Range of single check valve assemblies with DZR brass bodies. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

0030 Backflow Prevention Devices

Section Subtitle:

SCHEDULE 2 - Section 6.2 Type EB - Non verifiable single check valve.

WRAS Approval Number:

2109067

Size:

15mm (1CVF005), 22mm (1CVF007) or 28mm (1CVF009) Compression

Marking:

Albion logo (A), CR, size, PN and flow arrow on body.

Installation Requirements:

R001

Expiry date:

30/09/2026

Model:

ART 39 15mm, ART 39 22mm & ART 39 28mm

Approval Holder:

Albion Valves (UK) Limited

Company Name

Albion Valves (UK) Limited

Address

9a Fallbank Industrial Estate Dodworth Barnsley

Postcode

S75 3LS

Country

United Kingdom

Phone

01226 729900

General Email

samjed@albionvalvesuk.com

View All Listings by this Company

Range of flushing valves (gunmetal body) which incorporate a screw down stop valve, spherical valve and air gap to drain. Maximum working pressure 10.0 bar. Cold water use only.

Section:

0046 Backflow Prevention Devices

Section Subtitle:

Tundish(s) air break to drain.

WRAS Approval Number:

2212329

Size:

Range of flushing valves (gunmetal body) which incorporate a screw down stop valve, spherical valve and air gap to drain. Maximum working pressure 10.0 bar. Cold water use only.

Marking:

Kemper on body.

Installation Requirements:

R001 R415 R570

Expiry date:

31/12/2027

Model:

KHS Flush Point range comprising of model codes: 6840001500, 6840101500, 6840401500 & 6840501500.

Approval Holder:

Gebr. Kemper GmbH+Co. KG

Company Name

Gebr. Kemper GmbH+Co. KG

Address

Harkortstr. 5 Olpe

Postcode

57462

Country

Germany

Phone

+49 2761 8910

General Email

h.u.gall@gall-engineering.de

View All Listings by this Company

Range of aerators/flow regulators with chrome plated brass bodies, incorporating silicon seals. The products also incorporate either plastic (SB-STA ASQPQ 023A & SB-TA ASQPQ 011) or stainless-steel strainers (SB-ILFR). Open outlet use only.

Non-metallic materials and components comply with BS6920 at 85°C

Section:

0435 Taps and shower valves - Components

Section Subtitle:

Aerators, Flow Straighteners, Flow Regulators and Restrictors.

WRAS Approval Number:

2212051

Size:

M22 (M) - SB-STA ASQPQ 023A, M22 (f) - SB-TA ASQPQ 011 and SB-ILFR.

Marking:

ShowerBob on body.

Installation Requirements:

R001 R040

Expiry date:

31/12/2027

Model:

AERATORS SB-STA ASQPQ 023A SB-TA ASQPQ 011 FLOW REGULATORS SB-ILFR

Approval Holder:

BOB Products Limited

Company Name

BOB Products Limited

Address

Avalon House High Street Chalford Stroud Gloucestershire

Postcode

GL6 8DS

Country

United Kingdom

General Email

nigel@showerbob.co.uk

View All Listings by this Company

Range of single hole, single outlet pull out spray, combination tap assemblies (brass bodies, various finishes – see models) incorporating ceramic cartridge headworks with single lever operating members controlling the hot and cold and a quarter turn ceramic disk headwork with a dome type operating member controlling chilled water supply. The spout outlet incorporates a plastic aerator. The inlet from the tap to the pull-out spray hose incorporates an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 Bar.

Non-metallic materials and components comply with BS6920 at 60°C

Section:

0445 Combination Tap Assemblies

Section Subtitle:

Tap(s) incorporating a pull-out/pull down spray where the airgap cannot be maintained after motive force is removed.

WRAS Approval Number:

2212054

Size:

Polyamide braided PEX lined flexible hose assemblies incorporating 3/8" BSP (F) captive nut end connections.

Marking:

Grohe on body

Installation Requirements:

R001 R009 R090

Expiry date:

31/12/2027

Model:

30601000 - Minta pull-out duo L-spout chrome, 30601DC0 - Minta pull-out duo L-spout supersteel, 30590000 - Minta pull-out duo L-spout chrome, 30590DC0 - Minta pull-out duo L-spout supersteel, 30590KF0 - Minta pull-out duo L-spout matt black. Models added June 2023: 416967045 - Minta pull-out duo L-spout chrome, 416967DC4 - Minta pull-out duo L-spout supersteel, 416967KF4 - Minta pull-out duo L-spout matt black.

Approval Holder:

Grohe AG

Company Name

Grohe AG

Address

Industriepark Edelburg Hemer

Postcode

58675

Country

Germany

Phone

02372 930

General Email

marc.engelhardt@lixil.com

View All Listings by this Company

Single hole, single outlet (fixed) combination tap assembly (chromium plated brass), incorporating a ceramic cartridge headwork and single lever operating member. The spout outlet incorporates a plastic aerator. Model 32 020 000 is supplied with a pop-up waste. Maximum working pressure 10.0 Bar.

Non-metallic materials and components comply with BS6920 at 70°C

Section:

0450 Combination Tap Assemblies

Section Subtitle:

Single hole tap(s) with a single outlet and a fixed spout.

WRAS Approval Number:

2212067

Note:

No testing performed on pop up waste.

Size:

Stainless steel braided PEX lined flexible hose assemblies with ⅜” captive nut end connections.

Marking:

Hansgrohe on operating member.

Installation Requirements:

R001 R006 R009 R010

Expiry date:

31/12/2027

Model:

32 020 xxx - Talis S (with Pop-up Waste). 32 031 xxx - Talis S Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.

Approval Holder:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, Schiltach

Postcode

77761

Country

Germany

Phone

+49 170 4471 718

General Email

Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Manufacturer:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, Schiltach

Postcode

77761

Country

Germany

Phone

+49 170 4471 718

General Email

Ludovic.hauer@hansgrohe.com

View All Listings by this Company