Range of concealed rough-in sets with brass bodies, intended for use in conjunction with trim and finish sets. Maximum working pressure 10.0 Bar Maximum operating temperature 85.0°C

Section:

1530 Miscellaneous Fittings

Size:

½” BSP (F)

Marking:

Axor on adhesive label

Installation Requirements:

R001 R040

Expiry date:

30/04/2029

Model:

13 129 180 45 442 180 Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.

Product Images

Approval Holder:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, Schiltach

Postcode

77761

Country

Germany

Phone

+49 170 4471 718

General Email

Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Manufacturer:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, Schiltach

Postcode

77761

Country

Germany

Phone

+49 170 4471 718

General Email

Ludovic.hauer@hansgrohe.com

View All Listings by this Company

`UPM3` range of single stage circulator pumps, with stainless steel or plastic bodies, plastic impellers, ceramic shafts and bearings, EPDM 'O'-rings and seals. Maximum working pressure 10.0 bar. Maximum operating temperature 99°C.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

240507701

Size:

Stainless steel body models (N): 1" BSP (M) (retrospectively added June 2024), 1½” BSP (M) & 2” BSP (M). Composite (plastic) body models (CIL3): 1” BSP (M).

Marking:

Grundfos logo, Grundfos and model on top of pump housing. Production number, serial number, and technical information on side of pump housing. Stainless steel models also have a flow arrow on the body.

Installation Requirements:

R001

Expiry date:

31/05/2029

Model:

UPM3 **1-**2 N ***3 (GFNxx-). UPM3 **1-**2 - CIL3 ***3 (GFNxx-). Model added November 2024: ALPHA SOLAR 25-**2 N 180. Where: UPM3 & ALPHA SOLAR = pump type. For UPM3 these can also be: UPM3 HYBRID, UMP3 DHW, UPM3 K, UPM3 AUTO L UPM3 FLEX AS. **1 = size of inlet/outlet connection: N models – 25 = 1 ½”, 32 = 2”. CIL3 models – 15 = 1”. **2 = maximum head (dm): 20, 40, 50, 60, 70, 75 (all models). 105, 145 (stainless steel body models only). N = stainless steel body. CIL3 = composite (plastic) body. ***3 = port to port length in mm: 130 (all models) or 180 (ALPHA SOLAR 1½” model and 2” N models only).

Product Images

Approval Holder:

Grundfos Holding A/S

Company Name

Grundfos Holding A/S

Address

Poul Due Jensens Vej 7 Bjerringbro

Postcode

DK-8850

Country

Denmark

Phone

+36302482216

General Email

oszilagyi@grundfos.com

View All Listings by this Company

Range of horizontal self-priming multistage pumps with stainless steel bodies, stainless steel impellers, shaft and outer sleeve. Maximum working pressure 10.0 Bar Maximum operating temperatures: MH Three phase models 85°C, MH Single phase models 55.0°C and EH sp models 35°C.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

2104082

Size:

EH models: 1 ¼” BSP (F) – 2” BSP (F) EHsp models: 1” BSP (F)

Marking:

Data label showing Franklin electric S.r.l, model number, PMAX and other technical info on body. WRAS label on body. Max temperature on adhesive label on body.

Installation Requirements:

R001 R415

Expiry date:

30/04/2026

Model:

Horizontal Multi-Stage Pumps : 3 MH A XX Z-MM EN 5 MH A XX Z-MM EN 9 MH A XX Z-MM EN 15 MH A XX Z-MM EN 20 MH A XX Z-MM EN Where: A= Pump material: “EMPTY” for AISI 304 and “N” for AISI 316; XX= n. of stages ( 50 Hz single phase): - from 2 to 9 for EH 3 & 5; - from 2 to 6 for EH 9; - from 2 to 3 for EH 15; - 2 for EH 20; n. of stages ( 50 Hz three phase): - from 2 to 9 for EH 3 & 5; - from 2 to 8 for EH 9; - from 2 to 7 for EH 15; - from 2 to 5 for EH 20; n. of stages ( 60 Hz single phase): - from 2 to 7 for EH 3; - from 2 to 5 for EH 5; - from 2 to 3 for EH 9; - No EH 15&20 60Hz single phase; n. of stages ( 60 Hz three phase): - from 2 to 7 for EH 3 & 5; - from 2 to 5 for EH 9; - from 2 to 4 for EH 15; - from 2 to 3 for EH 20; Z=Connection Type: “B” for “Rp” and “P” for “NPT”; MM=motor connection and frequency as follows: 5M=single phase and 50Hz 5T=three phase and 50Hz 6M=single phase and 60Hz 6T=three phase and 60Hz EN= Type of mechanical seal: “E0 – E1 – E2” for EH 3/5/9 ; “E1 – E2” for EH 15/20

Approval Holder:

Franklin Electric SRL

Company Name

Franklin Electric SRL

Address

Via Asolo 7 Dueville Vicenza 36031

Country

Italy

Phone

+39 0444 360366

General Email

info.it@fele.com

View All Listings by this Company

Range of shower riser kits and shower cradle kits. Models PSA006, PSA013, PSA007, PSA012, PSA002, PSA004, also incorporate a manual operated diverter with single lever operating member. Maximum operating temperature 65.0°C

Section:

1650 Shower Outlets

Section Subtitle:

Shower head(s) and/or shower handset(s).

WRAS Approval Number:

240202071

Size:

½” BSP M ¾” BSP M ¾” BSP F 19mm compression fitting

Marking:

Lefroy Brooks logo on body and locking nut.

Installation Requirements:

R001 R040

Expiry date:

28/02/2029

Model:

PSA001 YY PSA002 YY PSA012 YY PSA003 YY PSA004 YY PSA013 YY PSA005 YY PSA006 YY PSA007 YY PBS001 YY PBS002 YY Typical code – PSA001 YY First letters and numbers (e.g. PSA001) – This is the product identification code. This remains constant. Last letters (e.g. YY) – These are replaced with letters representing the colour/plating options available. The number of letters will depend on the finish. Available surface finishes are, but not limited to: - CP - Polished Chrome - NK - Polished Nickel - BC - Brushed Chrome - BN - Brushed Nickel - PB - Polished Brass - BPB - Brushed Brass - AB - Aged Brass - TA - Taunton - AG - Antique Gold - HRG - Hard Rubbed Gold - CM - Champagne Gold - BCM - Brushed Champagne Gold - CO - Copper - MBC - Matt Black Chrome *When ordering test samples please order Chrome (CP) as this finish is readily available*. For bath shower mixers: PSA001 YY Straight riser kit (no diverter). PSA002 YY Straight riser kit with PSA019 diverter. PSA012 YY Straight riser kit with PSA020 diverter. PSA003 YY Cranked riser kit (no diverter). PSA004 YY Cranked riser kit with PSA019 diverter. PSA013 YY Cranked riser kit with PSA020 diverter. For shower valves: PSA005 YY Straight riser kit (no diverter). PSA006 YY Straight riser kit with PSA019 diverter. PSA007 YY Straight riser kit with PSA020 diverter. Bath shower mixer (BSM) shower cradles: PBS001 YY Short BSM hand shower cradle (known within Lefroy Brooks as short BSM hydrant). PBS002 YY Tall BSM hand shower cradle (known within Lefroy Brooks as tall BSM hydrant).

Product Images

Approval Holder:

Lefroy Brooks

Company Name

Lefroy Brooks

Address

Unit 3 Marston Industrial Estate Marston Road Wolverhampton

Postcode

WV2 4LX

Country

United Kingdom

Phone

01902 390 891

General Email

rob@lefroybrooks.co.uk

View All Listings by this Company

Range of shower outlets incorporating brass bodies (various finishes) and NBR ‘O’-rings. Maximum operating temperature 85°C.

Section:

1650 Shower Outlets

Section Subtitle:

Shower head(s) and/or shower handset(s).

WRAS Approval Number:

2205712

Size:

⅜”, ½” and ¾” BSP (F) (all models)

Marking:

Drummonds "DD" logo on body.

Installation Requirements:

R001 R040

Expiry date:

31/05/2027

Model:

Small 65mm Rose for Bath Mixer Handset DAD1220* Shower Rose 130mm (5”) DAD1914A* Shower Rose 200mm (8”) DAD1914* Shower Rose 200mm (8”) – Easy Clean DAD1914EC* Shower Rose 300mm (12”) DAD1903* Shower Rose 300mm (12”) – Easy Clean DAD1903EC* Grand Shower Rose 200mm (8”) DAD1925

Approval Holder:

Drummonds Bathrooms Ltd

Company Name

Drummonds Bathrooms Ltd

Address

Unit 2c Henley Business Park Pirbright Road Normandy Surrey

Postcode

GU3 2DX

Country

United Kingdom

General Email

nick@drummonds-uk.com

View All Listings by this Company