblies and expansion joints with either threaded or flanged end connections. Maximum working pressure: 16bar. Maximum operating temperature: 90oC.

Section:
0870 Tubes
Section Subtitle:
Stainless Steel.
WRAS Approval Number:
240408005
Size:
See models.
Marking:
Manufacturers logo and model on adhesive label.
Installation Requirements:
R001
Expiry date:
30/04/2029
Model:
FHSTN (WRAS) - 15mm BSP (M) - 65mm BSP (M) FHSFN (WRAS) - 15mm – 150mm Flanged EJAFN (WRAS) - 50mm – 250mm Flanged EJATN (WRAS) - 15mm BSP (M) – 50mm BSP (M) EJUFN (WRAS) - 15mm – 250mm Flanged EJLFN (WRAS) - 15mm – 250mm Flanged FCSUN (WRAS) - 50 – 200mm Flanged FCSTN (WRAS) - 50 - 200mm Flanged

Approval Holder:
Pipe Solutions Ltd.
Company Name
Pipe Solutions Ltd.
Address
Unit M4b The Matrix Hornbeam Park Avenue Harrogate
Postcode
HG2 8AD
Country
United Kingdom
Phone
01423 878888
General Email
peter.willmott@pipesolutions.co.uk

View All Listings by this Company
Manufacturer:
Pipe Solutions Ltd.
Company Name
Pipe Solutions Ltd.
Address
Unit M4b The Matrix Hornbeam Park Avenue Harrogate
Postcode
HG2 8AD
Country
United Kingdom
Phone
01423 878888
General Email
peter.willmott@pipesolutions.co.uk

View All Listings by this Company

Print This Approval


#2312334

Range of filter housings with plastic bodies. Maximum working pressure 12.0 bar. Cold water use only.

Section:
1050 Filters and Housings
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
½” BSP (M).
Marking:
EBCO (brand of Atlantic Plastics Ltd), date of manufacture (MMYY) on body.
Installation Requirements:
R001 R008
Expiry date:
31/12/2028
Model:
WMB150 - Long Filter Housing Assembly. WMB179 - Short Filter Housing Assembly.

Approval Holder:
Atlantic Plastics Ltd.
Company Name
Atlantic Plastics Ltd.
Address
Coytraherne Close, Brackla, Bridgend
Postcode
CF31 2AX
Country
United Kingdom
Phone
01656672628
General Email
rhodgkiss@atplas.co.uk

View All Listings by this Company
Manufacturer:
Atlantic Plastics Ltd.
Company Name
Atlantic Plastics Ltd.
Address
Coytraherne Close, Brackla, Bridgend
Postcode
CF31 2AX
Country
United Kingdom
Phone
01656672628
General Email
rhodgkiss@atplas.co.uk

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 588 of 820

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.