Directory Search Results

Print List

#2301335

Range of concealed WC flushing cisterns incorporating a side entry compact type float operated inlet valve providing a Type AG air gap with a dual flush drop valve for full flush volumes of up to 6 litres and a reduced flush of up to 3.5 litres. The cistern is operated by an electronically controlled flush valve. The product also incorporates a servicing valve and flexible hose on the inlet supply. Maximum working pressure 10.0 bar. Cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2301335
Size:
½” BSP (M)
Marking:
OLI etched on flush panel; OLI, OLI120 Plus Elect, Date of manufacturer DD.MM.YY on adhesive label, 6L & waterline mould on plastic support for flush valve
Installation Requirements:
R001 R556 R581
Expiry date:
31/01/2028
Model:
OLI 120 Plus Electronic

Approval Holder:
Oli-Sistemas Sanitarios, S.A
Company Name
Oli-Sistemas Sanitarios, S.A
Postcode
3800-314 Aveiro
Country
Portugal
General Email
geral@oli-world.com

View All Listings by this Company
Manufacturer:
Oli-Sistemas Sanitarios, S.A
Company Name
Oli-Sistemas Sanitarios, S.A
Postcode
3800-314 Aveiro
Country
Portugal
General Email
geral@oli-world.com

View All Listings by this Company

Print This Approval


#2303016

Range of inlet control valves with DZR brass bodies incorporating a pressure reducing valve (set at 1.5, 1.8. 2.0, 2.1, 3.0 or 3.5 depending on model) and a pressure relief valve (set at 3.0, 3.5, 4.5, 5.0. 6.0 or 8.0 depending on model. All models incorporate a stainless-steel mesh and an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. Model CWIC355040 comes supplied with a tundish. For use with copper pipe to BS EN 1057, PB pipe (with inserts) to BS EN 7291-2:2010 and PEX pipe (with inserts) to BS EN 7291-3:2010. Maximum working pressure 16.0. Maximum operating temperature of 25°C.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2303016
Size:
22mm compression fittings inlet and outlet.
Marking:
RWC, SYR, DR and Flow Arrow on Valve Body. Reliance Water Controls and Pressure on Pressure Reducing Ring. SYR and Flow Arrow on Pressure Relief Valve. Reliance Water Controls and Pressure on Pressure Relief Cap.
Installation Requirements:
R001 R120
Expiry date:
31/03/2028
Model:
CWIC355025, CWIC355026, CWIC355030, CWIC355035, CWIC355040, CWIC355045, CWIC355050, CWIC355055, CWIC355060, CWIC355065, CWIC355070, CWIC355090, CWIC355200.

Approval Holder:
Reliance Worldwide Corporation (UK)
Company Name
Reliance Worldwide Corporation (UK)
Address
Horton Road, West Drayton
Postcode
UB7 8JL
Country
United Kingdom
Phone
+44 7730 052060
General Email
PETER.LANCASTER@RWC.COM

View All Listings by this Company

Print This Approval


#2304026

Spring loaded resilient trim in-line check valve cartridge with acetal body, incorporating a stainless-steel spring and EPDM ‘O’-rings. To be housed in a specifically dimensioned body. Maximum working pressure 16 Bar

Non-metallic materials and components comply with BS6920 at 85°C

Section:
0026 Backflow Prevention Devices
Section Subtitle:
Check Valve Cartridge(s) The cartridges listed in this section are for factory installation only and are not suitable for on-site installation.
WRAS Approval Number:
2304026
Size:
DN15
Marking:
Tecno Alpha logo, DN, WRAS, Flow arrow on body
Installation Requirements:
R001
Expiry date:
30/04/2028
Model:
VLA01DN15

Approval Holder:
Tecno Alfa S.R.L
Company Name
Tecno Alfa S.R.L
Address
Via Rossini, 27 Sale Marasino
Postcode
25057
Country
Italy
Phone
+39 030 986 587
General Email
info@technoalfa.net

View All Listings by this Company

Print This Approval


#2304033

Range of non-verifiable single check valve assemblies with DZR brass bodies. Maximum working pressure 16.0 bar.

Non-metallic materials and components comply with BS6920 at 85°C

Section:
0030 Backflow Prevention Devices
Section Subtitle:
Non-verifiable single check valve assembly - Type EB. Providing Fluid Category 2 protection. Verified by test.
WRAS Approval Number:
2304033
Size:
See Models
Marking:
IDC “E” logo. PN, Size, CR and flow arrow on body
Installation Requirements:
R001
Expiry date:
30/04/2028
Model:
ACV0040101 (1/2” BSP (F)), ACV0040201 (3/4” BSP (F)), ACV0040301 (1” BSP (F)), ACV0040401 (1.1/4” BSP (F)), ACV0040501 (1.1/2” BSP (F)), ACV0040601 (2” BSP (F))

Approval Holder:
IDC Plumbing & Heating Technology (Beijing) Co., Ltd.
Company Name
IDC Plumbing & Heating Technology (Beijing) Co., Ltd.
Address
3rd Floor, Unit 2, Building 2, Section A Zhaowei Science & Technology Park No. 14, Jiuxianqiao Road Chaoyang District Beijing
Postcode
100015
Country
China
Phone
008610 51659550 ext 312
General Email
Jerry.tang@idcgroup.com.cn

View All Listings by this Company
Manufacturer:
IDC Plumbing & Heating Technology (Beijing) Co., Ltd.
Company Name
IDC Plumbing & Heating Technology (Beijing) Co., Ltd.
Address
3rd Floor, Unit 2, Building 2, Section A Zhaowei Science & Technology Park No. 14, Jiuxianqiao Road Chaoyang District Beijing
Postcode
100015
Country
China
Phone
008610 51659550 ext 312
General Email
Jerry.tang@idcgroup.com.cn

View All Listings by this Company

Print This Approval


#2304009

Range of wall mounted, electrically heated catering water boilers with inlet supply controlled via a solenoid valve. The water is discharged via a self-closing tap with single lever operating member. Maximum working pressure 10.0 Bar Maximum operating temperature 98.0°C

Section:
0060 Boilers
Section Subtitle:
Catering, Feed Cistern or Pressure.
WRAS Approval Number:
2304009
Size:
15mm compression
Marking:
Hyco Microboil on front panel. Model and product info on adhesive label on underside.
Installation Requirements:
R001 R040 R150
Expiry date:
30/04/2028
Model:
Microboil Smart: MS3W MS6W MS10W MS3SS MSS6S MS10SS

Approval Holder:
Hyco Manufacturing Ltd.
Company Name
Hyco Manufacturing Ltd.
Address
Unit 1 & 2 Normandy Court, Express Way, West Yorkshire
Postcode
WF10 5NR
Phone
01924 225 200

View All Listings by this Company
Manufacturer:
Hyco Manufacturing Ltd.
Company Name
Hyco Manufacturing Ltd.
Address
Unit 1 & 2 Normandy Court, Express Way, West Yorkshire
Postcode
WF10 5NR
Phone
01924 225 200

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 565 of 1773

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.